Welcome to Social Bookmarking Website

Description: The Hamilton Beach 990221600 Extractor Funnel helps guide ingredients smoothly through compatible extraction and blending equipment for efficient operation. This funnel is designed to channel liquids or food products into the processing area while helping reduce spills and improve transfer control during use. It works by directing ingredients into the correct position within the equipment, supporting steady flow and more organized preparation. Built for routine commercial foodservice applications, it provides a practical fit for designated equipment setups and replacement needs. The Hamilton Beach Extractor Funnel also helps improve workflow efficiency, support cleaner operation, and contribute to reliable day-to-day performance during food and beverage preparation.

Category:

Tag: #HamiltonBeach #990221600

Description: The TRUE 810812 refrigerator door gasket helps maintain a secure door seal to support consistent cooling performance and reduce cold air loss. Designed as a Type-R black gasket, this component fits around the refrigerator door edge and creates a tight seal when the door closes, helping keep internal temperatures stable and preventing excess energy use. Its durable construction supports reliable daily operation in commercial refrigeration environments while helping reduce strain on cooling systems. Measuring 24-3/8" x 26", the gasket is suited for replacing worn or damaged seals that may cause temperature fluctuations, moisture buildup, or inefficient operation. The flexible design also helps provide a proper fit for smoother door closing and dependable sealing performance.

Category:

Tag: #TRUE #810812 #RefrigeratorDoorBlackGasket

Description: The Delfield 3516095 Refrigerator Evaporator Coil 19" x 5" x 4" helps maintain consistent cooling performance in compatible commercial refrigeration equipment. This evaporator coil is designed to absorb heat from inside the refrigerator, allowing the refrigeration system to lower and maintain internal cabinet temperatures. It works by circulating refrigerant through the coil, where heat is transferred away from stored contents and released through the system’s cooling cycle. Measuring 19" x 5" x 4", it is built to fit designated equipment configurations for reliable operation. The Delfield Refrigerator Evaporator Coil also helps support efficient temperature control, improve cooling consistency, and contribute to dependable refrigeration performance and routine maintenance.

Category:

Tag: #Delfield #3516095

Description: #Delfield #3516095

Category:

Tag: #Delfield #3516095

Description: The Super Systems 704410 Grill Humidity Element 120V/1250W helps maintain moisture levels for consistent cooking performance in compatible commercial grill equipment. This humidity element is designed to generate heat that creates steam or controlled humidity within the cooking environment, helping support moisture retention during food preparation. Operating at 120V and 1250W, it works by heating water within the system to produce humidity that circulates through the grill chamber as needed. Built for routine commercial kitchen use, it supports dependable operation in demanding cooking environments.

Category:

Tag: #SuperSystems #704410

Description: The Southbend 1062599 Range Broiler Air Filter is designed to maintain clean airflow for consistent broiler performance in commercial kitchens. Measuring 10" x 20" x 1", this filter works by capturing grease, dust, and airborne particles as air circulates through the system, helping prevent buildup on internal components. By supporting proper airflow, it helps maintain stable temperatures and reliable equipment operation. Cleaner air circulation can also contribute to improved efficiency and reduced strain on the system. Its standard size allows for proper fit in compatible units, while the replaceable design supports routine maintenance and long-term performance.

Category:

Tag: #Southbend #1062599

Description: The Vulcan Hart 962067-00001 Oven Pilot Safety Valve 3/8" helps provide safe and controlled gas regulation in compatible commercial oven systems. This safety valve is designed to manage gas flow to the pilot assembly while automatically shutting off the gas supply if the pilot flame is extinguished. It works by sensing pilot flame presence and allowing gas to continue flowing only when ignition is active, helping maintain safe burner operation during cooking. The 3/8-inch connection supports compatibility with designated gas line setups in commercial kitchen equipment. Built for routine service applications, the Vulcan Hart Oven Pilot Safety Valve helps support reliable ignition performance, improve operational safety, and contribute to dependable oven functionality.

Category:

Tag: #VulcanHart #962067-00001

Description: The Hoshizaki 4A0893-07 Fuse helps protect compatible commercial equipment from electrical overload and circuit damage during operation. This fuse is designed as a safety component that interrupts the electrical circuit when current exceeds a safe level, helping prevent damage to sensitive internal components. It works by breaking the connection when excessive current passes through it, stopping the flow of electricity until the issue is addressed and the fuse is replaced. Built for routine service and replacement applications, it supports safe electrical performance in demanding commercial environments. The Hoshizaki Fuse also helps improve equipment protection, reduce the risk of electrical failure, and contribute to reliable day-to-day system operation and maintenance.

Category:

Tag: #Hoshizaki #4A0893-07

Description: The True 810805 Refrigerator Door Gasket Black 20-3/4" x 30" helps maintain a secure door seal to support consistent cooling performance in compatible refrigeration equipment. This door gasket is designed to create a tight seal around the refrigerator door perimeter, helping reduce air leaks when the door is closed. It works by compressing against the cabinet frame to keep cold air inside while limiting the entry of warm external air. Measuring 20-3/4" x 30", it is suited for designated equipment configurations and routine replacement needs. The True Refrigerator Door Gasket also helps improve energy efficiency, support stable internal temperatures, and contribute to reliable refrigeration performance and maintenance.

Category:

Tag: #True #810805

Description: The Montague 35187-3 Burner Head provides dependable flame distribution for compatible commercial cooking equipment. This burner head is designed to direct gas evenly through its ports, creating a stable flame pattern for consistent heat output during cooking operations. It works by channeling gas from the burner system through precisely positioned openings, where ignition produces controlled flames across the cooking surface. Built for routine use in commercial kitchen environments, it supports reliable heating performance for a range of cooking applications. The Montague Burner Head also helps maintain even heat distribution, support efficient burner operation, and contribute to dependable equipment performance and maintenance over time.

Category:

Tag: #Montague #35187-3

Description: The Jade Range 1215300100 Infrared Broiler Burner provides concentrated radiant heat for compatible commercial broiler equipment, supporting efficient high-temperature cooking performance. Measuring 5-1/8" x 24-1/8", this burner is designed to generate infrared heat that transfers directly to food surfaces for broiling, searing, and finishing applications. It works by igniting gas across the burner surface, which radiates intense, even heat to deliver consistent cooking results. Built for demanding commercial kitchen use, it supports reliable heat output and effective cooking across the broiler area. The Jade Range Infrared Broiler Burner also helps maintain consistent performance, improve cooking efficiency, and contribute to dependable day-to-day equipment operation and maintenance.

Category:

Tag: #JadeRange #1215300100

Description: The Bunn 39000.1004 Easy Clear Water Filter Cartridge EQHP-10 helps improve water quality for compatible beverage equipment by reducing unwanted impurities before use. This water filter cartridge is designed to filter incoming water, helping reduce sediment, taste, odor, and scale-forming minerals that can affect equipment performance and beverage consistency. It works by passing water through specialized filtration media, allowing cleaner water to move through the system for brewing or dispensing applications. Built for routine commercial use, it supports consistent water flow and dependable filtration performance. Easy Clear Water Filter Cartridge EQHP-10 also helps support equipment longevity, reduce maintenance caused by scale buildup, and contribute to reliable day-to-day operation.

Category:

Tag: #Bunn #39000.1004

Description: The Vulcan Hart 720719 Oven Pilot Safety Valve 3/8" helps support safe and controlled gas flow in compatible commercial oven systems. This safety valve is designed to regulate gas delivery to the pilot assembly while helping shut off the gas supply if the pilot flame is lost. It works by sensing the presence of the pilot flame and allowing gas to continue flowing only when ignition is maintained, supporting safe burner operation during cooking. The 3/8-inch connection allows compatibility with designated gas line configurations. Built for routine commercial kitchen use, the Vulcan Hart Oven Pilot Safety Valve helps improve operational safety, support reliable ignition performance, and contribute to dependable oven functionality.

Category:

Tag: #Bunn #39000.1004

Description: The Vulcan Hart 720719 Oven Pilot Safety Valve 3/8" helps support safe and controlled gas flow in compatible commercial oven systems. This safety valve is designed to regulate gas delivery to the pilot assembly while helping shut off the gas supply if the pilot flame is lost. It works by sensing the presence of the pilot flame and allowing gas to continue flowing only when ignition is maintained, supporting safe burner operation during cooking. The 3/8-inch connection allows compatibility with designated gas line configurations. Built for routine commercial kitchen use, the Vulcan Hart Oven Pilot Safety Valve helps improve operational safety, support reliable ignition performance, and contribute to dependable oven functionality.

Category:

Tag: #VulcanHart #720719

Description: The Garland G01106-2 Electric Range Oven Section Lower Element 240V 3.5kW provides consistent bottom heat for compatible commercial electric oven systems. This lower heating element is designed to convert electrical energy into heat, supporting the temperatures needed for baking, roasting, and general food preparation. Operating at 240V with a 3.5kW output, it works by heating evenly across the lower oven section to promote balanced temperature distribution throughout the cavity. Built for routine commercial kitchen use, it supports reliable thermal performance during demanding cooking operations, improves heating efficiency, and contributes to dependable oven operation and maintenance.

Category:

Tag: #VulcanHart #720719

Description: The Garland G01106-2 Electric Range Oven Section Lower Element 240V 3.5kW provides consistent bottom heat for compatible commercial electric oven systems. This lower heating element is designed to convert electrical energy into heat, supporting the temperatures needed for baking, roasting, and general food preparation. Operating at 240V with a 3.5kW output, it works by heating evenly across the lower oven section to promote balanced temperature distribution throughout the cavity. Built for routine commercial kitchen use, it supports reliable thermal performance during demanding cooking operations, improves heating efficiency, and contributes to dependable oven operation and maintenance.

Category:

Tag: #Garland #G01106-2

Description: The Rankin Delux GT-18 BJ Thermostat Bezel provides a clean and secure mounting finish for thermostat controls on compatible commercial cooking equipment. This bezel is designed to frame and support the thermostat control area, helping keep the control knob properly aligned while protecting the surrounding panel opening. It works by fitting around the thermostat shaft or mounting point, creating a stable interface between the control component and equipment surface. Built for routine commercial use, it supports both functionality and a neat equipment appearance,improves control accessibility, and contributes to reliable day-to-day equipment operation.

Category:

Tag: #RankinDelux #GT-18 BJ

Description: The SALVAJOR KSH123 Disposer 75 Bearing & Seal Kit helps maintain smooth and leak-resistant operation in compatible commercial disposer systems. This kit is designed to replace worn bearings and seals that support rotating components and protect the unit from moisture intrusion during operation. It works by allowing internal moving parts to rotate with reduced friction while the seals help prevent leaks and contamination from reaching critical components. Suitable for routine maintenance and repair applications, the kit supports dependable disposer functionality in demanding commercial environments.

Category:

Tag: #SALVAJOR #KSH123

Description: The Imperial 1623 Fryer Drain Valve W/ Handle provides controlled oil drainage for compatible commercial fryer systems. This drain valve is designed to allow operators to safely release used cooking oil from the fryer tank during cleaning and maintenance procedures. It works by opening and closing the internal flow passage through the attached handle, helping manage the movement of hot oil with improved control and convenience. Built for routine commercial kitchen use, the valve supports dependable sealing and smooth operation during draining tasks,supports efficient oil management, and contributes to reliable day-to-day equipment functionality in demanding foodservice environments.

Category:

Tag: #Imperial #1623

Description: The Cleveland 43895 Corrosion Prevention Anode Assembly helps protect compatible commercial equipment from corrosion and mineral-related wear. This anode assembly is designed to reduce the effects of corrosion by attracting corrosive elements away from critical metal components within the system. It works through a sacrificial process in which the anode material gradually deteriorates instead of the surrounding equipment surfaces, helping extend the service longevity of internal components. Suitable for routine commercial applications, the assembly supports dependable equipment performance and ongoing system protection, helps reduce maintenance concerns, support efficient operation, and contribute to the long-term reliability of compatible foodservice equipment.

Category:

Tag: #Cleveland #43895

Description: The Bakers Pride R3019X Char Broiler Air Mixer Plate F/ 2-1/8 OD helps support proper air and gas mixing for efficient char broiler burner performance. This air mixer plate is designed to regulate airflow entering the burner system, helping create a balanced air-to-gas mixture for stable combustion during cooking operations. It works by controlling the amount of air blended with gas before ignition, supporting consistent flame quality and heat distribution across the cooking surface. Designed for compatible commercial char broilers, it contributes to reliable burner operation in demanding kitchen environments, supports steady cooking performance, and simplifies routine maintenance or replacement tasks.

Category:

Tag: #BakersPride #R3019X

Description: The Jackson 6685-004-17-27 Dishmachine Electronic Dual Thermostat helps maintain accurate temperature regulation in compatible commercial dishwashing equipment. This electronic dual thermostat is designed to monitor and control multiple temperature points within the dishmachine, supporting proper washing and rinsing performance during operation. It works by sensing temperature changes and sending signals to the control system to adjust heating functions as needed for consistent results. Built for demanding commercial kitchen environments, it supports reliable thermal management and efficient equipment functionality. also helps improve temperature consistency, support effective cleaning performance, and contribute to dependable day-to-day dishmachine operation and maintenance.

Category:

Tag: #Jackson #6685-004-17-27

Description: The Blakeslee 02255 Pump Seal Assembly helps maintain leak-resistant performance in compatible commercial pumping systems. This assembly is designed to create a secure seal between rotating and stationary pump components, helping prevent fluid leakage during operation. It works by maintaining controlled contact within the pump system, reducing the escape of liquids while supporting smooth mechanical movement. Built for routine commercial equipment use, the seal assembly helps protect internal components from wear caused by moisture or pressure loss and contributes to consistent equipment performance in demanding service environments.

Category:

Tag: #Blakeslee #02255

Description: The Blodgett 57562 RTD Temperature Probe With Lit 1k Ohm 3/16" Terminals provides accurate temperature sensing for compatible commercial cooking equipment. This RTD temperature probe is designed to monitor heat levels and transmit precise resistance-based readings to the control system, helping maintain consistent operating temperatures during cooking processes. It works by changing electrical resistance in response to temperature variations, allowing the equipment to adjust heating performance as needed. The 3/16-inch terminals support secure electrical connections for dependable operation in commercial kitchen environments. The Blodgett RTD Temperature Probe also helps improve temperature accuracy, support reliable equipment functionality, and contribute to efficient maintenance and consistent cooking performance.

Category:

Tag: #Blodgett #57562

Description: The Manitowoc 000013508 Ice Machine Fan Cycle Pressure Switch helps regulate cooling system performance in compatible ice machine applications. This pressure switch is designed to monitor refrigerant pressure levels and control the fan cycle to support efficient heat exchange during ice production. It works by activating or deactivating the condenser fan based on system pressure changes, helping maintain stable operating conditions and consistent equipment performance. Built for commercial ice machine environments, it supports reliable temperature management and proper system functionality during routine operation. The Manitowoc Ice Machine Fan Cycle Pressure Switch also helps improve energy efficiency, reduce unnecessary fan operation, and contribute to dependable ice machine maintenance and performance.

Category:

Tag: #Manitowoc #000013508

Description: The Southbend 1011299 Oven Thermostat W/ 3/16" X 11-5/8" Bulb helps maintain accurate temperature control in compatible commercial oven systems. This thermostat is designed to monitor oven heat and regulate burner or heating element operation to support consistent cooking performance. It works through the sensing bulb, which detects temperature changes inside the oven cavity and signals the thermostat to adjust heat output as needed. The 3/16-inch by 11-5/8-inch bulb size supports compatibility with designated equipment configurations. Built for routine commercial kitchen use, the Southbend Oven Thermostat helps improve temperature consistency, support reliable oven functionality, and contribute to efficient cooking and maintenance operations.

Category:

Tag: #Southbend #1011299

Description: The Glastender 06003951 Lead Probe helps support accurate sensing and reliable electrical connectivity in compatible commercial equipment systems. This probe is designed to detect or transmit electrical signals within the equipment, allowing connected components to respond properly during operation. It works by carrying signals or measurements between system controls and monitored areas, helping maintain consistent functionality and operational performance. Built for routine commercial use, the probe supports dependable communication between electrical components in demanding service environments. The Glastender Lead Probe also helps improve equipment reliability, simplify maintenance or replacement tasks, and contribute to smooth day-to-day operation of compatible commercial systems.

Category:

Tag: #Glastender #06003951

Description: The Frymaster 8262212 Fryer Probe Replacement Kit helps maintain accurate temperature monitoring for compatible commercial fryer systems. This replacement kit is designed to restore proper sensing performance by detecting oil temperature and sending signals to the fryer control system for consistent heat regulation. It works by measuring temperature changes within the fryer and helping the equipment adjust heating output as needed during cooking operations. Suitable for routine maintenance and replacement tasks, the kit supports reliable fryer functionality in demanding kitchen environments. The Frymaster Fryer Probe Replacement Kit also helps improve temperature consistency, support efficient cooking performance, and reduce issues caused by worn or malfunctioning temperature sensing components.

Category:

Tag: #Frymaster #8262212

Description: The Royal Range 3231 Pilot Burner W/Bell Orifice Natural Gas provides dependable pilot flame ignition for compatible commercial cooking equipment. This pilot burner is designed to maintain a steady flame that ignites the main burner during operation, supporting consistent heating performance in commercial kitchen environments. The included bell orifice helps regulate natural gas flow to create a controlled and stable pilot flame for reliable burner activation. It works by directing gas through the pilot assembly, where ignition produces the flame needed for efficient equipment operation. The Royal Range Pilot Burner W/Bell Orifice Natural Gas also helps support smooth startup performance, reduce ignition interruptions, and contribute to reliable day-to-day cooking equipment functionality.

Category:

Tag: #RoyalRange #3231

Description: The Jade Range 4616600100 Pilot Burner provides reliable flame ignition support for compatible commercial cooking equipment. This pilot burner is designed to produce a steady flame that ignites the main burner when heat is required during operation. It works by directing a controlled flow of gas through the burner assembly, where ignition creates a stable pilot flame to support safe and consistent burner activation. Built for routine use in commercial kitchen environments, it helps maintain dependable heating performance and proper equipment functionality. The Jade Range Pilot Burner also supports efficient gas ignition, helps reduce operational interruptions, and contributes to reliable cooking equipment performance and maintenance.

Category:

Tag: #JadeRange #4616600100

Description: The Frymaster 8102155 Fryer 3-Way Flame Pilot Burner 1/4" Tube provides reliable pilot flame distribution for compatible commercial fryer systems. This pilot burner is designed to ignite and maintain burner operation by directing flame to multiple ignition points through its 3-way configuration. The 1/4-inch tube supports controlled gas flow, helping create a stable and consistent pilot flame during fryer operation. It works by supplying gas to the pilot assembly, where ignition produces the flame needed to activate the main burners safely and efficiently. Built for demanding commercial kitchen environments, the Frymaster Fryer 3-Way Flame Pilot Burner helps support dependable heating performance, consistent ignition, and efficient fryer maintenance.

Category:

Tag: #Frymaster #8102155

Description: The Frymaster 8102071 Fryer Natural Gas Pilot Assembly W/ .024 Orifice helps maintain reliable ignition and burner operation in compatible commercial fryer systems. This pilot assembly is designed to deliver a steady pilot flame that ignites the main burner when heat is required during cooking operations. The included .024 orifice helps regulate natural gas flow for controlled and consistent flame performance. It works by directing gas through the pilot system, where ignition creates a stable flame to support safe burner activation. Built for commercial kitchen environments, the Frymaster Fryer Natural Gas Pilot Assembly helps support dependable heating performance, improve operational consistency, and simplify maintenance or replacement tasks.

Category:

Tag: #Frymaster #8102071

Description: The Garland 227005 Range Burner Valve W/O Orifice provides controlled gas flow regulation for compatible commercial range equipment. This burner valve is designed to manage the amount of gas supplied to the burner, allowing operators to adjust heat levels for different cooking applications. It works by opening, restricting, or shutting off gas flow through the control mechanism, helping maintain consistent burner performance during operation. Supplied without an orifice, it offers flexibility for compatible system configurations and maintenance requirements. Built for routine commercial kitchen use, the Garland Range Burner Valve helps support reliable temperature control, smooth equipment operation, and efficient maintenance or replacement in demanding foodservice environments.

Category:

Tag: #Garland #227005

Description: The Garland GL2298300 Oven Aluminized Steel Burner provides dependable heat distribution for compatible commercial oven systems. This burner is designed to generate and direct heat evenly within the oven cavity, supporting consistent cooking and baking performance during daily operation. Constructed from aluminized steel, it helps resist heat-related wear while maintaining durability in demanding kitchen environments. The burner works by distributing gas through precisely positioned openings, where ignition creates controlled flames for efficient heat transfer. Suitable for routine commercial use, the Garland Oven Aluminized Steel Burner helps maintain stable oven temperatures, supports reliable equipment functionality, and contributes to efficient food preparation and ongoing kitchen maintenance.

Category:

Tag: #Garland #GL2298300

Description: The Ultrafryer 18185 Fryer Momentary Door Micro Switch 15A 250V/125V helps support safe and responsive operation in compatible commercial fryer systems. This electrical micro switch is designed to detect door movement and temporarily activate or interrupt a circuit when the fryer door is opened or closed. It works through a momentary contact mechanism that responds quickly to pressure or movement, helping maintain proper equipment control and operational safety. Rated for 15A at 250V/125V, it is suitable for demanding commercial kitchen environments. The Ultrafryer Fryer Momentary Door Micro Switch also helps improve equipment reliability, support consistent performance, and simplify maintenance or replacement tasks during routine service.

Category:

Tag: #Ultrafryer #18185

Description: The Ultrafryer 17034 Blower Motor 115/208-230V helps maintain proper airflow and consistent performance in compatible commercial fryer systems. This blower motor is designed to generate and circulate air required for efficient burner operation and heat distribution during cooking processes. It works by converting electrical energy into mechanical motion, driving the blower assembly to support steady airflow within the equipment. Compatible with multiple voltage applications, it is built for dependable use in demanding kitchen environments. The Ultrafryer 17034 Blower Motor helps support efficient heating performance, reduce airflow inconsistencies, and contribute to reliable fryer operation and routine equipment maintenance in commercial foodservice settings.

Category:

Tag: #Ultrafryer #17034

Description: The Nieco 4144 Gear Motor provides controlled mechanical power for compatible commercial foodservice equipment applications. This gear motor is designed to combine an electric motor with a gear reduction system, allowing it to deliver steady torque and controlled rotational speed for moving internal components efficiently. It works by converting electrical energy into mechanical motion while reducing speed to support smooth and reliable equipment operation. Built for routine commercial use, the motor helps maintain consistent performance in demanding kitchen environments. The Nieco Gear Motor also supports dependable movement control, helps reduce strain on connected parts, and contributes to efficient equipment functionality and easier maintenance over time.

Category:

Tag: #Nieco #4144 #GearMotor

Description: The Manitowoc 020003650 Ice Machine Motor/Reducer Assembly helps support smooth and controlled mechanical operation in compatible ice machine systems. This assembly combines a motor and speed reducer to transfer power efficiently while regulating rotational speed for proper equipment function during the ice production process. It works by converting electrical energy into controlled mechanical movement, helping drive internal components with consistent performance. Designed for commercial ice machine applications, the assembly supports reliable operation in demanding service environments. The Manitowoc Ice Machine Motor/Reducer Assembly also helps reduce strain on connected components, support routine maintenance needs, and contribute to dependable ice machine performance and operational efficiency.

Category:

Tag: #Manitowoc #020003650

Description: The Southbend SOU1173545CP Oven Rack provides a stable and reliable surface for holding cookware and food items during commercial oven operation. Designed for compatible oven systems, this rack supports proper airflow around products to help promote even heat distribution and consistent cooking results. Its durable construction allows it to withstand routine high-temperature use in demanding kitchen environments while maintaining dependable support for trays, pans, and baking dishes. The rack fits securely within the oven cavity, helping organize cooking space and improve efficiency during food preparation. The Southbend Oven Rack also supports easier loading and unloading while contributing to consistent oven performance and everyday kitchen productivity.

Category:

Tag: #Southbend #SOU1173545CP

Description: The Duke 153643 Oven Element Assembly W/Screw Terminals 23.5" X 15" X 9" delivers consistent heat generation for compatible commercial oven systems. This heating element assembly is designed to convert electrical energy into controlled heat, helping ovens maintain proper cooking temperatures for baking and food preparation tasks. The screw terminal connections support secure electrical installation and stable current flow during operation. Its structured design and specified dimensions allow it to fit compatible equipment while promoting even heat distribution inside the oven cavity. Built for routine commercial kitchen use, the Duke 153643 Oven Element Assembly helps support reliable cooking performance, simplify maintenance procedures, and contribute to efficient day-to-day oven operation.

Category:

Tag: #Duke #153643

Description: The Kolpak 236001075 Refrigerator Reversible Cam Lift Hinge provides dependable door support and smooth operation for compatible commercial refrigeration equipment. Designed with a reversible configuration, this hinge allows flexible door orientation to suit different installation layouts and workspace requirements. The cam lift mechanism works by slightly raising the door as it opens and guiding it back into position when closing, helping maintain proper sealing and alignment. Its brushed chrome finish supports durability and a clean appearance in commercial environments. Measuring 8 inches long and 7 inches wide, the hinge helps improve door functionality, supports consistent refrigeration performance, and contributes to easier maintenance and reliable day-to-day equipment operation.

Category:

Tag: #Kolpak #236001075

Description: The Star Mfg 2E-Z21560 Infinite Switch 15A 240V provides adjustable heat regulation for compatible commercial cooking equipment. This electrical control switch is designed to manage the power supplied to heating elements, allowing operators to adjust temperature levels according to cooking requirements. It works by cycling electrical current on and off at controlled intervals, helping maintain steady and responsive heat output during operation. Rated for 15A and 240V applications, it supports reliable performance in demanding kitchen environments. The Star Mfg Infinite Switch also helps improve temperature control, support efficient equipment operation, and simplify maintenance or replacement tasks in commercial foodservice settings.

Category:

Tag: #StarMfg #2E-Z21560

Description: The Star Mfg PS-RG5094 Range Infinite Switch Kit helps provide accurate and adjustable heat control for compatible commercial range equipment. This switch kit is designed to regulate the electrical flow to heating elements, allowing operators to control cooking temperatures more precisely during food preparation. It works by cycling power at variable intervals based on the selected heat setting, helping maintain consistent heating performance throughout operation. Suitable for routine commercial kitchen use, the kit supports dependable equipment functionality and responsive temperature adjustment. The Star Mfg PS-RG5094 Range Infinite Switch Kit also helps simplify maintenance and replacement tasks while contributing to efficient cooking control and reliable day-to-day range operation.

Category:

Tag: #StarMfg #PS-RG5094

Description: The Bally 000232 Refrigerator Latch Assembly W/ Lock Key & 13-1/2" Handle helps secure refrigerator doors while providing convenient access in commercial refrigeration applications. This latch assembly is designed to keep the door tightly closed to support consistent internal temperatures and efficient equipment operation. It works through a locking mechanism that engages securely with the door frame, while the included key adds controlled access when needed. The 13-1/2-inch handle offers a comfortable grip for smooth opening and closing during daily use.

Category:

Tag: #Bally #000232

Description: Glastender 06006207 Left Hinge Set & Brackets 180° Swing provides reliable door support and wide-opening access for compatible commercial refrigeration or bar equipment. This hinge set is designed to secure the door while allowing smooth movement through a full 180-degree swing range, helping improve accessibility during loading, cleaning, and routine operation. The included brackets help maintain proper alignment and stable door positioning for consistent performance over time. Built for commercial environments, it supports dependable door function while reducing strain on connected components. The Glastender 06006207 Left Hinge Set & Brackets 180° Swing also helps simplify maintenance, improve workspace convenience, and contribute to efficient daily equipment use.

Category:

Tag: #Glastender #06006207

Description: The TRUE 870865 Refrigerator Top Door Hinge Kit helps maintain smooth and stable door movement for compatible commercial refrigeration equipment. This hinge kit is designed to support the upper section of the refrigerator door, allowing it to open and close properly while maintaining correct alignment during daily operation. It works by securing the door in position and enabling controlled pivot movement to reduce strain on connected components. Built for routine commercial use, the kit assists in preserving door functionality and supporting efficient access to refrigerated storage. The TRUE 870865 Refrigerator Top Door Hinge Kit also helps simplify maintenance and replacement tasks while contributing to dependable refrigerator performance and consistent door operation.

Category:

Tag: #TRUE #870865

Description: Bally 000230 Refrigerator Reversible Hinge provides flexible door positioning support for compatible refrigeration equipment in commercial environments. This hinge is designed to allow refrigerator doors to open from either side, helping users adjust door orientation based on workspace layout and accessibility needs. It works by securely supporting the door while enabling smooth pivoting and controlled movement during opening and closing. Built for reliable daily operation, the hinge helps maintain proper door alignment and consistent functionality over time. The Bally 000230 Refrigerator Reversible Hinge also supports easier installation adjustments, improves convenience in tight workspaces, and contributes to efficient refrigerator operation and maintenance.

Category:

Tag: #Bally #000230

Description: The Hatco R02.30.044.00 Warmer Ceramic Single Lamp Holder is designed to provide secure and reliable support for heat lamp installation in compatible warming equipment. Featuring durable ceramic construction and 28" wire leads, it works by holding the lamp firmly in place while safely conducting electrical current to the heating element. The ceramic material helps withstand high operating temperatures, supporting dependable performance during continuous use. This component contributes to consistent heat lamp operation and proper food warming conditions. Built for commercial kitchen environments, it helps maintain stable functionality, simplifies replacement needs, and supports reliable day-to-day warmer performance.

Category:

Tag: #Hatco #02.16.120.00

Description: The Hatco R02.30.044.00 Warmer Ceramic Single Lamp Holder is designed to provide secure and reliable support for heat lamp installation in compatible warming equipment. Featuring durable ceramic construction and 28" wire leads, it works by holding the lamp firmly in place while safely conducting electrical current to the heating element. The ceramic material helps withstand high operating temperatures, supporting dependable performance during continuous use. This component contributes to consistent heat lamp operation and proper food warming conditions. Built for commercial kitchen environments, it helps maintain stable functionality, simplifies replacement needs, and supports reliable day-to-day warmer performance.

Category:

Tag: #Hatco #R02.30.044.00

Description: The Duke 153921 Oven Element Assembly is designed to provide reliable and even heat distribution for compatible commercial ovens. Measuring 23.5" x 15" x 9" and equipped with screw terminals for secure electrical connections, it works by converting electrical energy into heat through its internal resistance element. This generated heat circulates within the oven cavity to help maintain stable cooking temperatures and support consistent cooking performance. Built for dependable operation, the assembly contributes to efficient heat transfer and reduced temperature fluctuations during use. Its durable construction makes it a practical replacement component for maintaining smooth and consistent oven functionality in demanding kitchen environments.

Category:

Tag: #Duke #153921

Description: The Imperial 20143 Range Stainless Steel Kick Plate is designed to protect the lower front section of compatible IR-36 range equipment from debris, spills, and daily wear. Made from stainless steel, it works by covering the exposed base area, helping shield internal components while providing a clean and finished appearance. Its durable construction supports resistance to corrosion and routine kitchen impacts, making it suitable for demanding commercial environments. The kick plate also helps simplify cleaning around the equipment by reducing buildup beneath the range. Built for dependable use, it contributes to equipment protection, easier maintenance, and a more organized kitchen workspace.

Category:

Tag: #Imperial #20143

Description: The Kolpak 213751075 Refrigerator Hydraulic Flush Door Closer is designed to provide smooth and controlled door closing for compatible refrigeration units. Measuring 4-3/8" x 2-1/4", it works through a hydraulic mechanism that slows and guides the door as it closes, helping ensure a secure seal without slamming. This controlled motion supports proper temperature retention by reducing the chance of doors being left partially open. Built for dependable commercial use, it contributes to energy efficiency, consistent cooling performance, and reduced wear on door components. Its durable construction also helps maintain reliable door operation in busy foodservice environments.

Category:

Tag: #Kolpak #213751075

Description: The Frymaster 8262264 Fryer Interface Board is designed to manage communication and electrical control functions within compatible fryer systems. Operating with 120 VAC and 24 VAC inputs, it works by processing signals between various fryer components, helping coordinate functions such as temperature control, ignition, and operational monitoring. This electronic control helps ensure smooth system performance and accurate response during operation. Built for dependable commercial use, the interface board contributes to reliable equipment functionality, improved control efficiency, and consistent fryer performance. Its durable design supports stable operation and helps maintain proper communication between connected fryer components.

Category:

Tag: #Frymaster #8262264

Description: The Garland 1415301 Range Pilot Burner is designed to provide a steady ignition source for compatible commercial range equipment. Compatible with both natural gas and LP systems, it works by producing a controlled flame pattern through its 3/16" and 1/4" tube connections, allowing burners to ignite reliably during operation. This consistent pilot flame helps support stable heating performance and proper gas burner function. Built for dependable use in commercial kitchens, it contributes to efficient ignition, smoother equipment operation, and reliable daily performance. Its durable construction also helps maintain consistent flame stability under regular cooking conditions.

Category:

Tag: #Garland #1415301

Description: The Garland 1758701 Oven Top Grate provides a stable cooking surface that supports cookware placement and proper heat circulation during operation. It works by sitting securely over the burner or heating area, allowing heat to pass evenly through the grate openings while supporting pots and pans above the flame or heat source. This design helps maintain balanced cooking performance and steady positioning of cookware. Built for regular commercial kitchen use, the grate contributes to efficient heat distribution and dependable daily operation. Its durable construction also helps withstand high temperatures and frequent use in demanding cooking environments.

Category:

Tag: #Garland #1758701

Description: The Hoshizaki 428547-01 Pump Housing Gasket is designed to create a secure seal between pump housing components, helping prevent leaks during operation. It works by fitting tightly between connected surfaces to maintain proper pressure and contain water or fluid flow within the pump assembly. This sealing function supports efficient system performance and helps protect internal components from moisture-related issues. Built for dependable use in commercial equipment, the gasket contributes to smoother operation and reduced maintenance concerns. Its durable construction and precise fit make it a practical replacement part for maintaining reliable pump performance and overall equipment efficiency.

Category:

Tag: #Hoshizaki #428547-01

Description: The Cleveland 110830 Door Gasket is designed to create a reliable seal that helps maintain proper temperature and pressure inside compatible equipment. Made from gray silicone and measuring 15-1/2" x 20-1/4", it works by fitting securely around the door edge to reduce heat, steam, or air leakage during operation. The flexible silicone material allows consistent contact between the door and frame, supporting efficient sealing performance. Built for regular commercial use, it helps improve energy efficiency, maintain stable operating conditions, and reduce strain on the equipment. Its durable construction also supports dependable door sealing and long-term operational reliability.

Category:

Tag: #Cleveland #110830

Description: The Duke 153111 Hot Top Valve is designed to regulate gas flow for consistent heating performance in compatible hot top equipment. Equipped with 1/4" CCT pilot fittings, it works by controlling the amount of gas delivered to the burner system, allowing stable flame operation and accurate heat management. The valve’s design supports secure connections and dependable gas distribution during use. This helps maintain steady cooking temperatures while supporting safe and efficient equipment operation. Built for regular commercial kitchen applications, it contributes to reliable performance, smoother heat control, and consistent day-to-day functionality.

Category:

Tag: #Duke #153111

Description: The TRUE 201950 Refrigerator Magnetic Door Gasket is designed to provide a secure sealing solution that helps maintain consistent internal cooling temperatures. Measuring 21.5" x 31.25" with a 3/8" profile, it works by using an integrated magnetic strip to create a tight seal between the refrigerator door and cabinet when closed. This helps prevent cold air from escaping and reduces warm air infiltration, supporting efficient refrigeration performance. Built for regular commercial use, it contributes to energy efficiency, stable temperature control, and reduced strain on the cooling system. Its durable construction also supports reliable door closure and long-term operational consistency.

Category:

Tag: #TRUE #201950

Description: The TRUE 811135 Refrigerator Gasket is designed to create a dependable door seal that helps maintain consistent cooling performance in compatible refrigeration units. Measuring 25-1/6" x 53-5/8" D to D, it works by forming a tight seal around the door perimeter to reduce the escape of cold air and limit warm air infiltration. This helps support stable internal temperatures and efficient refrigeration operation. Built for regular commercial use, the gasket contributes to improved energy efficiency and reduced strain on the cooling system. Its durable construction also helps maintain proper door closure and supports reliable day-to-day refrigerator performance.

Category:

Tag: #TRUE #811135

Description: The Delfield 1702474 Refrigerator Door Gasket is designed to create a secure seal that helps maintain consistent internal cooling temperatures. Measuring 25-3/8" x 25-1/2", it works by fitting tightly around the refrigerator door edge to reduce air leaks when the door is closed. This helps prevent cold air from escaping and minimizes the entry of warm outside air, supporting efficient refrigeration performance. Built for regular commercial use, the gasket contributes to improved energy efficiency and more stable storage conditions. Its durable construction also helps reduce strain on the refrigeration system, supporting reliable day-to-day operation.

Category:

Tag: #Delfield #1702474

Description: The Hobart 00-291658 Meat Saw Filler Block is designed to provide stable support and proper spacing within compatible meat saw assemblies. It works by filling designated gaps around the cutting area, helping maintain alignment and creating a smoother surface for handling products during operation. This support helps improve control while reducing the chance of debris buildup in open spaces around the blade area. Built for dependable use in commercial food preparation environments, it contributes to cleaner operation and more consistent equipment performance. Its durable construction makes it a practical replacement part for maintaining the efficiency and functionality of meat saw equipment.

Category:

Tag: #Hobart #00-291658

Description: The Pitco 60119001 Flex Tube Kit provides a secure and flexible connection solution for gas and pilot lines in compatible equipment. Featuring a 1/4" x 18" flex tube, compression nuts, and a male breakaway fitting, the kit is designed to allow safe gas flow while accommodating movement or alignment adjustments during installation. It works by creating tight, reliable connections between gas system components, helping maintain proper fuel delivery to burners and pilot assemblies. The included fittings support straightforward installation and dependable sealing. Built for regular commercial use, this kit helps improve connection stability, support safe operation, and simplify maintenance or replacement tasks.

Category:

Tag: #Pitco #60119001

Description: The Turbo Air 3963339900 Refrigerator Evaporator Fan Motor is designed to circulate air efficiently within compatible refrigeration units, helping maintain consistent cooling performance. Operating at 120V, it works by powering the evaporator fan assembly to move cold air evenly throughout the cabinet, reducing temperature fluctuations and supporting proper airflow. This motor is supplied without a fan blade, allowing compatibility with existing blade assemblies when applicable. Built for reliable operation, it helps improve cooling consistency, supports energy efficiency, and contributes to maintaining proper storage conditions for refrigerated products in commercial environments.

Category:

Tag: #TurboAir #3963339900

Description: The Lincoln 369419 Oven Heating Element provides consistent and efficient heat output to support reliable oven performance. Operating at 240V with a 5600W rating, it works by converting electrical energy into heat through its internal resistance coil, distributing warmth evenly within the oven cavity. This helps maintain stable cooking temperatures and supports uniform results across different food items. Designed for dependable use, it contributes to efficient energy utilization and steady operation. Its straightforward function makes it a practical replacement component for maintaining consistent heating and supporting overall oven efficiency in commercial kitchen environments.

Category:

Tag: #Lincoln #369419

Description: The Garland 1008897 Oven Infrared Burner Box is designed to deliver consistent, high-intensity heat for efficient cooking performance. Measuring 19" x 5", it works by using gas to heat the internal ceramic components, which then emit infrared energy to distribute heat evenly across the cooking surface. This method supports quick heat-up times and uniform temperature coverage. The integrated ceramic design helps retain and radiate heat effectively, contributing to steady operation. Built for reliable use, it supports improved cooking consistency, efficient heat transfer, and dependable performance in commercial oven applications.

Category:

Tag: #Southbend #1008897

Description: The Southbend 33414 Range Signal Light provides a clear visual indicator of equipment operation, helping users quickly confirm power or heating status. Designed for 250V systems, it works by illuminating an amber light when the circuit is active, signaling that the range or component is in use. The 1/2" hole fit allows for proper panel mounting, while the 3/16" tab terminals support secure electrical connections. This simple function enhances operational awareness and helps reduce guesswork during use. Built for reliable performance, it contributes to safer operation and more efficient workflow in commercial kitchen environments.

Category:

Tag: #Southbend #33414

Description: The Vulcan Hart 00-428045-00001 oven solenoid valve ensures reliable gas flow control for safe and efficient oven operation. This component is designed to regulate the flow of gas within commercial ovens by opening and closing in response to electrical signals from the control system. When energized, the valve allows gas to pass through to the burner; when de-energized, it shuts off the supply to prevent leaks or unsafe conditions. Its consistent performance supports proper heating and temperature stability. Built for compatibility and durability, it helps maintain operational safety, reduces downtime, and contributes to the overall efficiency of commercial kitchen equipment.

Category:

Tag: #VulcanHart #00-428045-00001

Description: The Duke 212933 Element is designed to provide steady and reliable heat output for compatible commercial equipment. Operating at 208V with a 750W rating, it works by converting electrical energy into heat through its internal resistance coil, delivering consistent thermal performance during operation. This controlled heat generation helps maintain proper cooking or warming temperatures as required. Built for dependable use, it supports efficient energy utilization and stable operation. Its straightforward design makes it a practical replacement component for maintaining consistent heating performance and helping ensure smooth day-to-day equipment functionality.

Category:

Tag: #Duke #212933

Description: The Garland 2195000 Range Surface Element is designed to deliver consistent and reliable heat for everyday cooking applications. Featuring an 8-inch diameter and operating at 2100W with 208V power, it works by converting electrical energy into heat through its internal coil, which then transfers heat evenly to cookware. The screw terminal connections allow for secure installation and stable electrical contact. This design helps maintain uniform heating performance while supporting efficient energy use. Built for dependable operation, it provides a practical solution for maintaining consistent cooking temperatures and supporting smooth performance in commercial kitchen environments.

Category:

Tag: #Garland #2195000

Description: The Garland 1010300 Oven Thermostat Assembly provides precise temperature control to support consistent cooking results in compatible ovens. It works by using a sensing bulb that detects internal oven temperature and signals the thermostat to adjust gas flow accordingly. The included pilot light, dial, and bezel allow for clear monitoring and easy temperature adjustment during operation. This coordinated system helps maintain stable heat levels and prevents temperature fluctuations. Built for dependable performance, it supports efficient oven operation, improves cooking consistency, and offers a practical solution for maintaining reliable temperature regulation in commercial kitchen environments.

Category:

Tag: #Garland #1010300

Description: The Jackson 6401-003-80-83 Universal Fused Timer Kit is designed to control cycle timing and protect electrical components in compatible equipment. It works by regulating the duration of operational cycles through an integrated timing mechanism, while the built-in fuse helps guard against electrical overloads. The included bracket supports secure and straightforward installation within the unit. This combination allows for consistent operation and added protection during use. Built for practical performance, it helps maintain reliable cycle control, reduce the risk of electrical issues, and support overall equipment efficiency in commercial settings.

Category:

Tag: #Jackson #6401-003-80-83

Description: The Hobart 819147 Dishwasher Flame Switch is designed to monitor burner flame presence and support safe dishwasher operation. It works by detecting whether a flame is active and sending a signal to the control system to allow or stop gas flow accordingly. If the flame is not detected, the switch helps shut off the gas supply to prevent unsafe conditions. This function supports consistent heating performance while enhancing operational safety. Built for reliable use in commercial dishwashing equipment, it helps maintain proper system function, reduce risk, and ensure dependable performance during daily operation.

Category:

Tag: #Hobart #819147

Description: The Manitowoc 8369049 Ice Machine Float Valve Assembly is designed to regulate water levels for consistent and efficient ice production. It works by using a float mechanism that rises and falls with the water level, automatically opening or closing the valve to control incoming water flow. The integrated shut-off feature allows for manual control when needed, while the built-in strainer helps filter out debris before it enters the system. This combination supports reliable operation and helps protect internal components. Its practical design helps maintain proper water levels, improve system efficiency, and reduce the likelihood of maintenance issues over time.

Category:

Tag: #Manitowoc #8369049

Description: The TRUE 875587 Refrigerator Door Spring Kit is designed to support smooth door movement and ensure reliable self-closing performance in compatible refrigeration units. Measuring 52-3/8 inches, the spring mechanism works by applying controlled tension that assists the door in returning to a closed position after opening. This helps maintain proper internal temperatures by reducing the chance of doors being left ajar. Built for consistent use, it supports efficient operation and helps minimize energy loss. Its durable construction makes it a practical replacement part for maintaining dependable door function and overall refrigeration performance in commercial settings.

Category:

Tag: #TRUE #875587

Description: The Jade Range 4418500200 Horizontal Split Valve ensures controlled and reliable gas flow in commercial cooking equipment. This component is designed to regulate and split gas supply between connected lines, featuring a 1/8" MPT inlet and a 3/8"-27 outlet for secure compatibility. It operates by directing gas through its internal passage, allowing consistent distribution while maintaining proper pressure. Built for durability in demanding kitchen environments, it helps support safe and efficient appliance performance. Its precise fit and straightforward installation reduce downtime during maintenance, making it a practical solution for maintaining steady operation and ensuring dependable gas control in professional setups.

Category:

Tag: #JadeRange #4418500200

Description: The Middleby Marshall 58500 Oven Motor is a reliable component designed to ensure consistent rotation within compatible commercial ovens. Operating at 9.3 RPM with a 115VDC power supply and low 0.15A draw, it drives internal mechanisms such as conveyor belts or fans to maintain even heat distribution and cooking performance. This motor works by converting electrical energy into controlled mechanical motion, supporting smooth and continuous oven operation. Its steady speed helps achieve uniform cooking results, while the efficient power usage contributes to reduced energy consumption. Built for durability and dependable performance, it supports routine kitchen operations with minimal maintenance requirements.

Category:

Tag: #MiddlebyMarshall #58500

Description: The Middleby Marshall 64106 Oven Bearing/Roll Pin Assembly supports smooth movement and alignment of internal oven components, helping maintain consistent operation. It works by providing a stable pivot point and secure fastening through the bearing and roll pin, allowing parts to rotate or stay in position as designed. This helps reduce friction and wear during regular use. Built for durability in high-temperature environments, it contributes to reliable mechanical performance. By supporting proper alignment and minimizing component strain, it helps extend equipment longevity and maintain efficient oven operation in commercial kitchen settings.

Category:

Tag: #MiddlebyMarshall #64106

Description: The Pitco 60138701 Fryer Drain Valve provides controlled oil drainage, helping simplify fryer maintenance and cleaning. Designed with a 1-1/4" NPT connection, it installs securely to allow safe and efficient release of used oil from the fryer tank. The valve operates by opening and closing a passage that directs oil flow when needed, giving operators better control during draining. Its sturdy construction supports regular use in demanding kitchen environments. By enabling smoother oil removal and reducing the risk of spills, it helps maintain cleaner equipment, improve workflow efficiency, and support overall safety during routine fryer maintenance.

Category:

Tag: #Pitco #60138701

Description: The Frymaster 8101569 1/4 Ton Expansion Valve is designed to regulate refrigerant flow for efficient temperature control in compatible cooling systems. It works by adjusting the amount of refrigerant entering the evaporator based on system pressure and temperature conditions, helping maintain proper cooling balance. This controlled flow supports consistent performance and prevents issues such as overfeeding or underfeeding the system. Built for dependable operation, it helps improve energy efficiency and system stability while reducing unnecessary strain on components. Its precise regulation makes it a practical replacement part for maintaining reliable and efficient refrigeration performance.

Category:

Tag: #Frymaster #8101569

Description: The Southbend 1182580 Griddle Thermocouple is designed to monitor heat and support safe operation in compatible 1970 Series griddles. It works by generating a small millivolt signal when heated by the pilot flame, which signals the gas valve to remain open; if the flame goes out, the signal stops and the gas supply is shut off. The 24-inch length allows for proper positioning within the unit for accurate temperature sensing. Built for consistent performance, it helps enhance operational safety and reliability while supporting efficient griddle function in commercial kitchen environments.

Category:

Tag: #Southbend #1182580

Description: The Royal Range 3109 Fryer Thermopile is designed to generate the electrical current needed to power the gas control system in commercial fryers. It works by converting heat from the pilot flame into millivoltage energy, which then signals the gas valve to remain open during operation. This process supports consistent burner performance without requiring an external power source. Built for reliable use, it helps maintain safe operation by ensuring gas flow is only sustained when a flame is present. Its durable construction and straightforward function make it a practical component for supporting efficient and dependable fryer performance.

Category:

Tag: #ROYALRANGE #3109

Description: The Roundup - AJ Antunes 7000619 Warmer Thermostat is designed to regulate and maintain consistent warming temperatures up to 340°F in compatible equipment. It works by sensing internal heat levels and automatically cycling the heating element on or off to keep temperatures within the desired range. This helps prevent overheating or insufficient warming during operation. Built for dependable performance, it supports steady food holding conditions and contributes to energy efficiency by avoiding unnecessary heat fluctuations. Its straightforward functionality makes it a practical replacement part for maintaining reliable operation and consistent temperature control in commercial warming units.

Category:

Tag: #RoundupAJAntunes #7000619

Description: The Manitowoc 8252109 Ice Machine Water Pump is designed to circulate water efficiently within compatible ice machines, supporting consistent ice production. Operating at 230V with a 50/60Hz frequency and 0.21A draw, it moves water through the system to ensure even distribution over the evaporator surface, which is essential for proper ice formation. The included O-ring helps create a secure seal, reducing the risk of leaks during operation. Built for reliable performance, this pump supports smooth system function and helps maintain efficiency, making it a practical replacement part for keeping ice machines operating as intended.

Category:

Tag: #Manitowoc #8252109

Description: The Heatcraft 37000701 Fan Guard provides a protective barrier that helps prevent accidental contact with moving fan blades while maintaining proper airflow. Designed for 12-inch fan assemblies, this plastic guard fits securely over the fan area, allowing air to circulate freely while reducing the risk of damage or injury. Its durable plastic construction supports regular use in refrigeration or HVAC environments and resists wear from typical operating conditions. By helping keep debris away from the fan and supporting safer operation, it contributes to maintaining system efficiency and reducing potential maintenance concerns over time.

Category:

Tag: #Heatcraft #37000701

Description: The Hobart 714268 Thermocouple is a temperature-sensing component designed to help ensure safe and reliable operation in compatible 1980 Series equipment. It works by generating a small electrical voltage (20–30 mV) when exposed to heat, which signals the system to maintain or shut off the gas supply as needed. The 18-inch length allows for proper placement within the unit, supporting accurate temperature detection. Built for consistent performance, it helps maintain operational safety by preventing gas flow when no flame is present. Its straightforward function and durable design make it a practical replacement part for maintaining equipment efficiency and reliability.

Category:

Tag: #Hobart #714268

Description: The Hobart 295174 Mixer Dough Hook Spiral is designed to efficiently knead dough in 60-quart mixer bowls, helping achieve consistent texture with minimal effort. This component attaches securely to compatible mixers and uses a spiral shape to move dough in a smooth, continuous motion, ensuring even mixing and proper gluten development. Its durable construction supports regular use in commercial kitchens, while the design helps reduce strain on the mixer during heavy dough preparation. By improving mixing efficiency and consistency, it supports better dough quality and can help streamline kitchen operations, making it a practical addition for bakeries and foodservice environments.

Category:

Tag: #Hobart #295174 #MixerDoughHookSpiralforBowls

Description: The Hobart 00-893052 Dishwasher Rinse Arm Shaft supports proper rotation for effective rinsing performance in commercial dishwashers. This component connects to the rinse arm and allows it to spin smoothly during operation, distributing water evenly across dishes. It works by providing a stable for rotation, ensuring consistent movement and water coverage throughout the rinse cycle. Its durable construction is designed to withstand frequent use in demanding environments. By enabling even water distribution, it helps improve cleaning results, supports efficient operation, and serves as a practical replacement part for maintaining reliable dishwasher performance.

Category:

Tag: #Hobart #295174

Description: The Hobart 913153 Thermostat RX provides accurate temperature control for consistent equipment performance. Designed with a 3/8" x 6" sensing probe and operating within a 200–400°F range at 24V, this thermostat works by monitoring temperature and opening or closing the control circuit to maintain the set level. Its responsive design helps regulate heat effectively during operation. Suitable for commercial kitchen equipment, it supports stable cooking conditions and reduces the risk of overheating or temperature fluctuations. Built for reliability, it serves as a practical replacement part that helps maintain efficient and dependable day-to-day performance.

Category:

Tag: #Hobart #913153 #Thermostat

Description: The Component Hardware Group R50-2850 Hinge provides smooth and stable door movement for reliable equipment operation. This component is designed to connect and support a door, allowing it to open and close through a controlled pivoting motion. It works by securing the door to the frame while maintaining proper alignment during repeated use. Its durable construction is suited for demanding commercial environments. By ensuring consistent door function, it helps maintain proper sealing, supports efficient operation, and reduces wear on surrounding components, making it a practical replacement part for everyday maintenance.

Category:

Tag: #ComponentHardwareGroup #R50-2850

Description: The Component Hardware Group LED-40000W-B Exhaust Hood LED Bulb provides energy-efficient illumination for commercial kitchen hood systems. This LED bulb works by converting electrical energy into bright, consistent light while generating less heat compared to traditional lighting options. It is designed to fit compatible exhaust hoods, helping improve visibility in cooking and prep areas. Its durable construction supports reliable performance in demanding environments. By offering long service longevity and reduced energy consumption, it helps lower maintenance needs and operating costs while maintaining clear and consistent lighting for daily kitchen operations.

Category:

Tag: #ComponentHardwareGroup #LED-40000W-B

Description: The Roundup - AJ Antunes 7001933 Control Board provides dependable electronic management for consistent equipment operation. This component functions as the central control unit, receiving input signals and directing connected systems such as heating, timing, or motor functions based on programmed settings. It works by processing electrical commands and coordinating responses to maintain smooth performance. Its design supports accurate operation in commercial foodservice environments where reliability is important. By helping regulate multiple functions efficiently, it contributes to improved equipment consistency, reduced manual intervention, and practical maintenance when replacing a faulty board.

Category:

Tag: #Roundup - AJ Antunes #7001933

Description: The Roundup - AJ Antunes 7001580 Display Cabinet Switch Kit provides reliable control for operating display cabinet electrical functions. This kit is designed to replace worn or damaged switch components, allowing users to turn connected features such as lighting or heating systems on and off with ease. It works by opening or closing the electrical circuit through a simple switch action, helping maintain smooth equipment operation. Its complete kit design supports straightforward installation and maintenance. Built for commercial environments, it helps improve convenience, restore proper functionality, and reduce downtime during regular service.

Category:

Tag: #Roundup - AJ Antunes #7001580

Description: The TRUE 800366 Refrigerator Temperature Control provides dependable temperature regulation for consistent refrigeration performance. This component works by sensing internal cabinet temperature and cycling the cooling system on or off as needed to maintain the selected setting. The included dial allows users to adjust temperature levels easily for different storage requirements. Its responsive design helps reduce temperature fluctuations and supports proper cooling conditions for stored products. Built for regular commercial use, it serves as a practical replacement part that contributes to energy efficiency, reliable operation, and stable day-to-day food storage performance.

Category:

Tag: #TRUE #800366

Description: The TRUE 800320 Refrigerator Temperature Range Control provides accurate cooling regulation for consistent food storage performance. Designed with a slot stem, knob, and 24.5" capillary tube, this component senses cabinet temperature and cycles the refrigeration system on or off to maintain settings between 16.5° and 44.5°F. It works by responding to temperature changes and adjusting compressor operation as needed. The included knob allows simple manual temperature adjustments for user convenience. Built for dependable commercial use, it helps reduce temperature fluctuations, improve energy efficiency, and support reliable refrigeration performance during daily operation.

Category:

Tag: #TRUE #800320

Description: The TRUE 203542 Door Gasket helps maintain a secure door seal for reliable refrigeration performance and energy efficiency. Measuring 25-1/2" x 53-3/16", this gasket fits around the door edge and compresses against the cabinet frame when closed to reduce air leaks. It works by keeping cold air inside while limiting warm air from entering the unit. This supports stable internal temperatures and helps the refrigeration system operate more efficiently. Built for regular commercial use, it serves as a practical replacement part that contributes to better food storage conditions, reduced energy use, and dependable day-to-day operation.

Category:

Tag: #TRUE #203542

Description: The Garland 4529434 Range Ignition Module provides reliable burner startup for safe and efficient range operation. Designed for natural or LP gas systems, this 24V electronic component works by generating a controlled spark to ignite the burner when heat is requested. It also helps monitor the ignition sequence to ensure proper flame establishment before continued gas flow. Its responsive design supports dependable performance in commercial kitchen environments. By reducing ignition delays and helping prevent failed startups, it contributes to safer operation, consistent heating performance, and smooth day-to-day equipment functionality.

Category:

Tag: #Garland #4529434

Description: The Garland 222024 Range Cast Iron Radiant provides steady heat distribution for reliable cooking performance in commercial ranges. Measuring 19-1/2" x 3-1/2" wide x 2" high, this component is positioned above the burner to absorb direct flame heat and radiate it evenly across the cooking surface. Its cast iron construction retains heat well, helping maintain stable temperatures during operation. This design supports consistent cooking results while reducing hot spots and uneven heating. Built for durability under high-temperature use, it serves as a practical replacement part that contributes to efficient heat transfer and dependable day-to-day range performance.

Category:

Tag: #Garland #222024

Description: The Garland CK11000301070 Convection Oven Digital Timer provides precise time control for consistent and efficient cooking operations. Designed for 115V systems, this complete timer assembly works by electronically counting down selected cooking durations and signaling when the cycle is finished. It helps coordinate cooking times accurately, reducing the need for constant manual monitoring. The digital interface supports clear settings and easy operation in busy kitchen environments. By improving timing accuracy, it helps prevent overcooking or undercooking, supports consistent food quality, and serves as a practical replacement part for maintaining reliable oven performance.

Category:

Tag: #Garland #CK11000301070

Description: The Garland GL1686701 Convection Oven Blower Motor delivers dependable airflow for consistent and efficient oven performance. Operating on 115V single-phase power, this 2-speed motor runs at 1725 or 1140 RPM to adjust airflow based on cooking requirements. It works by converting electrical energy into mechanical motion, driving the blower fan to circulate heated air evenly throughout the oven cavity. This supports uniform temperatures and helps reduce hot spots during operation. Built for regular commercial use, it offers reliable performance while its dual-speed capability contributes to flexible heat control, improved cooking consistency, and efficient day-to-day operation.

Category:

Tag: #Garland #GL1686701

Description: The Electrolux 0C1889 Convection Oven Door Gasket helps maintain proper heat retention for efficient and consistent oven performance. Measuring 1438mm x 630mm, this gasket is designed to create a tight seal around the oven door when closed, reducing heat loss and preventing hot air from escaping. It works by compressing against the door frame to support stable internal temperatures during cooking. Its durable construction is suited for regular commercial use and repeated opening and closing cycles. By improving temperature consistency, it helps enhance cooking results, reduce energy waste, and support reliable day-to-day oven operation.

Category:

Tag: #Electrolux #0C1889

Description: The Pitco B4512702 Fryer Large Pasta Fine Basket provides efficient handling and cooking of pasta or small food items in commercial fryers. Measuring 16-1/4" x 13-1/2" x 10", this basket features a fine mesh design that securely holds smaller products while allowing hot water or oil to circulate evenly. It works by submerging food for cooking and lifting it out quickly for draining when finished. Its sturdy construction supports regular use in busy kitchen environments. By promoting even cooking, easy product handling, and faster workflow, it helps improve consistency and efficiency during daily food preparation.

Category:

Tag: #Pitco #B4512702

Description: The Pitco 60124501 Fryer Thermostat provides accurate temperature control for consistent and efficient frying performance. This component uses a 3/8" x 5" sensing bulb with a 36" capillary tube to monitor oil temperature and regulate the heating cycle accordingly. It works by opening or closing the control circuit to maintain the selected heat level, helping prevent overheating or temperature drops. Its responsive design supports steady cooking conditions and reliable fryer operation. Built for commercial kitchen use, it contributes to improved food quality, energy efficiency, and reduced equipment strain during daily service.

Category:

Tag: #Pitco #60124501

Description: The Pitco PTPP10613 Fryer Filter Envelopes help maintain cleaner oil for consistent frying performance and efficient kitchen operation. Measuring 18-1/2" x 20-1/2", these filter envelopes are designed to fit compatible fryer filtration systems and capture food particles, crumbs, and sediment as oil passes through. This process helps extend the usable longevity of cooking oil and supports better food quality. Supplied in a convenient 100-pack, they are suitable for regular commercial use. By promoting cleaner oil and smoother filtration cycles, they help reduce waste, improve fryer efficiency, and support dependable day-to-day performance.

Category:

Tag: #Pitco #PTPP10613

Description: The Duke 176901 Oven IR Burner delivers efficient radiant heat for consistent oven cooking performance. This infrared burner works by igniting gas and heating the burner surface, which then emits intense radiant energy to transfer heat quickly and evenly to the cooking chamber. Its design supports fast heat response and steady temperature output during operation. Built for commercial kitchen environments, it provides reliable performance under regular use. By promoting uniform heating and efficient energy transfer, it helps improve cooking consistency, reduce recovery time, and maintain dependable oven functionality during daily service.

Category:

Tag: #Duke #176901

Description: The Imperial 40498-120 IRC Motor Assembly provides dependable mechanical power for smooth and efficient equipment operation. Designed for 120V systems, this motor assembly works by converting electrical energy into rotational motion to drive compatible internal components such as fans, conveyors, or other moving parts. Its assembled design helps simplify installation and replacement, reducing service time during maintenance. Built for regular commercial use, it supports consistent performance in demanding kitchen environments. By delivering reliable motion and steady operation, it helps maintain equipment efficiency, minimize downtime, and support dependable day-to-day functionality.

Category:

Tag: #Imperial #40498-120

Description: The Bunn 39285.1001 Dispensing Valve Kit provides controlled and reliable liquid dispensing for beverage equipment. Operating on 60Hz, 120VAC/120V power, this valve kit works by opening and closing the flow path when activated, allowing accurate dispensing of water or beverage products as needed. The included O-ring helps create a secure seal to reduce leaks and support smooth operation. Its design promotes consistent portion control and dependable performance in commercial environments. Easy to install as a replacement component, it helps maintain equipment efficiency, minimize waste, and support uninterrupted daily service.

Category:

Tag: #Bunn #39285.1001

Description: The Frymaster 8074978 V/F Dual Transformer provides dependable voltage conversion for safe and efficient fryer operation. This electrical component accepts 100/120V input and converts it to 12/24V output to power compatible low-voltage controls and internal systems. It works through insulated windings that transfer electrical energy while adjusting voltage to the required level. Its dual-output design supports multiple circuit needs within the equipment. By supplying stable power, it helps maintain consistent performance, protects sensitive components from improper voltage, and supports reliable day-to-day operation, making it a practical replacement part for commercial kitchen equipment.

Category:

Tag: #Frymaster #8074978

Description: The Amana 59001626 Transformer provides stable voltage conversion for reliable equipment operation. Designed for 60Hz systems with 208/230V input, this electrical component works by transferring energy between internal windings to step voltage up or down as required by connected circuits. It helps supply the proper power needed for controls and other internal components to function correctly. Its dependable performance supports consistent operation and helps protect equipment from issues caused by incorrect voltage levels. Built for commercial use, it serves as a practical replacement part that contributes to efficient performance, reduced electrical stress, and smoother day-to-day functionality.

Category:

Tag: #Amana #59001626

Description: The Lincoln 369432 Light Rocker Switch provides dependable power control for lighting and electrical functions in commercial equipment. Rated for 15A at 277V, this switch operates through a simple rocker action that opens or closes the electrical circuit when pressed. It features four 1/4" terminals for secure wiring connections and a green illuminated design for easy visibility during operation. Its durable construction supports frequent use in demanding environments. By allowing quick and reliable control of connected components, it helps improve convenience, supports efficient operation, and serves as a practical replacement part for maintaining equipment functionality.

Category:

Tag: #Lincoln #369432

Description: The Blodgett 16002 Oven Swivel Stem Caster provides smooth mobility for easier movement and positioning of commercial ovens. Featuring a 5" outside diameter wheel, this caster works by rotating on a swivel stem that allows the equipment to turn and maneuver in multiple directions with less effort. Its sturdy construction supports the weight of compatible units while enabling controlled movement during cleaning, maintenance, or kitchen reconfiguration. The gray wheel material helps promote stable rolling performance on various floor surfaces. Designed for regular commercial use, it contributes to convenience, efficient workspace management, and safer equipment handling.

Category:

Tag: #Blodgett #16002

Description: The Nor-Lake 118638 Plastic Mounting Slot Door Seal helps maintain proper temperature control by reducing air leakage in refrigeration units. This component features vinyl blades that create a flexible barrier, sealing gaps when the door is closed while allowing smooth passage when opened. Measuring 1-7/8" x 28-1/2", it fits into a mounting slot for secure installation and consistent positioning. Its design supports efficient insulation by limiting the escape of cold air and preventing warm air from entering. Built for regular commercial use, it contributes to improved energy efficiency, stable internal temperatures, and reduced strain on refrigeration systems.

Category:

Tag: #Nor-Lake #118638

Description: The Imperial 20161 26-1/2" Oven Door Closing Mechanism ensures secure and consistent door closure for reliable oven operation. This component works by guiding and controlling the movement of the oven door, allowing it to close firmly and align properly with the frame. Its design helps maintain a tight seal, reducing heat loss during cooking. Measuring 27-3/8" x 14-1/2", it is built to fit compatible units and withstand regular use in commercial environments. By supporting proper door function, it contributes to energy efficiency, consistent cooking temperatures, and improved overall equipment performance.

Category:

Tag: #Imperial #20161

Description: The Blodgett 36376 On/Off Gas Switch provides simple and reliable control over gas flow for safe equipment operation. This component works by opening or closing the gas supply circuit through a manual switching action, allowing users to turn the gas flow on or off as needed. Its straightforward design supports quick response and ease of use during daily operation. Built for durability, it performs consistently in commercial kitchen environments with frequent use. By enabling controlled gas management, it helps improve safety, reduce the risk of leaks, and maintain dependable equipment functionality.

Category:

Tag: #Blodgett #36376

Description: The Southbend 1182835 Range Tubular Steel Burner delivers consistent heat output for reliable cooking performance. This 22-1/2" burner works by mixing gas with air inside the tube, where the adjustable air shutter allows control over the air-to-gas ratio for efficient combustion. Once ignited, it produces an even flame along its length to distribute heat across the cooking surface. Its tubular steel construction supports durability under high-temperature conditions. By promoting proper combustion and steady heat distribution, it helps improve cooking consistency, supports energy efficiency, and serves as a practical replacement part for maintaining dependable range operation.

Category:

Tag: #Southbend #1182835

Description: The Vulcan Hart 407522-7 Oven FDO Thermostat provides accurate temperature control for consistent cooking performance. This component operates within a 200–550°F range and uses a 54" capillary tube to sense internal oven temperature and regulate heat output accordingly. It works by opening or closing the control circuit to maintain the set temperature, ensuring stable cooking conditions. Its responsive design supports even heat distribution and helps prevent overheating or temperature fluctuations. Built for commercial kitchen use, it offers reliable performance while contributing to improved energy efficiency and consistent cooking results.

Category:

Tag: #VulcanHart #407522-7

Description: The Waring/Qualheim 503357 Blender Immersion Coupling Kit ensures efficient power transfer for smooth and consistent blending performance. This kit is designed to connect the motor to the blending shaft, allowing rotational force to be transmitted effectively during operation. It works by securely linking moving components so the blade can rotate at the required speed for proper mixing or pureeing. Its construction supports reliable use in demanding kitchen environments. By maintaining proper alignment and reducing wear between parts, it helps extend equipment life, improve blending consistency, and minimize interruptions during regular use.

Category:

Tag: #Waring/Qualheim #503357

Description: The Henny Penny 19501 Fryer Basket with Hooks provides a sturdy and efficient way to handle food during frying operations. Measuring 13-3/4" x 10-1/2" x 8-1/2", this basket is designed to hold food securely while allowing oil to circulate evenly for consistent cooking. It works by submerging items in hot oil and then easily lifting them out, with integrated hooks enabling convenient draining and positioning on the fryer. Its durable construction supports frequent use in commercial kitchens. By promoting even frying and easy handling, it helps improve workflow, reduce mess, and maintain consistent cooking results.

Category:

Tag: #HennyPenny #19501

Description: The Manitowoc 3005939 Ice Machine Air Filter helps maintain proper airflow and supports efficient ice machine performance. This filter works by trapping dust, dirt, and airborne particles as air is drawn into the system, preventing buildup on internal components. By keeping the airflow clean, it helps ensure consistent cooling and reliable operation. Its design allows for easy removal and replacement during routine maintenance. Suitable for commercial environments, it contributes to improved equipment efficiency, reduced wear on components, and more consistent ice production while helping minimize potential service interruptions.

Category:

Tag: #Manitowoc #3005939

Description: The Manitowoc 7629143 Ice Machine Air Filter Assembly helps maintain clean airflow for efficient and reliable ice machine operation. This component works by capturing dust, debris, and airborne particles as air passes through the filter, preventing contaminants from entering internal components. By ensuring proper airflow, it supports consistent cooling performance and helps protect the system from buildup that can affect efficiency. Its design allows for easy installation and replacement during routine maintenance. Suitable for commercial environments, it contributes to improved equipment longevity, reduced maintenance issues, and steady day-to-day performance.

Category:

Tag: #Manitowoc #7629143

Description: The Southbend 1195303 Thermostat Knob 600° provides precise temperature control for efficient cooking operations. This knob is designed to fit onto a compatible thermostat shaft, allowing users to adjust heat settings through a simple turning motion up to 600°. It works by translating manual input into accurate temperature changes within the equipment. Its clear markings help improve setting visibility and consistency during use. Built for durability in commercial kitchen environments, it supports reliable performance under frequent handling. Easy to install and replace, it helps maintain proper temperature regulation and contributes to consistent cooking results.

Category:

Tag: #Southbend #1195303

Description: The Blodgett 41093 Oven Ignition Module ensures reliable burner ignition for consistent oven performance. This electronic component works by generating a spark to ignite the gas burner and monitoring the flame to confirm proper ignition before allowing continuous gas flow. It communicates with the oven’s control system to manage safe startup and operation. Designed for dependable use in commercial kitchen environments, it supports steady and efficient performance. By helping prevent ignition failures and ensuring proper burner function, it contributes to improved safety, reduced downtime, and consistent cooking conditions during daily operation.

Category:

Tag: #Blodgett #41093

Description: The Frymaster 8260981 Fryer Natural Igniter with Gasket ensures dependable ignition for consistent fryer operation. This component works by generating a controlled spark to ignite the gas burner, initiating the heating process when the fryer is activated. The included gasket helps provide a secure seal during installation, supporting proper alignment and reducing the risk of gas leakage. Its design allows for reliable performance in demanding kitchen environments. By enabling quick and consistent ignition, it helps maintain efficient operation, improves safety, and minimizes delays, making it a practical replacement part for maintaining smooth fryer functionality.

Category:

Tag: #Frymaster #8260981

Description: The Middleby Marshall 27170-0070 Oven Blower Wheel ensures efficient air circulation for consistent oven performance. This component is designed to attach to the motor shaft using two set screws, rotating counterclockwise to move air evenly throughout the oven cavity. With a 5/8" center hole and 9-1/8" diameter, it supports proper airflow distribution during operation. By circulating heated air effectively, it helps maintain uniform temperatures and reduces hot spots. Built for durability in commercial environments, it contributes to consistent cooking results, improved efficiency, and reliable day-to-day oven functionality.

Category:

Tag: #MiddlebyMarshall #27170-0070

Description: The Bakers Pride AS-M2138A Oven Gas Ignition Control Module ensures reliable and controlled ignition for consistent oven operation. This component works by generating a spark to ignite the gas burner and monitoring the flame to confirm successful ignition before allowing continued gas flow. It coordinates with the oven’s control system to manage safe startup and operation. Its design supports dependable performance in commercial kitchen environments where consistency is important. By helping prevent ignition failures and ensuring proper burner function, it contributes to safer operation, improved efficiency, and reduced downtime during regular use.

Category:

Tag: #MiddlebyMarshall #27170-0070

Description: The Bakers Pride AS-M2138A Oven Gas Ignition Control Module ensures reliable and controlled ignition for consistent oven operation. This component works by generating a spark to ignite the gas burner and monitoring the flame to confirm successful ignition before allowing continued gas flow. It coordinates with the oven’s control system to manage safe startup and operation. Its design supports dependable performance in commercial kitchen environments where consistency is important. By helping prevent ignition failures and ensuring proper burner function, it contributes to safer operation, improved efficiency, and reduced downtime during regular use.

Category:

Tag: #BakersPride #AS-M2138A

Description: The Imperial 36329 Knob provides simple and reliable control for adjusting equipment settings in commercial kitchens. This component is designed to fit onto a compatible control shaft, allowing users to regulate functions such as temperature or gas flow through a smooth turning motion. Its straightforward design supports precise adjustments during operation, helping maintain consistent performance. Built for durability, it withstands frequent handling in busy environments. Easy to install and replace, it serves as a practical part that helps ensure safe operation, improves user control, and supports efficient day-to-day equipment use. The Imperial 36329 Knob provides simple and reliable control for adjusting equipment settings in commercial kitchens. This component is designed to fit onto a compatible control shaft, allowing users to regulate functions such as temperature or gas flow through a smooth turning motion. Its straightforward design supports precise adjustments during operation, helping maintain consistent performance. Built for durability, it withstands frequent handling in busy environments. Easy to install and replace, it serves as a practical part that helps ensure safe operation, improves user control, and supports efficient day-to-day equipment use.

Category:

Tag: #Imperial #36329

Description: The Imperial 36329 Knob provides simple and reliable control for adjusting equipment settings in commercial kitchens. This component is designed to fit onto a compatible control shaft, allowing users to regulate functions such as temperature or gas flow through a smooth turning motion. Its straightforward design supports precise adjustments during operation, helping maintain consistent performance. Built for durability, it withstands frequent handling in busy environments. Easy to install and replace, it serves as a practical part that helps ensure safe operation, improves user control, and supports efficient day-to-day equipment use.

Category:

Tag: #Imperial #36329

Description: The Rational 87.00.577 Steam Oven Ignition Module ensures reliable burner ignition for consistent oven operation. This electronic component works by generating and controlling the spark needed to ignite the gas burner, while also monitoring the flame to confirm proper ignition. It coordinates signals within the oven system to maintain safe and efficient startup and operation. Its design supports dependable performance in commercial cooking environments where consistency is important. By providing accurate ignition control, it helps reduce startup issues, improve safety, and maintain steady cooking conditions, making it a practical replacement part for efficient equipment operation.

Category:

Tag: #Rational #87.00.577

Description: The Traulsen 263708 Door Hinge Assembly ensures smooth and stable door movement for reliable refrigeration performance. This component is designed to support and guide the door as it opens and closes, maintaining proper alignment with the cabinet. It works by providing a pivot point that allows controlled motion while helping the door return to a secure closed position. Its durable construction is suitable for frequent use in commercial environments. By supporting proper sealing, it helps reduce cold air loss and maintain consistent internal temperatures, contributing to energy efficiency and dependable day-to-day operation.

Category:

Tag: #Traulsen #263708

Description: The Delfield 3234617KT-S Refrigerator Edgemount Cam Lift Hinge ensures smooth door operation and proper sealing for efficient refrigeration performance. This hinge is designed to mount on the edge of the unit and uses a cam lift mechanism that slightly raises the door as it opens and lowers it into position when closed. This action helps create a tight seal, reducing cold air loss and supporting consistent internal temperatures. Its durable construction is suited for frequent use in commercial environments. Easy to install, it contributes to improved energy efficiency, reliable door alignment, and overall equipment longevity.

Category:

Tag: #Delfield #3234617KT-S

Description: The Imperial 0310 Pilot Burner Natural Gas provides a steady ignition source for reliable operation of gas-powered equipment. This component works by producing a small, continuous flame that ignites the main burner when needed. It is designed for use with natural gas and helps ensure consistent startup and operation of the appliance. Its simple and durable construction supports dependable performance in commercial kitchen environments. By maintaining a stable pilot flame, it enhances safety and reduces delays during operation, making it a practical replacement part for keeping equipment functioning smoothly and efficiently.

Category:

Tag: #Imperial #0310

Description: The Imperial 1020 15-1/4" Tubular Steel Burner provides consistent heat output for reliable cooking performance in commercial equipment. This burner operates by mixing gas and air within the tube, with the adjustable air shutter allowing control over the air-to-gas ratio for efficient combustion. Once ignited, it produces an even flame along its length to distribute heat effectively. Its tubular steel construction supports durability under high-temperature conditions. By promoting proper combustion, it helps improve energy efficiency and cooking consistency while reducing uneven heating, making it a practical replacement part for maintaining steady and dependable operation.

Category:

Tag: #Imperial #1020

Description: The Lincoln 369012 Fuse Holder provides secure fuse placement to help protect electrical components from overload and short circuits. This component is designed to house and hold a compatible fuse firmly in place within the equipment’s electrical system, ensuring proper contact for uninterrupted current flow. It works by allowing electricity to pass through the installed fuse, which will break the circuit if excessive current is detected. Its sturdy construction supports reliable performance in commercial equipment. Easy to install and replace, it helps simplify maintenance, improve electrical safety, and support the consistent operation of connected components.

Category:

Tag: #Lincoln #369012

Description: The Southbend 1175016 Range Gas Control Valve 1/2" 24V provides precise regulation of gas flow for safe and consistent range operation. This gas control valve uses a 24-volt electrical signal to open or close, allowing gas to flow to the burner only when needed. Designed with a 1/2" connection, it supports secure integration with compatible gas lines. By controlling fuel delivery based on temperature or operational demand, it helps maintain stable heat levels during cooking. Its function supports improved safety by preventing uncontrolled gas flow, while also contributing to energy efficiency and reliable performance in commercial kitchen equipment.

Category:

Tag: #Southbend #1175016

Description: The TRUE 800382 Cooler Control provides precise temperature regulation to maintain consistent cooling performance. This component works by sensing internal temperature through its 72-1/2" capillary tube and adjusting the cooling cycle accordingly via the control mechanism. The included dial and slot stem allow users to set and modify temperature levels with ease. Its responsive design helps ensure stable operation by activating or deactivating the compressor as needed. Suitable for commercial refrigeration units, it supports proper food storage conditions, improves energy efficiency, and helps reduce temperature fluctuations, making it a practical replacement part for reliable day-to-day operation.

Category:

Tag: #TRUE #800382

Description: The Southbend 1175670 Range 60 Min Timer provides accurate time control to support efficient cooking operations. This 115V timer functions by counting down a preset duration of up to 60 minutes and sending a signal to alert users or control connected components when the cycle is complete. It features a D stem design and two leads for proper installation and compatibility with designated equipment. By helping monitor cooking times, it supports consistency and reduces the risk of overcooking. Designed for reliable performance, it serves as a practical replacement part that contributes to smoother workflow and better time management in commercial kitchens.

Category:

Tag: #Southbend #1175670

Description: The Duke 153565SED 1/2-1/4HP 2-Speed Oven Motor delivers dependable airflow for consistent and efficient oven operation. Designed to run on 115V, it features dual speed settings of 1725 and 1140 RPM, allowing it to adapt fan performance based on cooking needs. The motor works by converting electrical energy into mechanical motion, driving the fan to circulate heat evenly throughout the oven cavity. This helps maintain uniform temperatures and supports consistent cooking results. Built for commercial environments, it offers reliable performance, while its two-speed functionality aids in better heat control and energy efficiency during daily use.

Category:

Tag: #Duke #153565SED

Description: The Duke 153035 1/2-1/4HP 2-Speed Oven Motor provides reliable airflow control for consistent oven performance. This motor operates on 115V and features dual speed settings of 1725 and 1140 RPM, allowing it to adjust fan operation based on cooking requirements. It works by converting electrical energy into mechanical motion to drive the oven fan, ensuring even heat circulation throughout the cooking chamber. Its two-speed capability supports flexibility and improved temperature management. Designed for regular commercial use, it helps maintain uniform cooking results, reduces hot spots, and serves as a practical replacement to support efficient and dependable oven operation.

Category:

Tag: #Duke #153035

Description: The Garland 4518817 Range Thermocouple provides reliable flame sensing to support safe gas appliance operation. This 18" thermocouple works by generating a small electrical voltage when heated by the pilot flame, signaling the gas valve to remain open. If the flame goes out, the voltage drops, prompting the valve to shut off the gas supply. Its design ensures proper fit and responsiveness in compatible equipment. By helping prevent unburned gas flow, it enhances safety while supporting consistent burner performance, making it a practical replacement part for maintaining dependable and secure kitchen operations.

Category:

Tag: #Garland #4518817

Description: The Intedge 12H316 Grinder Plate 3/16" delivers consistent and precise grinding results for food preparation tasks. This component is designed to fit into compatible meat grinders, where it works with the cutting blade to process food by forcing it through 3/16" holes for uniform texture. Its construction supports steady performance under regular use, helping maintain efficiency in commercial kitchen operations. By producing evenly ground product, it contributes to better portion control and product consistency. Easy to install and replace, it serves as a practical part for maintaining reliable grinder functionality and smooth daily operation.

Category:

Tag: #Intedge #12H316

Description: The Town Foodservice Equipment 249011 Pilot Safety Valve provides dependable gas flow control with added safety for commercial cooking equipment. This component works by regulating gas supply to the pilot and main burner, automatically shutting off the flow if the pilot flame is extinguished. It includes 3/8" NPT reducer bushings, a 1/4" CCT pilot outlet, and a 1/2" connection for proper installation and compatibility. Its design supports safe and consistent operation by preventing gas leaks and maintaining stable performance. Suitable for routine replacement, it helps ensure reliable functionality while contributing to safer kitchen environments and reduced risk of operational issues.

Category:

Tag: #TownFoodserviceEquipment #249011

Description: The Hobart XNC14X24 Toaster Element 328W 116V provides consistent heat generation for efficient toasting performance. This heating element operates by converting electrical energy into radiant heat, evenly warming the toaster chamber to achieve uniform browning of food items. With a 328W output at 116V, it supports steady and reliable operation in commercial kitchen equipment. Its design helps ensure even heat distribution, reducing the chances of uneven toasting. Suitable for routine replacement, it contributes to maintaining proper equipment functionality, improving consistency in results, and minimizing downtime during regular use.

Category:

Tag: #Hobart #XNC14X24 #ToasterElement

Description: The Hatco 02.30.043.00 Display Cabinet Lamp provides reliable illumination while enhancing safety in food display environments. This 60W, 120V lamp works by converting electrical energy into light, ensuring clear visibility of displayed items for both staff and customers. It features a shatterproof PTFE coating that helps contain glass fragments in case of breakage, supporting safer operation in commercial settings. Designed for consistent performance, it aids in maintaining an appealing presentation of food products. Easy to install and compatible with designated equipment, it serves as a practical replacement that contributes to efficient operation and improved safety standards.

Category:

Tag: #Hatco #02.30.043.00

Description: The Imperial 38090 Convection Oven Slotted Kick Plate ICV provides protective coverage while supporting proper airflow in convection ovens. This component is installed at the base of the unit, where its slotted design allows air to circulate efficiently while shielding internal parts from debris and external contact. By maintaining airflow, it helps ensure consistent oven performance and prevents overheating of internal components. Its sturdy construction is suited for regular use in commercial kitchen environments. Easy to install and replace, it serves as a practical part that contributes to equipment protection, improved ventilation, and reliable day-to-day operation.

Category:

Tag: #Imperial #38090

Description: The Blodgett BL4644 Oven 3-Piece Deflector Assembly helps ensure even heat distribution for consistent cooking results. This assembly is designed to direct and regulate airflow within the oven by channeling heat across the cooking chamber. Comprising three pieces and measuring 20" x 33-1/2", it fits into compatible units to guide hot air movement more effectively. By balancing heat flow, it helps reduce hot spots and supports uniform baking or roasting performance. Built for durability in commercial environments, it serves as a practical replacement component that contributes to reliable oven operation and improved overall cooking consistency.

Category:

Tag: #Blodgett #BL4644

Description: The Bunn 29246.0000 Coffee Machine Electronic Timer ensures precise control over brewing cycles for consistent coffee preparation. This component functions by regulating the timing of water flow and brewing duration through an electronic control system, helping maintain accurate and repeatable results. It works by sending timed signals to the machine’s internal components, coordinating the start and stop of the brew process. Its reliable operation supports proper extraction and helps reduce inconsistencies in flavor. Designed for compatibility with select equipment, it offers a practical solution for maintaining efficient performance while minimizing the need for manual adjustments in daily use.

Category:

Tag: #Bunn #29246.0000 #CoffeeMachineElectronicTimer

Description: The Holman 198066 Quartz Heater 540W provides consistent radiant heat for efficient food warming and cooking applications. This component uses a quartz heating element that converts electrical energy into infrared heat, delivering quick and even temperature distribution across the target area. Its 540W output supports steady performance in commercial equipment where reliable heat is required. The design allows for fast response times, helping reduce warm-up periods and maintain consistent operation. Built for routine use, it offers dependable functionality while supporting energy efficiency, making it a practical replacement part for maintaining proper heating performance and minimizing operational interruptions.

Category:

Tag: #Holman #198066

Description: The Hobart 270329-1 Dishwasher 3/4" Hot Water Solenoid Valve ensures controlled water flow for efficient and consistent dishwashing performance. This valve operates electrically at 120V, opening and closing in response to signals from the dishwasher to regulate hot water entry at pressures up to 125 PSI. Its 3/4" connection supports proper water supply to the system during wash cycles. By maintaining accurate flow control, it helps improve cleaning effectiveness and prevents issues related to overfilling or inadequate water supply. Designed for reliable operation, it serves as a practical replacement part that supports smooth performance and reduces downtime in commercial kitchens.

Category:

Tag: #Hobart #270329-1

Description: The Frymaster 8067972 Fryer Thermostat Fenwal is a temperature-regulating component designed for commercial fryers, helping manage heat levels within the oil tank. It works by sensing the oil temperature and signaling the heating system to cycle on or off to maintain the set range. This controlled operation helps prevent overheating and ensures stable cooking conditions. By supporting precise temperature regulation, it contributes to even cooking results, reduced energy waste, and improved equipment safety. Its reliable function also assists in extending oil longevity and maintaining overall fryer efficiency in demanding kitchen environments.

Category:

Tag: #Frymaster #8067972

Description: The Vulcan Hart 00-345201-00001 Oven 1/3 HP Single Phase Motor delivers consistent airflow to support reliable oven operation. This motor operates at 230V with a speed of 1725 RPM, converting electrical energy into mechanical motion to drive internal fans that circulate heat evenly throughout the oven cavity. Its single-phase design makes it suitable for standard commercial kitchen setups. By promoting uniform temperature distribution, it helps improve cooking consistency and reduce hot spots. Built for regular use, it offers dependable performance and serves as a practical replacement component to help maintain efficient and stable oven functionality.

Category:

Tag: #VulcanHart #00-345201-00001

Description: The Imperial 1165 Oven Motor Kit W/ Mounting Plate 115V provides reliable airflow support for maintaining consistent oven performance. This kit includes a motor and mounting plate designed to drive the oven fan, circulating hot air evenly throughout the cooking chamber. Operating on 115V, it converts electrical energy into mechanical motion to ensure steady fan operation. The included mounting plate helps simplify installation and secure proper alignment within the unit. By promoting uniform heat distribution, it supports consistent cooking results and reduces hot spots. Suitable for commercial use, it offers dependable performance and helps minimize downtime during maintenance or replacement.

Category:

Tag: #Imperial #1165 #OvenMotorKitMountingPlate

Description: The Southbend 1182553 Griddle Snap Action Thermostat provides accurate temperature regulation for consistent griddle performance. This component works by sensing surface temperature through its probe and using a snap-action mechanism to open or close the electrical circuit, maintaining the desired heat level. With dimensions of 3/8" diameter by 5" length and a 30" capillary, it is designed for proper fit and responsiveness in compatible equipment. Its precise control helps prevent overheating and supports even cooking results. Suitable for commercial kitchens, it contributes to energy efficiency, reliable operation, and easier maintenance of optimal cooking conditions.

Category:

Tag: #Southbend #1182553

Description: The Manitowoc 000009122 Ice Machine Water Inlet Valve Kit ensures controlled and reliable water flow for efficient ice production. This component regulates the entry of water into the ice machine by opening and closing electronically based on signals from the system. Designed to operate across 208V, 230V, and 240V, it supports consistent performance in various commercial setups. By maintaining proper water supply levels, it helps improve ice quality and prevents issues related to overfilling or insufficient flow. Suitable for routine maintenance or replacement, it contributes to smooth machine operation, reduced downtime, and overall efficiency in daily use.

Category:

Tag: #Manitowoc #000009122

Description: The Glastender 06001453 Blower Assembly provides reliable airflow to support proper ventilation and cooling in compatible equipment. Operating at 120V, 60Hz, and 1.15A, this assembly works by using an internal motor to drive a fan that circulates air through designated areas, helping regulate temperature and maintain stable operation. Its consistent airflow aids in preventing overheating and supports overall equipment efficiency. Designed for commercial use, it offers dependable performance under regular operating conditions. With a straightforward installation process, it serves as a practical replacement component that helps maintain smooth functionality and reduces the risk of operational interruptions.

Category:

Tag: #Glastender #06001453

Description: The Blodgett 32302 Oven 2 SPD Motor provides dependable airflow control for consistent and efficient oven performance. This 1/4 HP motor operates on 208–230V/1PH and features two speed settings, allowing it to adjust fan rotation at 1725 or 1140 RPM based on cooking requirements. It works by converting electrical energy into mechanical motion, driving the fan to circulate heat evenly throughout the oven cavity. This helps maintain uniform temperatures and supports better cooking results. Built for regular commercial use, it offers reliable operation, while its dual-speed capability adds flexibility and energy efficiency in varying kitchen conditions.

Category:

Tag: #Blodgett #32302

Description: The Pitco PP10263 Fryer Magnetic Proximity Switch Actuator enables accurate position detection to support safe and efficient fryer operation. This component works by interacting with a magnetic proximity switch, triggering a response when aligned within range to signal equipment status or movement. Designed with a 5/8" slot and specific mounting dimensions, it ensures proper fit and reliable alignment during installation. Its durable construction supports consistent performance in high-use commercial kitchen environments. By helping monitor operational conditions, it contributes to improved safety and reduces the likelihood of e

Category:

Tag: #Pitco #PP10263 #FryerMagneticProximitySwitchActuator

Description: The Groen 123580 18" Heavy Duty Coaxial Thermocouple W/ 11/32"-32 Threads 20-30 MV ensures dependable flame sensing for safe and consistent equipment operation. This coaxial thermocouple is designed to detect heat from the pilot flame and generate a small electrical signal between 20–30 millivolts, which signals the gas valve to remain open during operation. Its 18-inch length and threaded connection support secure installation and proper positioning within compatible equipment. By continuously monitoring flame presence, it helps prevent unburned gas flow and supports reliable ignition performance. The durable construction assists in maintaining safety, improving operational stability, and helping reduce unexpected equipment shutdowns in commercial kitchen environments.

Category:

Tag: #Groen #123580

Description: The Manitowoc 000008660 Ice Thickness Probe Assembly helps ensure consistent ice production by accurately monitoring ice thickness during operation. This component functions by sensing the buildup of ice on the evaporator plate and signaling the machine when the desired thickness is reached, triggering the harvest cycle. Its precise detection supports proper timing and efficient performance of the ice-making process. Designed for compatibility with specific units, it aids in maintaining uniform ice quality while reducing the risk of overproduction or system strain. Easy to install and replace, it serves as a practical part for maintaining reliable and efficient ice machine operation.

Category:

Tag: #Manitowoc #000008660

Description: The Advance Tabco SU-P-215 Infinite Control 240V provides precise and adjustable heat regulation for commercial cooking equipment. This control component functions by varying the electrical output to heating elements, allowing users to set and maintain desired temperature levels through a smooth, continuous adjustment rather than fixed settings. Its 240V capacity supports consistent performance in demanding kitchen environments. By offering flexible control, it helps improve cooking accuracy and energy efficiency while reducing the risk of overheating. Designed for reliability and ease of installation, it serves as a practical replacement part that supports steady operation and effective equipment management.

Category:

Tag: #AdvanceTabco #SU-P-215

Description: The Southbend 1189600 Burner Valve Knob ensures precise control of heat levels for efficient cooking operations. This component is designed to fit onto a burner valve stem, allowing users to regulate gas flow through a smooth turning motion. By adjusting the knob, operators can increase or decrease flame intensity as needed for different cooking tasks. Its durable construction supports consistent performance in commercial kitchen environments where frequent use is common. The simple design allows for quick installation and replacement, helping maintain safe operation and steady equipment functionality while minimizing disruptions during daily use.

Category:

Tag: #Southbend #1189600

Description: The Southbend 1184689 Range Gas Valve Indicator Knob provides clear and precise control over gas flow in commercial cooking equipment. Designed with a 2-1/2" diameter, this knob attaches to the valve stem and operates through a simple turning motion to adjust flame levels as needed. The red indicator strip enhances visibility, allowing users to quickly identify settings for improved accuracy during operation. Its sturdy construction supports regular use in demanding kitchen environments. Easy to install and replace, it helps maintain safe operation while ensuring consistent heat control, making it a practical component for efficient range performance.

Category:

Tag: #Southbend #1184689

Description: The Blodgett BL90005 Oven CW Single Phase Induction Motor delivers reliable airflow support for consistent oven performance. This 1/3 HP motor operates on 115/230V and uses electromagnetic induction to generate rotational motion, driving internal fans that help circulate heat evenly within the oven. Its clockwise rotation ensures proper compatibility with designated equipment, contributing to stable and efficient operation. Built for routine commercial use, it supports steady performance while helping reduce uneven cooking results. The motor’s durable construction and straightforward installation make it a practical replacement option, aiding in maintaining optimal functionality and minimizing potential downtime in kitchen environments.

Category:

Tag: #Blodgett #BL90005

Description: The Manitowoc 2007939 Ice Kube Machine Terminal Rocker Switch provides dependable control for managing power functions in ice machines. Designed as an electrical switch rated for 125–250 VAC, it operates through a simple rocker action that allows users to easily turn the machine on or off as needed. Its construction supports consistent performance in commercial environments where reliability is important. The switch helps ensure smooth equipment operation while reducing the risk of interruptions caused by worn or faulty controls. With straightforward installation and compatibility with designated units, it serves as a practical replacement part that supports efficient maintenance and daily operation.

Category:

Tag: #Manitowoc #2007939

Description: The Keating 035030 Fryer Rocker Switch is a reliable control component designed to manage the power function of commercial fryers efficiently. It operates through a simple rocking mechanism that allows users to turn the fryer on or off with ease, ensuring quick response during kitchen operations. Built for durability, it withstands frequent use in demanding environments. The switch helps maintain consistent equipment performance while minimizing downtime caused by faulty controls. Its straightforward design supports easy installation and replacement, making it a practical choice for maintenance. Overall, it contributes to safer operation and improved workflow in professional food service settings.

Category:

Tag: #Keating #035030

Description: The Moffat 234625 Convection Oven Fan ensures consistent air circulation for even and efficient cooking performance. This component is designed for use in compatible convection ovens, where it helps distribute hot air uniformly throughout the cooking chamber. It works by continuously moving heated air around the oven cavity, reducing temperature variations and supporting faster, more consistent cooking results. Built for reliable operation, the fan aids in maintaining proper airflow, which can improve cooking efficiency and reduce uneven baking or roasting. Moffat 234625 is a practical replacement part that helps keep ovens functioning smoothly in busy kitchen environments.

Category:

Tag: #Moffat #234625

Description: The Imperial 37491 Range Heating Element delivers reliable and consistent heat for commercial cooking equipment. Designed as a 2000W, 208V replacement component, it is used in compatible ranges to generate the necessary heat for cooking surfaces. The element works by converting electrical energy into heat through a ??? resistance coil, ensuring even temperature distribution. Its durable construction supports regular use in demanding kitchen environments while helping maintain efficient performance. Imperial 37491 offers a practical solution for restoring heating functionality, reducing downtime, and supporting consistent cooking results, making it a dependable choice for routine maintenance and equipment upkeep.

Category:

Tag: #Imperial #37491

Description: The Blodgett 58195 Convection Oven Solid State Digital RTD Controller Kit provides precise temperature control to support consistent and reliable oven performance. This kit functions as a digital control system that uses an RTD (resistance temperature detector) sensor to accurately measure internal oven temperature and adjust heating output accordingly. By maintaining stable heat levels, it helps ensure even cooking results and reduces temperature fluctuations during operation. Designed for compatibility with select convection ovens, the Blodgett 58195 controller kit contributes to improved energy efficiency, dependable performance, and easier temperature management in commercial kitchen environments.

Category:

Tag: #Blodgett #58195 #ConvectionOvenSolidStateDigitalRTDControllerKit

Description: The Frymaster 8262014 Fryer Thermostat Kit with a 24" capillary and a 375°F rating ensures accurate temperature regulation for consistent frying performance. Designed as a replacement thermostat, it monitors oil temperature and automatically cycles the heating element to maintain the set level, helping prevent overheating or undercooking. This kit supports efficient fryer operation by promoting even cooking results and reducing the risk of oil degradation. Compatible with select commercial fryers, the Frymaster 8262014 thermostat kit is a practical solution for maintaining equipment reliability, minimizing downtime, and supporting safe kitchen operations without unnecessary complexity.

Category:

Tag: #Frymaster #8262014

Description: The Blodgett 37003 Convection Oven Lower Door Support/Turnbuckle Assembly provides stable door alignment to support proper oven operation and sealing. This assembly works by connecting and adjusting the lower portion of the oven door, using a turnbuckle mechanism to maintain correct tension and positioning. It helps keep the door properly aligned with the frame, ensuring a secure closure during use. The design allows for fine adjustments to compensate for wear over time. By maintaining a tight seal and proper alignment, it helps improve heat retention, supports consistent cooking conditions, and contributes to reliable performance in commercial convection oven systems.

Category:

Tag: #Blodgett #37003 #ConvectionOvenLowerDoorSupportTurnbuckleAssembly

Description: The Vulcan Hart VH844516-16 Oven Infrared Burner Top Box 16-3/4" x 6-3/4" Ceramic Burn Area 15-1/4" x 5-1/4" provides efficient radiant heat for consistent and controlled cooking performance. This infrared burner assembly works by distributing gas across a ceramic surface, where it is ignited to produce infrared energy that transfers heat directly to food or cooking surfaces. The design supports even heat output and quick response to temperature adjustments. Its construction allows for reliable operation under high-temperature conditions. By promoting uniform heating and efficient energy use, it helps improve cooking consistency and supports dependable performance in commercial oven applications.

Category:

Tag: #VulcanHart #VH844516-16

Description: The Keating 004898 Scraper Blades Stainless Steel 4" 10-Pack provides an effective solution for removing residue and buildup from cooking surfaces. These blades are designed for use with compatible scrapers, working by applying firm, even pressure to lift grease, carbon deposits, and food debris. The stainless steel construction supports durability and resistance to wear during regular cleaning tasks. Each 4-inch blade offers a suitable size for controlled and precise scraping. By helping maintain clean surfaces and reducing buildup, they support better equipment performance and hygiene, making them a practical choice for routine maintenance in commercial kitchen environments.

Category:

Tag: #Keating #004898

Description: The Allpoints 136137 Flatware Retriever Rect provides a practical solution for safely retrieving flatware from dishwashing or disposal areas. This tool is designed to help capture and remove utensils that may be lost in sinks, wash tanks, or waste systems. It works by using its flat, rectangular shape to easily slide into tight spaces and collect items without requiring direct hand contact. The design supports efficient handling in busy kitchen environments. By reducing the risk of lost utensils and improving safety during retrieval, it helps maintain organization and supports smoother workflow in commercial foodservice operations.

Category:

Tag: #Allpoints #136137

Description: The Frymaster 8072424 Fryer LP Gas Valve, 9.0" WC 1/2" provides controlled gas regulation for safe and consistent fryer operation. This valve works by managing the flow of LP gas at a set pressure of 9.0 inches water column, ensuring the correct amount of fuel reaches the burner. It opens and closes in response to system controls, allowing precise adjustment of heat output. The 1/2-inch connection supports compatibility with standard gas lines. By maintaining steady gas flow and proper pressure, it helps support efficient combustion, consistent cooking temperatures, and reliable performance in commercial fryer equipment.

Category:

Tag: #Frymaster #8072424

Description: The Keating 023625 Gas Valve 1/2" x 4" provides controlled gas flow for safe and consistent equipment operation. This gas valve is designed to regulate the passage of gas from the supply line to the burner, allowing proper adjustment of fuel delivery. It works by opening or closing based on system controls or manual input, ensuring the correct amount of gas reaches the burner for efficient combustion. The 1/2-inch connection supports compatibility with standard fittings. By maintaining steady gas flow and supporting reliable control, it helps ensure consistent performance and contributes to safe operation in commercial kitchen equipment.

Category:

Tag: #Keating #023625 #GasValve

Description: The TRUE 979439 Refrigerator Reel Retriever Door Closer 2.0Lb Pull provides consistent automatic door closing to help maintain proper refrigeration conditions. This component works by using a spring-loaded reel mechanism that gently pulls the door closed after it has been opened. The 2.0 lb pull force offers controlled tension, ensuring the door returns to a closed position without slamming. It helps keep the door securely shut, reducing temperature loss and limiting strain on the cooling system. By supporting proper door closure, it contributes to improved energy efficiency, better temperature stability, and reliable operation in commercial refrigeration equipment.

Category:

Tag: #TRUE #979439

Description: The TRUE 844950 Refrigerator Temperature Control Kit provides accurate temperature regulation to maintain proper cooling conditions. This kit includes the necessary components to monitor and control the internal temperature of the refrigerator by cycling the compressor on and off as needed. It works by sensing temperature changes and sending signals to adjust cooling output, helping maintain a consistent environment. The design supports reliable integration with compatible refrigeration systems. By ensuring stable temperature control, it helps preserve product quality, reduce energy fluctuations, and support efficient operation, making it a practical solution for maintaining dependable refrigeration performance.

Category:

Tag: #TRUE #844950

Description: The Imperial 35717 Pushbutton Micro Roller Switch W/ 3-Terminals 125A 15/250/480VAC provides dependable circuit control for accurate and responsive equipment operation. This switch functions by using a pushbutton with a roller actuator that triggers internal contacts to open or close an electrical circuit when engaged. The three-terminal configuration allows for versatile wiring options, supporting different control setups. Designed to handle multiple voltage ratings, it suits a range of commercial applications. By enabling precise switching and consistent response, it helps maintain proper system function and supports reliable performance in equipment requiring controlled electrical activation.

Category:

Tag: #Imperial #35717

Description: The TRUE 810231 Refrigerator Drain Pan 25-1/4" x 12-3/8" x 1-3/4" provides effective collection of excess water to support clean and efficient refrigerator operation. This drain pan is designed to sit beneath the unit, where it captures condensation and defrost water as it drains from the system. It works by holding the collected liquid until it evaporates or is manually emptied, helping prevent leaks and moisture buildup. Its size and construction support proper fit and durability during regular use. By managing water runoff, it helps maintain cleanliness, reduce potential damage, and support reliable performance in commercial refrigeration equipment.

Category:

Tag: #TRUE #810231 #RefrigeratorDrainPan

Description: The Middleby Marshall 64149 Oven Speed Control Board W/Digital Display provides precise control over conveyor speed for consistent cooking performance. This control board works by regulating the motor speed based on user-selected settings, allowing operators to adjust how quickly food moves through the oven. The digital display offers clear visibility of settings and supports accurate adjustments during operation. It processes input signals and manages output to maintain steady and reliable performance. By helping ensure consistent cook times and smooth operation, it supports improved efficiency and dependable results, making it a practical replacement component for maintaining proper functionality in conveyor oven systems.

Category:

Tag: #MiddlebyMarshall #64149

Description: The Lincoln 369532 Single Trial Ignition Control 24V 60HZ 0.2 AMP provides dependable ignition management for safe and controlled equipment startup. This ignition control module works by sending a single ignition attempt when activated, delivering voltage to the igniter and monitoring for flame presence. If ignition is not confirmed, it stops the gas flow to help prevent unsafe conditions. Operating at 24V with low current draw, it integrates with compatible systems for efficient control. By ensuring proper ignition sequencing and safety shutdown, it supports reliable performance and helps maintain safe operation in commercial gas-powered equipment.

Category:

Tag: #Lincoln #369532

Description: The Duke 175536 Igniter W/Wire Lead provides reliable ignition to support safe and consistent startup of gas-powered equipment. This igniter works by generating a spark or heat source when electrical current passes through it, igniting the gas to start the burner. The attached wire lead allows for proper connection to the ignition system, supporting straightforward installation. Its design helps ensure dependable performance in high-temperature environments. By enabling consistent ignition and reducing startup issues, it supports efficient operation and helps maintain reliable performance, making it a practical replacement component for maintenance and repair of commercial kitchen equipment.

Category:

Tag: #Duke #175536

Description: The Garland 4525399 Grill SIT Thermostat Assembly W/ Control, Bracket, Screws, and Sleeving provides precise temperature regulation for consistent grill performance. This assembly works by sensing heat levels and controlling gas flow to maintain the desired cooking temperature. It adjusts the burner output based on temperature changes, helping ensure stable and even heat during operation. The included control components, bracket, screws, and sleeving support proper installation and secure positioning. By maintaining accurate temperature control, it helps improve cooking consistency and reduces fluctuations. It serves as a practical replacement solution for maintaining reliable and efficient operation in commercial grilling equipment.

Category:

Tag: #Garland #4525399

Description: The Blodgett 52302 Oven Safety Retrofit Kit for 1000 Series provides an effective way to enhance safety and maintain proper operation in compatible oven systems. This retrofit kit is designed to update existing components, helping improve safety controls and overall functionality. It works by integrating with the oven’s current setup to support reliable monitoring and response to operating conditions. The included components assist in maintaining proper system performance while addressing wear or outdated parts. By supporting safer operation and improved reliability, it helps extend equipment usability and ensures continued performance, making it a practical option for maintenance and system upgrades in commercial oven applications.

Category:

Tag: #Blodgett #52302 #OvenSafetyRetrofitKit

Description: The Manitowoc 000000084 Ice Machine Cleaner Metal Safe provides an effective solution for removing mineral buildup and maintaining clean ice machine components. This cleaner is formulated to break down scale deposits such as lime and calcium that accumulate during regular operation. It works by circulating through the system or being applied to affected areas, dissolving buildup without damaging metal surfaces. Its metal-safe formulation supports use on key internal parts, helping preserve equipment condition. By promoting cleaner components and improved water flow, it supports consistent ice quality and efficient operation, making it a practical choice for routine maintenance in commercial ice machines.

Category:

Tag: #Manitowoc #000000084

Description: The Southbend 1175263 Oven Element Assembly 10.8kW 208V provides consistent and efficient heat generation for reliable oven performance. This heating element assembly works by converting electrical energy into heat, which is then distributed throughout the oven cavity to maintain the desired cooking temperature. With a 10.8kW output and 208V operation, it supports steady and effective heating in compatible equipment. Its design allows for uniform heat distribution, helping reduce temperature variations during use. By delivering dependable heating and supporting consistent cooking conditions, it serves as a practical replacement component for maintaining proper functionality and efficiency in commercial oven systems.

Category:

Tag: #Southbend #1175263 #OvenElementAssembly

Description: The Imperial 36330 Burner Valve Knob provides a simple and reliable way to control burner heat levels for consistent cooking performance. This knob is designed to fit onto a compatible valve stem, allowing users to adjust gas flow by turning it to increase or decrease flame intensity. It works by engaging the internal valve mechanism, enabling precise control over ignition and heat output. The design supports smooth handling and clear operation during use. By allowing accurate adjustments and replacing worn or damaged controls, it helps maintain proper functionality and supports efficient operation in commercial range equipment.

Category:

Tag: #Imperial #36330

Description: The Frymaster 8261072 Fryer IR Burner 15-1/4" x 8-1/2" Steel provides efficient heat generation for consistent fryer performance. This infrared burner is designed to distribute gas evenly across its surface, where it is ignited to produce radiant heat that transfers directly to the fryer oil. It works by emitting infrared energy, helping achieve faster and more uniform heating compared to conventional burners. The steel construction supports durability under high-temperature conditions. By promoting efficient heat transfer and stable operation, it helps maintain consistent cooking temperatures and supports reliable performance, making it a practical replacement component for commercial fryer equipment.

Category:

Tag: #Frymaster #8261072

Description: The Garland 4530671 Range Burner Valve 3/8-27 Outlet 1/8" NPT Inlet provides precise control of gas flow for reliable burner operation. This valve works by regulating the amount of gas passing from the inlet to the burner, allowing users to adjust flame intensity through the connected control knob. Its 1/8-inch NPT inlet and 3/8-27 outlet support secure connections with compatible fittings. The design helps maintain steady and controlled gas delivery during use. By enabling accurate heat adjustments and dependable flow control, it supports consistent cooking performance and serves as a practical replacement component for maintaining proper function in commercial range equipment.

Category:

Tag: #Garland #4530671 #RangeBurnerValveOutlet

Description: The Tri-Star AS-1219804 Oven 1/4HP 2-Speed Motor 1725/1140 RPM 115V provides reliable airflow control to support consistent oven performance. This motor works by converting electrical energy into mechanical motion, driving a fan or blower to circulate air throughout the oven cavity. Its two-speed capability allows operation at either 1725 or 1140 RPM, offering flexibility based on cooking or ventilation needs. Designed for 115V operation, it integrates easily with compatible equipment. By promoting steady air circulation and balanced heat distribution, it helps improve cooking consistency and supports efficient operation, making it a practical replacement option for maintaining dependable oven functionality. The Tri-Star AS-1219804 Oven 1/4HP 2-Speed Motor 1725/1140 RPM 115V provides reliable airflow control to support consistent oven performance. This motor works by converting electrical energy into mechanical motion, driving a fan or blower to circulate air throughout the oven cavity. Its two-speed capability allows operation at either 1725 or 1140 RPM, offering flexibility based on cooking or ventilation needs. Designed for 115V operation, it integrates easily with compatible equipment. By promoting steady air circulation and balanced heat distribution, it helps improve cooking consistency and supports efficient operation, making it a practical replacement option for maintaining dependable oven functionality.

Category:

Tag: #Tri-Star #AS-1219804 #OvenSpeedMotor

Description: The Blodgett 32244 Motor, 2-Speed, 208-240V, 1/3HP, 1725/1140 RPM provides reliable and adjustable airflow for consistent equipment performance. This motor works by converting electrical energy into mechanical motion, operating at two selectable speeds to drive fans or blowers based on system requirements. The dual-speed capability allows flexibility in airflow control, supporting both high and low demand conditions. Designed for 208–240V operation, it integrates with compatible setups for steady performance. By enabling controlled air movement and efficient operation, it helps maintain stable temperatures and supports consistent results, making it a practical replacement component for commercial equipment maintenance and repair.

Category:

Tag: #Blodgett #32244 #MotorSpeed

Description: The Manitowoc 000007052 Ice Machine Water Level Probe provides accurate water level detection to support consistent ice production. This probe works by sensing the presence of water through electrical conductivity, signaling the control system when the proper water level is reached or when refilling is needed. It helps regulate the fill cycle, ensuring the machine maintains the correct amount of water for efficient operation. Its design allows for reliable performance in continuous-use environments. By maintaining proper water levels, it supports consistent ice quality, helps prevent overfilling or shortages, and contributes to the overall efficiency and dependable operation of ice machine systems.

Category:

Tag: #Manitowoc #000007052

Description: The Middleby Marshall 273810054 Convection Oven Motor provides reliable airflow to support even heat distribution during cooking. This motor works by converting electrical energy into mechanical motion, driving a fan that circulates hot air throughout the oven cavity. The continuous airflow helps maintain uniform temperatures and reduces hot or cold spots that can affect cooking results. Its design supports steady operation in commercial environments where consistent performance is required. By promoting balanced heat circulation, it helps improve cooking efficiency and overall food quality, making it a practical replacement component for maintaining proper function in convection oven systems.

Category:

Tag: #MiddlebyMarshall #273810054

Description: The Imperial 36017 Convection Oven Thermocouple 18" W/M10 Nut provides reliable flame sensing to support safe and consistent oven operation. This thermocouple works by generating a small electrical signal when exposed to heat from the pilot flame, which signals the gas control valve to remain open. If the flame is lost, the signal stops and the gas supply is shut off to prevent unsafe conditions. The 18-inch length allows flexible installation, while the M10 nut supports secure connection. By ensuring proper flame detection and gas shutoff, it helps enhance safety and maintain dependable performance in convection oven systems.

Category:

Tag: #Imperial #36017 #ConvectionOvenThermocoupleNut

Description: The Atosa 301030003 Fryer Natural Gas Safety Control 7000 BMVR 3.5" WC provides controlled gas regulation and safety shutoff for reliable fryer operation. This safety control works by regulating gas flow at a set pressure of 3.5 inches water column while responding to signals from connected components such as thermopiles or thermostats. It opens to allow gas flow during normal operation and closes automatically if unsafe conditions are detected, helping prevent gas leaks. Its design supports consistent burner performance and system protection. By ensuring proper gas control and dependable shutoff, it contributes to safer operation and helps maintain stable performance in commercial fryer equipment.

Category:

Tag: #Atosa #301030003 #FryerNaturalGasSafetyControl

Description: The Southbend 1195448 Oven Flame Sensor 90° provides reliable flame detection to support safe and consistent oven operation. This sensor works by monitoring the presence of a burner flame and sending a signal to the control system to confirm ignition. If no flame is detected, it helps trigger a shutdown to prevent unburned gas from accumulating. The 90-degree design allows for proper positioning within the oven assembly for accurate sensing. Its construction supports dependable performance in high-temperature environments. By ensuring proper flame verification, it contributes to safer operation and helps maintain efficient performance in commercial oven equipment.

Category:

Tag: #Southbend #1195448 #OvenFlameSensor

Description: The Blodgett 32291 Blower Motor 100-115V, 1/2HP, 1P provides reliable airflow to support even heat distribution in oven systems. This blower motor works by converting electrical energy into mechanical rotation, driving a fan that circulates hot air throughout the cooking chamber. Its 1/2 horsepower capacity helps maintain steady airflow, while the 100–115V single-phase design supports compatibility with standard electrical setups. The consistent air movement helps reduce temperature variations and supports uniform cooking results. By promoting efficient heat circulation and stable performance, it serves as a practical replacement component for maintaining proper operation in commercial oven equipment.

Category:

Tag: #Blodgett #32291 #BlowerMotor

Description: The Middleby Marshall 31020 Oven Speed Control Board W/ Remote Digital Display 5-3/8" x 5-1/2" provides precise control over conveyor speed to support consistent cooking results. This control board works by regulating the motor speed based on user settings, allowing operators to adjust how quickly items move through the oven. The remote digital display enables clear monitoring and easy adjustments during operation. It processes input signals and manages output to maintain steady performance. By ensuring accurate speed control, it helps improve cooking consistency and workflow efficiency. It serves as a practical replacement component for maintaining reliable operation in conveyor oven systems.

Category:

Tag: #MiddlebyMarshall #31020

Description: The Garland 4524670 Range Open Burner Knob Kit provides a simple and reliable way to control burner heat levels for consistent cooking performance. This knob kit is designed to fit compatible range valves, allowing users to adjust gas flow by turning the knob to increase or decrease flame intensity. It works by engaging with the valve stem to regulate the amount of gas delivered to the burner. The design supports smooth operation and clear control during use. By enabling accurate heat adjustments and replacing worn or damaged knobs, it helps maintain proper functionality and supports efficient operation in commercial kitchen equipment.

Category:

Tag: #Garland #4602913 #RangeCastIronRadiant

Description: The Garland 4524670 Range Open Burner Knob Kit provides a simple and reliable way to control burner heat levels for consistent cooking performance. This knob kit is designed to fit compatible range valves, allowing users to adjust gas flow by turning the knob to increase or decrease flame intensity. It works by engaging with the valve stem to regulate the amount of gas delivered to the burner. The design supports smooth operation and clear control during use. By enabling accurate heat adjustments and replacing worn or damaged knobs, it helps maintain proper functionality and supports efficient operation in commercial kitchen equipment.

Category:

Tag: #Garland #4524670 #RangeOpenBurnerKnobKit

Description: The Lang LG2U-30200-12 Convection Oven Motor provides consistent airflow to support even heat distribution in convection oven systems. This motor works by converting electrical energy into mechanical rotation, powering a fan that circulates hot air throughout the oven cavity. The continuous air movement helps maintain uniform temperatures, reducing hot spots and improving cooking consistency. Its construction supports reliable operation under regular use in commercial environments. By promoting steady airflow and balanced heat circulation, it helps enhance cooking efficiency and overall performance. It serves as a practical replacement part for maintaining dependable functionality in convection oven equipment.

Category:

Tag: #Lang #LG2U-30200-12 #ConvectionOvenMotor

Description: The Lang 30200-12 Convection Oven Motor provides reliable airflow to support even heat distribution during cooking processes. This motor works by converting electrical energy into mechanical motion, driving a fan that circulates hot air throughout the oven cavity. The continuous airflow helps reduce temperature variations and promotes uniform cooking results. Its design supports steady operation in demanding kitchen environments. By maintaining consistent air movement, it helps improve cooking efficiency and reduce uneven baking or roasting. It serves as a practical replacement component for maintaining dependable performance and proper functionality in convection oven systems.

Category:

Tag: #Lang #30200-12 #ConvectionOvenMotor

Description: The Lang 2U30200-12 Motor 1/3 HP 1725 RPM 5.2-6.2A 115/230V 1PH 50/60Hz provides dependable mechanical power for driving components in commercial equipment. This motor works by converting electrical energy into rotational motion at 1725 RPM, allowing it to operate fans, blowers, or other connected parts. Its 1/3 horsepower rating supports steady performance, while dual voltage capability (115/230V) offers flexibility for different electrical setups. Designed for single-phase operation, it integrates easily into compatible systems. By delivering consistent motion and reliable output, it helps maintain proper equipment function and supports efficient operation in maintenance, repair, or replacement applications.

Category:

Tag: #Lang #2U30200-12 #Motor #Langparts

Description: The Lang LG2U30200-12 Convection Oven Motor provides reliable power for circulating air and maintaining even heat distribution in convection ovens. This motor works by converting electrical energy into mechanical motion, driving a fan that moves hot air throughout the oven cavity. This continuous airflow helps eliminate temperature variations and supports uniform cooking results. Its design allows for steady operation under regular use in commercial settings. By promoting consistent heat circulation, it helps improve cooking efficiency and reduces uneven baking or roasting. It serves as a practical replacement component for maintaining proper performance and dependable operation in convection oven systems.

Category:

Tag: #Lang #LG2U30200-12 #ConvectionOvenMotor

Description: The Manitowoc 000014062 Ice Machine Water Dump Solenoid Valve 120V provides controlled water discharge to support proper ice machine operation and maintenance cycles. This solenoid valve works by using an ?????romagnetic mechanism to open and close the water flow when energized, allowing the system to release excess or used water at specific stages. Designed for 120V operation, it integrates with the machine’s control system to ensure timely and accurate water dumping. Its reliable function helps prevent buildup of impurities and supports clean ice production. By maintaining proper water management, it contributes to efficient performance and helps extend the overall reliability of the equipment.

Category:

Tag: #Manitowoc #000014062 #IceMachineWaterDumpSolenoidValve

Description: The Allpoints 8012864 Biodegradable Descaler 1 Gallon Rydlyme provides an effective solution for removing scale buildup and maintaining equipment efficiency. This liquid descaler works by breaking down mineral deposits such as lime and calcium that accumulate inside water lines, heating elements, and related components. It is designed to circulate through the system, dissolving buildup without causing damage to compatible materials. The biodegradable formulation supports safer handling and disposal compared to harsher chemicals. By helping restore proper flow and heat transfer, it contributes to improved performance and reduced maintenance issues, making it a practical choice for routine cleaning in commercial equipment applications.

Category:

Tag: #Allpoints #8012864 #BiodegradableDescalerGallonRydlyme

Description: The TRUE 800402 Refrigerator Shaded Pole Fan Motor W/ Shaft Threaded CW provides consistent airflow to support efficient cooling in refrigeration systems. This motor operates using a shaded pole design, converting electrical energy into rotational motion to drive a fan in a clockwise direction. The threaded shaft allows for secure attachment of compatible fan blades, ensuring stable operation during use. It works by circulating air within the unit, helping maintain uniform temperatures across the interior. By promoting steady airflow and reducing temperature variations, it supports proper food storage conditions and contributes to reliable, energy-efficient performance in commercial refrigeration equipment.

Category:

Tag: #TRUE #800402 #RefrigeratorShadedPoleFanMotorShaftThreaded

Description: The Manitowoc 2412929 Ice Machine Fan Motor 1/15HP 1550 RPM 60HZ 115V 0.9A provides reliable airflow to support efficient cooling performance in ice machines. This fan motor works by converting electrical energy into mechanical rotation, driving the fan at 1550 RPM to circulate air across condenser components. This airflow helps dissipate heat, allowing the system to maintain proper operating temperatures. Its 1/15 horsepower capacity and 115V compatibility support steady and consistent operation. By promoting effective heat exchange and reducing strain on the system, it helps improve overall efficiency and supports dependable ice production in commercial environments.

Category:

Tag: #Manitowoc #2412929 #IceMachineFanMotor

Description: The Henny Penny 16738 Fryer High Limit Temperature Control 450°F provides essential safety by preventing fryer oil from overheating beyond safe limits. This control works by continuously monitoring the oil temperature and automatically shutting off the heating system if it reaches the preset 450°F threshold. Once activated, it helps stop further heat buildup, protecting both the equipment and surrounding environment. Its reliable sensing mechanism supports consistent response under high-temperature conditions. By helping reduce the risk of overheating and potential damage, it contributes to safer operation and supports proper maintenance of fryer performance in commercial kitchen settings.

Category:

Tag: #HennyPenny #16738 #FryerHighLimitTemperatureControl

Description: The Southbend 1177452 Oven Motor W/ 2 Flats 1PH 7.2/4.5AMP CW provides reliable power for driving airflow and supporting consistent oven operation. This motor works by converting electrical energy into mechanical motion, rotating clockwise to operate a fan or blower that circulates heat evenly throughout the oven cavity. The two-flat shaft design helps ensure a secure connection to compatible components, supporting stable performance during use. Its 7.2/4.5 amp rating allows for dependable operation under typical conditions. By promoting even heat distribution and steady airflow, it helps improve cooking consistency and supports efficient performance in commercial oven equipment.

Category:

Tag: #Southbend #1177452 #OvenMotorFlats

Description: The Southbend 1175567 Oven Blower Motor W/ 2 Flats 7.2/4.5AMP 1PH CW provides reliable airflow to support even heat distribution in oven systems. This motor works by converting electrical energy into mechanical motion, rotating in a clockwise direction to drive a blower fan that circulates hot air throughout the oven cavity. Its dual flat shaft design helps ensure secure attachment to compatible components, while the 7.2/4.5 amp rating supports steady operation. By promoting consistent airflow, it helps reduce temperature variations and supports uniform cooking results. It serves as a practical replacement part for maintaining efficient and dependable oven performance. The Southbend 1175567 Oven Blower Motor W/ 2 Flats 7.2/4.5AMP 1PH CW provides reliable airflow to support even heat distribution in oven systems. This motor works by converting electrical energy into mechanical motion, rotating in a clockwise direction to drive a blower fan that circulates hot air throughout the oven cavity. Its dual flat shaft design helps ensure secure attachment to compatible components, while the 7.2/4.5 amp rating supports steady operation. By promoting consistent airflow, it helps reduce temperature variations and supports uniform cooking results. It serves as a practical replacement part for maintaining efficient and dependable oven performance.

Category:

Tag: #Southbend #1175567 #OvenBlowerMotor

Description: The Southbend 1175567 Oven Blower Motor W/ 2 Flats 7.2/4.5AMP 1PH CW provides reliable airflow to support even heat distribution in oven systems. This motor works by converting electrical energy into mechanical motion, rotating in a clockwise direction to drive a blower fan that circulates hot air throughout the oven cavity. Its dual flat shaft design helps ensure secure attachment to compatible components, while the 7.2/4.5 amp rating supports steady operation. By promoting consistent airflow, it helps reduce temperature variations and supports uniform cooking results. It serves as a practical replacement part for maintaining efficient and dependable oven performance.

Category:

Tag: #Southbend #1175567 #OvenBlowerMotor

Description: The Blodgett 61334 Combi Oven Hand Shower Complete provides a convenient solution for cleaning and rinsing combi oven interiors and surrounding areas. This hand shower works by connecting to a water supply and delivering a controlled spray through a handheld nozzle, allowing users to direct water precisely where needed. Its flexible design supports easy maneuvering for thorough cleaning of hard-to-reach surfaces inside the oven cavity. The steady water flow helps remove food residue and buildup efficiently. By simplifying cleaning tasks and improving hygiene, it supports proper maintenance and helps extend the overall usability of commercial oven equipment.

Category:

Tag: #Blodgett #61334 #CombiOvenHandShowerComplete

Description: The Turbochef CON-3010 Oven Controller provides precise control over oven functions to support consistent and efficient cooking performance. This controller acts as the central unit that manages temperature, timing, and operational settings by processing signals from sensors and coordinating heating elements and other components. It works by adjusting output based on user input and real-time conditions, helping maintain stable cooking environments. Its design supports smooth communication between different parts of the oven system. By enabling accurate control and reliable operation, it helps improve cooking consistency, reduce fluctuations, and supports proper functioning of commercial oven equipment.

Category:

Tag: #Turbochef #CON-3010 #OvenController

Description: The Middleby Marshall 75729 Oven Digital Temperature Controller provides accurate and consistent temperature regulation for reliable oven performance. This digital controller works by receiving input from temperature sensors and adjusting the heating system to maintain the set temperature. It processes data in real time, helping ensure stable cooking conditions throughout operation. The digital interface allows for precise adjustments and improved monitoring compared to manual controls. By maintaining consistent heat levels, it supports uniform cooking results and helps reduce temperature fluctuations. It serves as a practical component for maintaining efficient operation and dependable performance in commercial oven systems.

Category:

Tag: #MiddlebyMarshall #75729

Description: The Southbend 1184192 Range Burner Valve Knob 2-1/2" DIA provides a simple and effective way to control burner flame levels for precise cooking. This knob is designed to fit onto a compatible valve stem, allowing users to adjust gas flow by turning it to increase or decrease heat output. It works by rotating the internal valve mechanism, giving clear control over ignition and flame intensity. The 2-1/2-inch diameter offers a comfortable grip for smooth operation during use. By enabling accurate temperature adjustments and easy handling, it supports consistent cooking performance and serves as a practical replacement for worn or damaged control knobs.

Category:

Tag: #Southbend #1184192

Description: The TRUE 870838 Refrigerator Top Left Door Hinge Kit provides stable support and proper alignment for smooth refrigerator door operation. This hinge kit is designed to mount at the top left position, allowing the door to pivot open and close with controlled movement. It works by securely connecting the door to the cabinet while maintaining correct positioning to ensure an effective seal when closed. The components are built to handle repeated use in demanding environments. By supporting proper door alignment and reducing strain on the door structure, it helps maintain consistent internal temperatures and contributes to efficient refrigeration performance.

Category:

Tag: #TRUE #870838 #RefrigeratorTopLeftDoorHingeKit

Description: The Imperial 1091 Convection Oven Controller Cook & Hold provides precise control over cooking and holding functions to support consistent oven performance. This controller works by regulating temperature and timing, allowing the oven to cook food at a set level and then automatically shift to a lower holding temperature to maintain warmth without overcooking. It manages signals between sensors and heating components to maintain stable conditions throughout operation. The cook-and-hold functionality helps streamline kitchen workflows by reducing the need for constant monitoring. By supporting accurate temperature control and smooth transitions, it contributes to improved food quality and efficient use of oven equipment.

Category:

Tag: #Imperial #1091 #ConvectionOvenControllerCookHold

Description: The Atosa 301030006 Fryer 36" Thermopile 2-Lead 250-750 MV provides a reliable source of electrical power for gas control systems in fryer equipment. This thermopile works by converting heat from the pilot flame into millivolt electrical energy, generating between 250 and 750 millivolts to operate gas valves and safety controls. Its 36-inch length allows flexible installation and positioning within the fryer assembly. The two-lead design supports straightforward connection to compatible components. By supplying consistent low-voltage power without external electricity, it helps maintain safe and dependable operation, making it a practical component for maintenance, repair, or replacement in gas-powered fryer systems.

Category:

Tag: #Atosa #301030006 #FryerThermopile

Description: The Middleby Marshall 66186 Oven Gear Motor Kit W/Shafts 1/2" & 5/8" 53W 12.6 RPM 90 VDC provides controlled and consistent mechanical movement for conveyor or drive systems in ovens. This gear motor works by converting electrical energy into slow, steady rotational motion, operating at 12.6 RPM to drive connected components such as conveyor belts. The included shafts support compatibility with different configurations, allowing flexible installation. Its 53W power rating and 90 VDC operation help ensure stable and efficient performance. By delivering precise speed control and reliable motion, it supports consistent cooking processes and helps maintain smooth operation in commercial oven equipment.

Category:

Tag: #MiddlebyMarshall #66186 #OvenGearMotorKit

Description: The Garland 1686711 0.75/0.21HP 2-Speed Blower Motor 1725/1140 RPM 115V/1PH provides reliable airflow control for maintaining proper ventilation and heat distribution in equipment. This blower motor works by converting electrical energy into mechanical motion to drive a fan, circulating air through the system. Its two-speed capability allows operation at either 1725 or 1140 RPM, offering flexibility based on airflow requirements. Designed for 115V single-phase power, it supports consistent and efficient performance in compatible setups. By enabling controlled air movement, it helps maintain stable temperatures and supports proper equipment function, making it a practical choice for maintenance or replacement needs.

Category:

Tag: #Garland #686711 #SpeedBlowerMotor

Description: The Jade Range 2500126584 Range U-Shaped Burner Assembly provides consistent heat distribution for efficient cooking performance in commercial ranges. This burner assembly is designed to channel gas through its U-shaped structure, where it is ignited to produce an even flame pattern across the cooking surface. It works by allowing gas to flow through the burner ports, ensuring steady and uniform heat output. The design supports balanced heating, which helps improve cooking results and reduces hot spots. Its durable construction is suited for regular use in demanding environments. By maintaining reliable flame performance, it contributes to efficient operation and dependable cooking consistency.

Category:

Tag: #JadeRange #2500126584

Description: The Lang 40102-08 Oven Control Board provides precise control over oven functions to support consistent and reliable operation. This control board acts as the central component that manages electrical signals between the oven’s sensors, heating elements, and user interface. It works by processing input settings and regulating temperature, timing, and other functions to maintain the desired cooking conditions. Its design supports coordinated operation of multiple components, helping ensure smooth performance. By enabling accurate control and response, it helps improve cooking consistency and reduces the likelihood of operational issues, making it a practical replacement part for maintaining proper oven functionality.

Category:

Tag: #Lang #40102-08 #OvenControlBoard

Description: The Vulcan Hart 00-961739-000G1 1/2HP Oven Motor W/Cord Silver 115-120V provides reliable power for driving airflow and internal components in oven systems. This motor works by converting electrical energy into mechanical motion, typically operating a fan or blower to circulate hot air evenly throughout the oven cavity.

Category:

Tag: #VulcanHart #00-961739-000G1

Description: The Turbo Air M280909100 Door Gasket helps maintain a tight seal to keep cold air contained refrigeration units for consistent cooling performance. This gasket is designed to fit along the door edge, compressing against the cabinet frame when the door closes to prevent warm air from entering. It works by creating an airtight barrier that supports stable internal temperatures and reduces strain on the cooling system. The flexible material allows for proper alignment and repeated use without losing effectiveness. By improving insulation and minimizing air leaks, it helps enhance energy efficiency and supports proper food storage conditions in commercial refrigeration equipment.

Category:

Tag: #TurboAir #M280909100 #DoorGasket

Description: The TRUE 844950 Refrigerator Temperature Control Kit provides accurate temperature regulation to support consistent cooling performance in refrigeration units. This kit is designed to monitor internal temperature and control the compressor or cooling system by cycling it on and off as needed. It works by sensing temperature changes and adjusting operation to maintain the desired range. The components included in the kit help restore or maintain proper control functionality during repairs or replacements. By supporting stable temperatures, it helps protect stored items and improve energy efficiency. It serves as a practical solution for maintaining reliable operation in commercial refrigeration equipment.

Category:

Tag: #TRUE #844950 #RefrigeratorTemperatureControlKit

Description: The Component Hardware Group ACC-12X8 Hi-Temp Access Door 12" x 8" provides a convenient and heat-resistant entry point for accessing enclosed equipment or service areas. This access door is designed to be installed into panels or walls, allowing technicians to open and close it as needed for inspection, maintenance, or adjustments. It works by creating a secure yet accessible opening that can withstand elevated temperatures without compromising structural integrity. The compact 12" x 8" size fits a range of applications where space is limited. By enabling easy access while maintaining heat resistance, it helps support efficient servicing and protects surrounding components in high-temperature environments.

Category:

Tag: #ComponentHardwareGroup #ACC-12X8

Description: The Eliason K0195 Hinge Upper Assembly 90° Bearing Plate provides stable support and controlled movement for door systems requiring a fixed opening range. This upper hinge assembly works by connecting the door to the frame and allowing it to pivot smoothly up to a 90-degree angle, using the integrated bearing plate to reduce friction during operation. Its design helps maintain proper door alignment while supporting consistent opening and closing action. The durable construction is suited for frequent use in demanding environments. By ensuring reliable movement and limiting overextension, it contributes to improved door performance and helps reduce wear on related components.

Category:

Tag: #Eliason #K0195 #HingeUpperAssemblyBearingPlate

Description: The Winston Products PS1488 Paper Filter Envelope 100-Pack 16-3/4" x 22-1/4" provides an effective solution for filtering particles and maintaining cleaner cooking oil. These paper filter envelopes are designed to hold filter media or be used directly in filtration systems, allowing oil to pass through while trapping food debris and sediment. They work by creating a barrier that separates impurities from the oil during the filtration process, helping extend oil usability. The durable paper construction supports consistent flow while retaining particles. Supplied in a 100-pack, they offer convenience for regular maintenance. By promoting cleaner oil, they help improve cooking consistency and support efficient equipment operation.

Category:

Tag: #WinstonProducts #PS1488 #PaperFilterEnvelope

Description: The Component Hardware Group R35-1105-X Oven Mechanical Latch W/Strike 10-1/4" x 1-1/4" provides a secure closure to keep oven doors properly sealed during operation. This mechanical latch works by engaging with the included strike plate, locking the door firmly in place when closed and releasing it when the handle is operated. Its design helps maintain consistent door alignment and prevents unintended opening during use. The sturdy construction supports durability under frequent operation in demanding environments. By helping ensure a tight seal, it contributes to stable internal temperatures and efficient performance, making it a practical replacement part for maintaining reliable oven functionality.

Category:

Tag: #ComponentHardware #R35-1105-X

Description: The White Rodgers 36H22-418 Gas Valve 3.5 WC 3/4" NPT provides controlled gas flow for safe and consistent operation in heating and cooking equipment. This gas valve works by regulating the passage of gas through the system, opening and closing in response to control signals to maintain the required pressure level of 3.5 inches water column. Its 3/4-inch NPT connection supports secure installation with compatible fittings. The design helps ensure steady gas delivery to burners, promoting efficient performance. By supporting accurate flow control and reliable shutoff when needed, it contributes to safer operation and helps maintain proper functionality in gas-powered systems.

Category:

Tag: #WhiteRodgers #36H22-418 #GasValve

Description: The Continental Refrigerator CRC20208OLD Right Hinge Assembly provides stable support and smooth operation for refrigerator doors. This hinge assembly is designed to mount on the right side of the unit, allowing the door to open and close with proper alignment and controlled movement. It works by securely connecting the door to the cabinet while enabling consistent pivoting during use. Its sturdy construction helps maintain door positioning and reduces strain on the door structure over time. By supporting proper sealing and alignment, it contributes to maintaining internal temperatures and efficient operation, making it a practical replacement component for routine maintenance or repair needs.

Category:

Tag: #ContinentalRefrigerator #CRC20208OLD

Description: The Avantco 177400046 Hi-Limit Thermostat, 450°F, Cap 30" provides critical safety protection by preventing equipment from overheating. This thermostat works by monitoring temperature levels and automatically shutting off the system when temperatures exceed the preset 450°F limit. Once conditions return to a safe range, it allows normal operation to resume or be reset, depending on the setup. The 30-inch capillary tube enables flexible placement for accurate temperature sensing within the unit. By helping prevent excessive heat buildup, it reduces the risk of damage to components and supports safer operation. It serves as a practical replacement part for maintaining reliable performance in commercial heating equipment.

Category:

Tag: #Avantco #177400046 #ThermostatCap

Description: The Frymaster 8060184 Fryer Operating Thermostat helps maintain accurate oil temperature for consistent and controlled cooking performance. This thermostat works by sensing the fryer oil temperature and regulating the heating element or burner to keep it within the desired range. When the temperature drops, it signals the system to reheat, and when the set level is reached, it limits further heating to prevent overheating. This controlled cycling supports stable cooking conditions and helps protect equipment from excessive heat. By maintaining proper temperature levels, it contributes to better food quality, improved energy efficiency, and more reliable fryer operation in commercial kitchen environments.

Category:

Tag: #Frymaster #8060184 #FryerOperatingThermostat

Description: The Duke 153093K Oven Blower Wheel W/ Puller Hub, 9-7/8" x 2-1/8" CCW helps maintain consistent airflow for even heat distribution inside oven systems. This blower wheel works by rotating counterclockwise to draw in and circulate air throughout the oven cavity, supporting uniform cooking temperatures. The included puller hub assists with easier installation and removal during maintenance or replacement. Its balanced design promotes stable operation while reducing vibration during use. By ensuring proper air movement, it helps improve cooking consistency and overall equipment efficiency. It serves as a practical replacement component for maintaining reliable performance in commercial oven applications.

Category:

Tag: #Duke #153093K #OvenBlowerWheelwithPullerHub

Description: The Frymaster 8261712 BALDOR Fryer Oil Pump Motor W/ Gasket 115V 115 VAC provides reliable power for circulating fryer oil during filtration and maintenance processes. This motor works by converting electrical energy into mechanical motion, driving the pump to move oil through the system for cleaning or reuse. The included gasket helps support a secure seal, reducing the risk of leaks during operation. Designed for 115V systems, it supports consistent performance in compatible fryer setups. By enabling efficient oil movement and supporting proper filtration, it helps maintain oil quality, improve equipment operation, and simplify routine maintenance tasks in commercial kitchen environments.

Category:

Tag: #Frymaster #8261712 #BALDORFryerOilPumpMotorGasket

Description: The Allpoints 381311 12 AWG High-Temp Black Wire, 50ft, 600V, 392°F provides a reliable solution for transmitting electrical current in moderately high-temperature environments. This wire is designed to carry power between components while maintaining stable conductivity under heat exposure up to 392°F. Its insulated coating helps protect against temperature-related damage, reducing the risk of short circuits and wear during operation. The 12 AWG thickness supports efficient current handling, while the 600V rating ensures compatibility with various equipment applications. With a 50-foot length for flexible installation, it offers a practical option for maintenance, repairs, or setups requiring durable and heat-resistant wiring.

Category:

Tag: #Allpoints #381311 #AWGHighTempBlackWire

Description: The Allpoints 8407212 Fryer Bleed Valve provides a controlled way to release air or excess pressure from fryer systems, supporting safe and efficient operation. This valve works by allowing trapped air or fluid to be gradually discharged when opened, helping maintain proper internal pressure and flow within the fryer. Its design enables precise control during maintenance or system adjustments, reducing the risk of pressure buildup that could affect performance. The durable construction supports consistent operation in high-temperature environments. By helping regulate pressure and improve system stability, it serves as a practical component for maintaining fryer efficiency and supporting routine servicing needs.

Category:

Tag: #Allpoints #8407212 #FryerBleedValve

Description: The Allpoints 381297 14G High-Temp Wire, 50ft, 600V, 842°F provides a dependable solution for carrying electrical current in high-heat environments. This wire is designed to transmit power between components while maintaining stable performance under elevated temperatures up to 842°F. Its durable insulation helps protect against heat damage, reducing the risk of shorts or premature wear during operation. The 14-gauge thickness supports efficient current flow, while the 600V rating ensures compatibility with a range of equipment. With a 50-foot length for flexible installation, it offers a practical option for maintenance, repairs, or setups requiring reliable and heat-resistant electrical wiring.

Category:

Tag: #Allpoints #381297 #HighTempWire

Description: The Beverage Air 703-963D-03 NEW STYLE Refrigerator Door Gasket 21 1/8" x 23" helps maintain an effective seal to keep cold air inside refrigeration units. This door gasket is designed to fit around the door frame, creating a tight barrier when the door is closed. It works by compressing against the cabinet surface, preventing warm air from entering and reducing temperature fluctuations inside the unit. The flexible material allows for a secure fit while accommodating regular door movement. By supporting consistent internal temperatures and reducing energy loss, it contributes to efficient operation and helps preserve stored items, making it a practical replacement for worn or damaged gaskets.

Category:

Tag: #BeverageAir #703-963D-03NEWSTYLE #RefrigeratorDoorGasket

Description: The Bakers Pride 2E-P1118A Fast Acting Fuse, 600V, 10 AMP, 13/32" x 1-1/2" provides essential protection by quickly interrupting electrical circuits during overloads or short circuits. This fuse works by allowing current to pass under normal conditions, but when the current exceeds safe limits, the internal element melts almost instantly to break the circuit and prevent damage. Its fast-acting design helps protect sensitive components from sudden electrical spikes. Rated for 600V and 10 amps, it supports reliable performance in compatible equipment. With its compact size and responsive operation, it serves as a practical safety component for maintaining electrical system integrity and reducing the risk of equipment failure.

Category:

Tag: #BakersPride #2E-P1118A #FastActingFuse

Description: The Imperial 37001-24 Stainless Steel Flex Tube Kit W/Breakaway Fitting 3/16" provides a secure and adaptable solution for connecting gas or fluid lines in equipment setups. This flexible stainless steel tube allows for safe transfer of gas or liquids while accommodating movement or slight misalignment between components. It works by maintaining a continuous flow through its durable tubing, while the integrated breakaway fitting is designed to disconnect under excessive force, helping reduce the risk of damage or leaks. The 3/16-inch size supports compatibility with specific applications. With its corrosion-resistant construction and added safety feature, it offers a practical option for reliable installation and maintenance tasks.

Category:

Tag: #Imperial #37001-24 #StainlessSteelFlexTubeKitBreakawayFitting

Description: The Dormont T4-KIT-18 Flexible Tube Kit Stainless Steel 1/4" OD x 18" Long provides a durable and flexible connection solution for gas or fluid transfer in compatible systems. This stainless steel tube is designed to safely carry gas or liquids between components while accommodating slight movement or alignment variations during installation. Its flexible construction allows it to bend without kinking, making it suitable for tight or confined spaces. The 1/4-inch outer diameter and 18-inch length support precise fitting in specific setups. With its corrosion-resistant material and secure connectivity, it helps maintain consistent flow and simplifies maintenance or replacement tasks in commercial and service applications.

Category:

Tag: #Dormont #4-KIT-18 #FlexibleTubeKitStainlessSteel

Description: The Allpoints 511339 Repair Kit W/3/4" NPT for Vacuum Breaker provides a practical solution for restoring the proper function of vacuum breaker assemblies in plumbing systems. This kit includes essential components used to repair worn or damaged parts, helping the vacuum breaker maintain its role in preventing backflow and contamination. It works by replacing internal elements that control air intake and water flow, ensuring the device can effectively break siphon action when needed. The 3/4-inch NPT compatibility supports straightforward installation with standard fittings. By helping maintain system integrity and compliance, it supports safer operation and extends the service existing equipment.

Category:

Tag: #Allpoints #511339 #RepairKitNPTforVacuumBreaker

Description: The Jackson 05945-002-47-74 Dishwasher 3-Pole Relay 50/60Hz 240V ensures controlled electrical switching for reliable dishwasher operation. This relay functions by using an electromagnetic mechanism to open or close three electrical circuits simultaneously when voltage is applied, helping manage power distribution to key components. Designed for 240V systems and compatible with both 50 and 60Hz frequencies, it supports consistent performance in commercial dishwashing equipment. Its multi-pole design allows coordinated control of multiple connections, improving operational efficiency. By enabling stable switching and reducing electrical strain on components, it serves as a practical replacement part for maintaining proper function and extending equipment service .

Category:

Tag: #Jackson #05945-002-47-74 #DishwasherPoleRelay

Description: The Allpoints 721100 Tapered Broach for Cleaning Pilot Orifice provides a precise solution for clearing blockages and maintaining proper gas flow in pilot assemblies. This tool is designed with a tapered shape that allows it to gently enter and clean the pilot orifice by removing debris, buildup, or obstructions without enlarging the opening. It works by carefully inserting and rotating the broach to restore the original passage size, helping ensure consistent ignition performance. Its simple design supports controlled handling and reduces the risk of damage to sensitive components. By maintaining a clean orifice, it helps improve efficiency and reliability in gas-powered equipment.

Category:

Tag: #Allpoints #721100 #TaperedBroachforCleaningPilotOrifice

Description: The AllPoints 721017 Gauging Drill Bit Set provides a precise and organized solution for measuring and drilling accurate hole sizes in various maintenance and repair tasks. This set includes multiple drill bits designed to create or verify specific hole diameters by matching the correct size to the application. It works by allowing users to select the appropriate bit for drilling or gauging openings, ensuring proper fit for components such as orifices or fasteners. The clearly sized bits help improve accuracy and reduce guesswork during use. With its practical assortment and reliable construction, it supports consistent results and efficient workflow in technical and service environments.

Category:

Tag: #Allpoints #721017 #GaugingDrillBitSet

Description: The Allpoints 2802261 Sauce Gun 1 OZ provides a precise and controlled way to dispense small portions of sauces and condiments. This handheld tool works by holding up to one ounce of liquid and releasing it through a trigger mechanism, allowing for accurate application onto food or preparation surfaces. Its compact design supports easy handling and helps reduce waste by dispensing measured amounts. The controlled flow improves consistency in food presentation and portioning, which can be useful in commercial kitchens or food preparation settings. With its simple operation and manageable size, it serves as a practical tool for efficient and tidy sauce application tasks.

Category:

Tag: #Allpoints #2802261 #SauceGun

Description: The Allpoints 2802078 Waffle Grid Conditioner Spray 8-Fluid Ounces helps maintain waffle irons by conditioning grid surfaces for smoother operation and easier food release. This spray works by forming a light protective coating on the waffle grid, reducing sticking and buildup during cooking. It also helps protect the surface from residue accumulation, making cleaning more manageable after use. The formulation supports consistent cooking performance by promoting even contact between batter and the grid. Packaged in an easy-to-use 8-ounce spray format, it allows for controlled application without excess. It serves as a practical maintenance product for extending the usability and cleanliness of waffle-making equipment.

Category:

Tag: #Allpoints #2802078 #WaffleGridConditionerSprayFluidounces

Description: The Allpoints 2531409 Hi-Temperature Wire, 600VAC, 10 AWG provides a reliable solution for carrying electrical current in high-heat environments. This wire is designed to transmit power efficiently between components while maintaining stable performance under demanding temperature conditions. Its durable insulation helps protect against heat damage, reducing the risk of wear, short circuits, or electrical failure during operation. Rated for up to 600VAC, it supports consistent conductivity in compatible systems. The 10 AWG thickness allows for effective current handling in various applications. With its heat resistance and sturdy construction, it serves as a practical choice for maintenance, repairs, or installations requiring dependable electrical wiring.

Category:

Tag: #Allpoints #2531409 #TemperatureWireAWG

Description: The Allpoints 851162 Orange Ignition Wire Kit 250°C provides a dependable solution for transmitting electrical current in high-temperature ignition systems. This wire kit is designed to carry voltage from the ignition source to the burner or pilot, enabling consistent and reliable spark generation. Its heat-resistant insulation is rated up to 250°C, helping protect the wire from damage in demanding environments. The flexible construction allows for easier routing during installation while maintaining secure connections. By supporting stable ignition performance and reducing the risk of heat-related wear, it serves as a practical option for maintenance, repairs, or replacements in commercial and industrial equipment.

Category:

Tag: #Allpoints #851162 #OrangeIgnitionWireKit

Description: The Allpoints 851098 13.4 oz Food Grade White Grease, NSF Certified provides safe and effective lubrication for equipment used in food-related environments. This grease is formulated to reduce friction between moving parts by creating a protective barrier that minimizes wear and helps maintain smooth operation. Its food-grade composition meets NSF standards, making it suitable for incidental contact areas where safety is important. The thick, stable consistency allows it to stay in place under normal operating conditions, supporting longer-lasting lubrication. By helping prevent corrosion and reducing component stress, it contributes to improved equipment reliability and simplified maintenance in commercial kitchens and food processing settings.

Category:

Tag: #Allpoints #851098 #FoodGradeWhiteGreaseNSFCertified

Description: The Allpoints 851031 Vinyl Insulated Butt Connectors W/Terminals, 10-12 AWG, 100/pack provide a reliable way to join electrical wires securely and efficiently. These connectors work by inserting stripped wire ends into each side and crimping them in place, creating a stable and continuous electrical connection. The vinyl insulation helps protect against moisture, abrasion, and accidental contact, supporting safer operation. Designed for 10–12 AWG wires, they offer compatibility with common wiring sizes used in various applications. The insulated covering also assists in reducing the risk of short circuits. Packaged in a 100-count pack, they are suitable for routine maintenance, repairs, and installation tasks requiring consistent wire connections.

Category:

Tag: #Allpoints #851031 #VinylInsulatedButtConnectorsTerminals

Description: The Allpoints 851022 Ring Terminal Box 100 provides a dependable solution for creating secure and stable electrical connections in wiring applications. This set includes ring terminals designed to be crimped onto the end of a wire, allowing it to be fastened firmly to a stud or screw connection. By forming a tight and consistent contact point, it helps ensure reliable conductivity and reduces the risk of loose or disconnected wires. The ring design keeps the connection in place even in environments with vibration or movement. Packaged in a box of 100, it offers convenience for ongoing maintenance, repairs, or installation tasks requiring consistent and organized electrical connections.

Category:

Tag: #Allpoints #851022 #RingTerminalBox

Description: The Allpoints 721185 Pilot Puffer provides a simple and effective way to clean pilot assemblies and remove debris that can affect ignition performance. This handheld tool works by directing a controlled burst of air toward the pilot area, helping clear dust, dirt, or blockages without the need for disassembly. Its compact design allows for easy handling and precise targeting in tight or hard-to-reach spaces. By keeping the pilot opening clean, it supports more consistent ignition and reduces the likelihood of operational issues. It serves as a practical maintenance tool for routine servicing, helping improve efficiency and extend the reliability of gas-powered equipment.

Category:

Tag: #Allpoints #721185 #PilotPuffer

Description: The Allpoints 721153 Fan Blade Puller, 5/8" Steel, 4 Fingers provides a reliable way to safely remove fan blades without causing damage to the shaft or surrounding components. This tool works by securing its four fingers evenly around the fan blade hub while applying controlled force to pull the blade away from the motor shaft. Its 5/8-inch steel construction offers strength and stability during use, helping maintain proper alignment throughout the removal process. The balanced design reduces the risk of bending or misalignment, making maintenance tasks more efficient. It serves as a practical tool for technicians handling repairs, replacements, or routine servicing of fan assemblies.

Category:

Tag: #Allpoints #721153 #FanBladePuller

Description: The Allpoints 261421 50Ft. Roll Aluminum Tubing 3/8" DIA. OD. Natural or LP Gas provides a practical solution for safely routing gas in compatible systems. This aluminum tubing is designed to carry natural or LP gas through its 3/8-inch outer diameter, supporting controlled and consistent flow between connected components. Its flexible construction allows it to be bent and installed in tight or complex layouts with minimal effort. The corrosion-resistant material helps maintain durability over time, while the 50-foot roll offers sufficient length for extended runs or multiple installations. It serves as a useful option for maintenance, repairs, or new setups requiring dependable gas flow management.

Category:

Tag: #Allpoints #261421 #RollAluminumTubingForNaturalorLPGas

Description: The Allpoints 261420 50 FT Aluminum Tubing, 5/16" OD provides a flexible and reliable pathway for transporting air, liquids, or compatible gases in various applications. This aluminum tubing functions by allowing controlled flow through its 5/16-inch outer diameter, helping maintain consistent movement within connected systems. Its lightweight and bendable design makes it easy to cut, shape, and install in tight or complex layouts without specialized equipment. The corrosion-resistant material supports durability in different environments, while the 50-foot length offers convenience for extended runs or multiple projects. It serves as a practical option for maintenance, repair, or custom installations requiring adaptable and steady flow performance.

Category:

Tag: #Allpoints #261420 #AluminumTubing

Description: The Allpoints 261417 Aluminum Tube 50Ft Roll 1/8" offers a flexible and efficient solution for routing fluids or gases in light-duty applications. This aluminum tubing is designed to guide the flow of air, water, or other compatible substances through its narrow 1/8-inch diameter, helping maintain controlled movement within a system. Its lightweight and bendable construction allows for easy shaping and installation around corners or confined spaces without the need for complex tools. The continuous 50-foot roll provides ample length for multiple uses or custom setups. With its corrosion-resistant properties and adaptability, it supports reliable performance while simplifying installation and maintenance tasks.

Category:

Tag: #Allpoints #261417 #AluminumTubeRoll

Description: The Allpoints 381310 50 ft silicone rubber insulated wire roll is designed to carry electrical current between components while withstanding elevated heat conditions commonly found in commercial appliances. It works by using a conductive metal core to transmit power, while the silicone rubber insulation protects the wire from heat, moisture, and electrical contact with surrounding parts. Rated for temperatures up to 392°F and 600 volts, it supports safe and stable electrical performance. The flexible construction also helps simplify routing and installation during equipment repairs or assembly. The Allpoints 381310 wire roll helps support dependable wiring, improved durability, and consistent operation in demanding commercial settings.

Category:

Tag: #Allpoints #381310 #SiliconeRubberInsulatedWireRoll

Description: The Allpoints 263216 fixture with globe and guard is designed to house a light bulb within a protective globe while a surrounding guard helps shield the bulb from accidental contact or impact. It works by allowing the bulb to emit light through the globe, which helps distribute illumination evenly, while the guard adds an extra layer of protection in active environments. This design helps maintain consistent lighting while reducing the risk of bulb damage. The Allpoints 263216 fixture supports safe, reliable lighting and is suitable for commercial kitchens, utility spaces, and equipment areas where dependable visibility is important.

Category:

Tag: #Allpoints #263216

Description: The Allpoints 262716 48" stainless steel door sweep mounting strip is designed to hold a door sweep firmly along the bottom of a door. It works by using oval slots that allow slight adjustment during installation, helping align the sweep for proper contact with the floor surface. The included cap screws help fasten the strip securely to the door, keeping the sweep stable during regular use. The stainless steel construction supports durability in high-traffic environments. The Allpoints 262716 mounting strip helps improve door sealing, reduce drafts, and support better temperature control in commercial spaces.

Category:

Tag: #Allpoints #262716

Description: The Allpoints 881300 3-in-1 relay overload combination is an electrical component designed to assist in starting and safeguarding compressor motors in compatible refrigeration equipment. It works by combining a start relay, start capacitor, and overload protector into a single unit that helps deliver the necessary boost for the compressor to start while monitoring electrical conditions. If excessive current or overheating occurs, the overload feature interrupts power to help protect the motor. This integrated design helps simplify installation and maintenance. The Allpoints 881300 supports stable compressor operation, helps prevent electrical damage, and contributes to dependable refrigeration performance.

Category:

Tag: #Allpoints #881300 #RelayOverloadCombination

Description: The Allpoints 341085 5000W 3-phase immersion heater with cutout is designed to heat water or other liquids by being directly submerged in the tank or container. It works by converting electrical energy into heat through its internal heating element, transferring that heat directly to the surrounding liquid for fast and consistent temperature rise. The built-in cutout helps protect the system by interrupting power if unsafe temperature conditions occur. This design supports reliable temperature control and safe operation during use. The Allpoints 341085 immersion heater helps maintain consistent heating performance and supports efficient operation in demanding foodservice and commercial environments.

Category:

Tag: #Allpoints #341085

Description: The Allpoints 321885 fryer hose measures 5 feet in length with a 1/2" diameter and is designed to handle the movement of hot liquids commonly used in fryer systems. It works by creating a secure and flexible pathway between the fryer and connected plumbing or filtration equipment, allowing grease or hot water to flow through the hose during draining or cleaning processes. Its flexible construction supports easier installation and maneuverability around kitchen equipment. The Allpoints 321885 fryer hose helps support safe liquid handling, reliable operation, and efficient maintenance procedures in busy foodservice environments.

Category:

Tag: #Allpoints #321885 #FryerHoseforGreaseHotWater

Description: The Pitco 60203003 fryer millivolt system gas valve is designed to regulate the supply of gas to the fryer burner in compatible commercial frying equipment. It operates using a millivolt signal generated by the pilot thermopile, which allows the valve to open and deliver gas when the pilot flame is present and stable. This mechanism helps ensure that gas flows only under proper operating conditions. By maintaining controlled gas delivery, the valve supports steady burner performance and proper heating. Designed for dependable use in busy kitchens, the Pitco 60203003 gas valve helps maintain safe operation and consistent cooking performance.

Category:

Tag: #Pitco #60203003 #FryerMillivoltSystemGasValve

Description: The Imperial 0513-1 oven hot top valve is designed to manage the supply of gas to the burner, allowing operators to adjust and maintain the desired heat level during cooking. It features 1/4" CCT pilot fittings that support a stable pilot connection for reliable burner ignition. The valve works by opening, closing, or adjusting the gas flow as the control is turned, helping maintain consistent burner performance. This controlled regulation supports stable heating and efficient operation. Suitable for commercial kitchen equipment, the Imperial 0513-1 valve helps maintain dependable heat control and reliable day-to-day performance.

Category:

Tag: #Imperial #0513-1 #OvenHotTopValvePilotFittings

Description: The Imperial 1095-16 pilot burner is designed for propane systems and features a 1/4" tube connection for proper gas flow to the pilot assembly. It works by directing a controlled amount of propane to the burner tip, where it creates a small continuous flame. This flame serves as the ignition source for the main burner when the appliance is activated. Maintaining a consistent pilot flame helps ensure dependable startup and stable burner performance. Suitable for commercial kitchen equipment, the Imperial 1095-16 pilot burner supports efficient ignition, consistent heating operation, and reliable performance in everyday use.

Category:

Tag: #Imperial #1095-16 #PilotBurnerPropaneGasTube

Description: The Imperial 1291 cheesemelter pilot assembly is designed for natural gas systems and helps ignite the main burner when heat is required. It works by delivering a controlled flow of gas to a small pilot burner, where the flame remains continuously lit. This pilot flame then ignites the main burner when the unit is activated, supporting consistent heating during operation. Proper pilot function helps maintain stable burner performance and supports safe equipment startup. Designed for dependable use in commercial kitchens, the Imperial 1291 pilot assembly helps maintain efficient operation and reliable heating performance.

Category:

Tag: #Imperial #1291 #CheesemelterPilotAssemblyNaturalGas

Description: The Hatco 02.04.500.00 booster element is designed to increase the temperature of rinse water within a dishwasher booster heater. It works by converting electrical energy into heat as water passes around the element, allowing the system to reach the high temperatures required for proper sanitizing during the final rinse cycle. The design includes a 2-1/2" square flange and 1-3/4" on-center bolt holes for secure installation in compatible units. This consistent heating process helps maintain sanitation standards, improve wash cycle efficiency, and support reliable dishwashing performance in busy foodservice environments.

Category:

Tag: #Hatco #02.04.500.00 #SQFlangeBoosterElementOCBoltHoles

Description: The Hatco R02.04.450.00 dishwasher booster element is a heating component designed to raise the temperature of rinse water as it passes through the booster heater. It works by converting electrical energy into heat, allowing the water to reach the high temperatures required for sanitizing dishes and utensils during the final rinse cycle. Featuring 1-3/4" on-center bolt holes and a 2-1/2" square flange, it allows secure installation in compatible systems. This controlled heating process helps maintain sanitation standards, improve washing efficiency, and support dependable dishwashing performance in demanding foodservice environments

Category:

Tag: #Hatco #R02.04.450.00 #DishwasherBoosterElementBoltHolesSQFlange

Description: The Hatco 02.04.450.00 dishwasher booster element is designed to raise and maintain the temperature of rinse water used during the sanitizing cycle. It works by converting electrical energy into heat, warming the water as it passes through the booster heater to reach the required temperature for effective dish sanitation. The unit features 1-3/4" on-center bolt holes and a 2-1/2" square flange for secure installation within compatible systems. This controlled heating process helps support consistent sanitation performance, improve washing efficiency, and maintain dependable operation in busy commercial kitchen dishwashing environments.

Category:

Tag: #Hatco #02.04.450.00 #DishwasherBoosterElementBoltHolesSQFlange

Description: The Hatco 02.08.014D.00 heating element is a 1050W, 208V component designed to produce and distribute heat within compatible food warmers. It works by converting electrical energy into radiant heat, which spreads across the warming area and helps maintain food at appropriate serving temperatures. This steady heat output helps reduce temperature fluctuations and supports even heat distribution during operation. Suitable for demanding kitchen environments, the Hatco 02.08.014D.00 heating element assists in maintaining food quality, supports efficient warming performance, and contributes to reliable day-to-day operation of commercial warming equipment.

Category:

Tag: #Hatco #02.08.014D.00 #HeatingElement

Description: The Hatco 02.08.011D.00 warmer element is a 48-inch heating component rated at 800W and 208V, designed for use in compatible commercial food warmers. It works by converting electrical energy into radiant heat, which spreads evenly across the warming surface to keep prepared foods at safe serving temperatures. This steady heat output helps minimize temperature fluctuations and supports uniform warming across the unit. Built for reliable operation in busy kitchen environments, the Hatco 02.08.011D.00 warmer element helps maintain food quality, improve holding efficiency, and support dependable day-to-day equipment performance.

Category:

Tag: #Hatco #02.08.011D.00 #WarmerElement

Description: The Hatco 02.08.120D.00 warmer element is a 208V, 2050W heating component designed to generate and distribute heat within compatible food warmers. It works by converting electrical energy into radiant heat, which warms the interior surfaces of the unit and helps keep food at safe serving temperatures. This steady heat output supports even warming and helps reduce temperature fluctuations during operation. Designed for reliable performance in demanding kitchen environments, the Hatco 02.08.120D.00 warmer element helps maintain efficient equipment operation, supports consistent food quality, and assists with dependable day-to-day warming performance.

Category:

Tag: #Hatco #02.08.120D.00 #WarmerElement

Description: The Globe MCR75 slicing machine relay is an electrical control component rated for 8A at 250V, designed to manage the flow of power within compatible slicers. It works by opening or closing an electrical circuit when activated, allowing the relay to control the supply of power to specific components such as the motor. This switching action helps regulate electrical load and supports safe equipment operation. Built for dependable performance, the Globe MCR75 slicing machine relay helps maintain consistent functionality, supports system protection, and contributes to smooth and reliable performance in commercial food preparation environments.

Category:

Tag: #Globe #MCR75 #SlicingMachineRelay

Description: The Edlund G004SP #2 parts kit includes a gear, cutting knife, and two screws designed for use with compatible manual can openers. It works by allowing the gear to rotate as the handle is turned, which drives the knife along the rim of the can to cut the lid cleanly. The screws secure the components in place to ensure stable alignment during operation. This coordinated action supports reliable cutting performance and consistent results during food preparation. Designed for routine maintenance, the Edlund G004SP #2 parts kit helps extend equipment life and maintain dependable operation in busy commercial kitchen environments.

Category:

Tag: #Edlund #G004SP #PartsKitGearKnifeandScrew

Description: The Edlund G004M #2 parts kit includes a replacement gear, cutting knife, and two screws designed to maintain the proper function of can opening equipment. The gear drives the cutting knife as the handle is turned, allowing the blade to move smoothly along the rim of the can and cut through the lid. The included screws secure the components in place to support stable operation. This coordinated mechanism ensures efficient and consistent can opening during food preparation tasks. Suitable for routine maintenance, the Edlund G004M #2 parts kit helps extend equipment lifespan and maintain dependable performance in commercial kitchen environments.

Category:

Tag: #Edlund #G004M #PartsKitGearKnifeandScrew

Description: The Edlund G004 #2 parts kit includes essential replacement components such as a gear, cutting knife, and two screws designed to maintain proper cutting performance. These parts work together as the gear turns and drives the knife along the edge of the can, allowing it to cut through the lid smoothly while the screws secure the components in place. This coordinated movement helps ensure clean and efficient can opening during food preparation. Designed for routine maintenance and repair, the Edlund G004 #2 parts kit helps extend equipment life, maintain consistent cutting performance, and support dependable operation in busy commercial kitchen environments.

Category:

Tag: #Edlund #G004 #PartsKitGearKnifeandScrew

Description: The Duke 600541 oven 3 heat switch is a rotary control switch designed to regulate heating output through three selectable heat settings. It features six terminals, a D stem shaft, and a .150" flat-down configuration for proper knob alignment and secure installation. The switch works by directing electrical current to different heating circuits as the knob is turned, allowing operators to select the desired heat level for various cooking tasks. This controlled switching helps maintain appropriate temperature output during operation. Designed for dependable performance in commercial kitchens, the Duke 600541 heat switch supports reliable temperature management and contributes to consistent oven functionality.

Category:

Tag: #Duke #600541 #OvenHeatSwitchRotarySwitch

Description: The Dormont A50R Snap-Fast Quick Disconnect features 1/2" inlet and outlet connections designed for use with compatible gas appliances in commercial kitchens. It works through a snap-fast coupling mechanism that allows operators to quickly connect or disconnect the gas supply without the need for tools. When disconnected, an internal shut-off valve automatically stops gas flow, helping prevent leaks and improving safety. This design supports convenient equipment maintenance and repositioning during cleaning or service. Built for reliable operation, it helps streamline workflow while maintaining secure gas connections in busy foodservice environments.

Category:

Tag: #Dormont #A50R #SnapFastQuickDisconnect

Description: The Dormont R48P42-0512-10 pressure regulator is designed for LP gas systems and features a 3/4" connection for reliable integration with compatible equipment. It works by reducing and stabilizing the incoming gas pressure before it reaches the appliance, ensuring the burners receive a controlled and consistent gas supply. An internal diaphragm adjusts automatically to fluctuations in inlet pressure, helping maintain balanced output during operation. This regulation helps protect internal components, supports efficient combustion, and reduces the risk of pressure-related issues. Suitable for commercial kitchen environments, it contributes to dependable gas flow and stable equipment performance.

Category:

Tag: #Dormont #R48P42-0512-10

Description: The Dormont R48N42-0306-3.5 pressure regulator is designed for natural gas systems and features a 3/4" FPT connection with a 1/2 PSI inlet pressure rating. It works by controlling and reducing incoming gas pressure to a steady level before it reaches the appliance, helping ensure proper burner operation. An internal diaphragm automatically adjusts the gas flow based on demand, maintaining balanced pressure during use. This controlled regulation helps protect equipment components, support efficient combustion, and reduce pressure fluctuations. Suitable for commercial kitchen applications, it contributes to reliable gas system operation and consistent cooking performance.

Category:

Tag: #Dormont #R48N42-0306-3.5

Description: The Blodgett BL32291 oven blower motor is a 100–115V, 1/2HP single-phase motor designed to drive the oven’s blower fan and move hot air throughout the cooking chamber. It works by powering the fan assembly, which circulates heated air evenly around food, helping maintain consistent internal temperatures during operation. This airflow reduces hot and cold spots and supports more uniform cooking results. Built for dependable performance in demanding kitchen environments, the Blodgett BL32291 blower motor helps improve temperature stability, enhance cooking efficiency, and contribute to smooth and reliable oven operation.

Category:

Tag: #Blodgett #BL32291 #OvenBlowerMotor

Description: The Blodgett BL18227 oven temperature control board is an electronic component designed to manage and maintain oven temperatures within a 200–500°F range. It works by receiving input from the oven’s temperature sensor and adjusting the heating system accordingly to maintain the selected setting. By controlling the power supplied to heating elements or gas components, it helps keep internal temperatures stable during operation. This process supports even cooking results and helps prevent overheating. Designed for reliable use in commercial kitchen environments, the Blodgett BL18227 temperature control board helps improve operational consistency, supports proper temperature management, and contributes to dependable oven performance.

Category:

Tag: #Blodgett #BL18227 #OvenTemperatureControlBoard

Description: The Beverage Air 203-150D cap tube is a precision-sized component with a .049" inside diameter and 108" length, designed to control the amount of refrigerant entering the evaporator. It works by creating a pressure drop as refrigerant passes through the narrow tube, allowing the refrigerant to expand and absorb heat effectively within the evaporator coil. This controlled flow helps maintain proper cooling cycles and consistent cabinet temperatures. Built for use in compatible refrigeration equipment, the Beverage Air 203-150D cap tube helps support efficient system operation, improve temperature stability, and contribute to reliable long-term cooling performance.

Category:

Tag: #BeverageAir #203-150D #CapTube

Description: The Beverage Air 63C31001A refrigerator evaporator fan motor assembly includes the motor, fan blade, and mounting bracket designed to circulate air across the evaporator coil and throughout the refrigerator interior. It works by drawing air over the cold evaporator coil and distributing the cooled air evenly within the cabinet. This circulation helps maintain stable temperatures and reduces the chance of warm spots inside the unit. The complete assembly design allows for easier installation and dependable operation. By promoting uniform airflow, it helps improve cooling efficiency, support food safety, and maintain reliable refrigeration performance in commercial kitchen environments.

Category:

Tag: #BeverageAir #63C31001A

Description: The Bakers Pride R3229A char broiler gas valve is designed to regulate burner output with simple OFF, HI, and LO settings, allowing operators to adjust heat levels based on cooking needs. It works by controlling the amount of gas delivered to the burner when the valve is turned, enabling smooth transitions between different heat intensities. This helps maintain steady cooking temperatures for grilling and broiling tasks. Built for use in commercial kitchen environments, the Bakers Pride R3229A gas valve supports reliable operation, improves heat control, and contributes to efficient equipment performance during daily food preparation.

Category:

Tag: #BakersPride #R3229A #CharBroilersGasValve

Description: The Bakers Pride M1557A oven gas safety valve TS11 is designed to regulate the supply of gas to the burner while preventing gas flow if the pilot flame is not present. It works by receiving a signal from a thermocouple or thermopile that senses heat from the pilot flame; when the flame is active, the valve remains open, and if the flame goes out, it automatically shuts off the gas supply. Featuring 1/2" MPT gas inlet and outlet connections with a 1/4" CCT pilot outlet, it supports proper installation and dependable performance. This design helps improve operational safety, maintain stable heating, and support reliable oven functionality in commercial kitchen environments.

Category:

Tag: #BakersPride #M1557A #OvenGasSafetyValve

Description: The Bakers Pride R3104A oven millivolt actuator natural gas safety valve is designed to regulate gas supply and shut it off automatically if the pilot flame is not detected. It works with a millivolt system where heat from the pilot flame generates a small electrical signal through a thermopile, allowing the valve to remain open during normal operation. If the flame goes out, the signal stops and the valve closes to prevent gas buildup. Rated for 4" WC and up to 240,000 BTU, this component supports stable heating performance while enhancing safety and helping maintain consistent operation in commercial oven systems.

Category:

Tag: #BakersPride #R3104A #OvenMillivoltActuatorNaturalGasSafetyValve

Description: The Bakers Pride M1352X oven green lighted rocker switch is an electrical control component designed to manage the on/off function of compatible oven equipment. It works by completing or interrupting the electrical circuit when the rocker is pressed, allowing power to flow to the appliance or stopping it as needed. The integrated green indicator light illuminates when the switch is in the active position, giving users quick confirmation that the equipment is operating. With four terminals and a 16A 240VAC rating, it supports dependable electrical performance and helps improve operational awareness in busy commercial kitchen environments.

Category:

Tag: #BakersPride #M1352X #OvenGreenLightedRockerswitchTerminals

Description: The Bakers Pride M1352A oven green lighted rocker switch is an electrical control component designed to turn equipment circuits on or off while indicating active operation. It works by completing or interrupting the electrical connection when the rocker is pressed, allowing power to flow to the system. The built-in green indicator light illuminates when the circuit is active, offering quick visual confirmation during use. Featuring four terminals and rated at 16A 240VAC, it supports stable electrical performance. This design helps improve operational awareness, supports safe equipment control, and contributes to reliable day-to-day operation in commercial kitchen environments.

Category:

Tag: #BakersPride #M1352X #OvenGreenLightedRockerswitchTerminals

Description: The Bakers Pride M1352A oven green lighted rocker switch is an electrical control component designed to turn equipment circuits on or off while indicating active operation. It works by completing or interrupting the electrical connection when the rocker is pressed, allowing power to flow to the system. The built-in green indicator light illuminates when the circuit is active, offering quick visual confirmation during use. Featuring four terminals and rated at 16A 240VAC, it supports stable electrical performance. This design helps improve operational awareness, supports safe equipment control, and contributes to reliable day-to-day operation in commercial kitchen environments.

Category:

Tag: #BakersPride #M1352A #OvenGreenLightedRockerswitchTerminals

Description: The APW 2E-1327900 V Slot Down Infinite Switch with 4 screw holes is an electrical control component used to regulate the power delivered to heating elements in appliances such as warmers, griddles, and countertop cooking equipment. It works by cycling electrical current on and off at controlled intervals, allowing operators to increase or decrease heat output smoothly instead of using fixed temperature levels. This design helps maintain more consistent heating during cooking or food holding. The APW 2E-1327900 V Slot Down Infinite Switch is designed for secure mounting and dependable operation, helping improve temperature management, support efficient performance, and maintain steady heat control in demanding kitchen environments.

Category:

Tag: #Apw #2E-1327900 #SlotDownInfiniteSwitchScrewHoles

Description: The APW AS-69102-EGO Infinite Switch 120V, 15 AMP, EG is an electrical control component designed to regulate the power supplied to heating elements in warmers, griddles, and similar appliances. It works by cycling electrical current on and off at controlled intervals, allowing operators to adjust the heat level continuously rather than relying on fixed temperature settings. This gradual control helps maintain consistent heating performance during food preparation or holding. The APW AS-69102-EGO Infinite Switch supports efficient temperature management, improves operational flexibility, and helps reduce unnecessary power usage while contributing to dependable performance in busy foodservice environments.

Category:

Tag: #Apw #AS-69102-EGO #InfiniteSwitch

Description: The APW 2J-55564-EGO Infinite Control Switch is an electrical control component rated at 15A and 120V, designed to regulate the power supplied to heating elements. It works by cycling electrical current on and off at varying intervals, allowing operators to adjust heat levels smoothly rather than using fixed temperature settings. This helps maintain consistent warming or cooking conditions based on operational needs. The APW 2J-55564-EGO Infinite Control Switch supports efficient temperature management, improves operational flexibility, and helps reduce unnecessary energy use while maintaining reliable performance in busy commercial kitchen environments.

Category:

Tag: #Apw #2J-55564-EGO #InfiniteControlSwitch

Description: The APW AS-3100801 heater socket BS-1 is a replacement electrical component designed to hold and connect compatible heater elements within the unit. It works by creating a stable contact between the heater terminals and the equipment’s electrical supply, allowing current to flow safely and efficiently to the heating element. This connection supports proper heat generation while helping prevent loose wiring or interruptions during operation. The APW AS-3100801 heater socket is built to withstand regular use in commercial kitchen environments and assists in maintaining reliable equipment performance, making it a practical component for maintenance and repair tasks.

Category:

Tag: #Apw #AS-3100801 #HeaterSocket

Description: The APW 2N-75809 food warmer heating element is a 1610W, 208V replacement component designed for use in compatible food warmers. It works by converting electrical energy into steady radiant heat, which warms the internal surfaces of the unit and helps keep food at safe serving temperatures. This controlled heat output supports even warming and helps reduce temperature fluctuations during operation. The APW 2N-75809 heating element is built for reliable performance in busy kitchen environments and installed without included screws, making it suitable for straightforward replacement when servicing equipment. By restoring proper heating function, it helps maintain efficient operation and consistent food quality.

Category:

Tag: #Apw #2N-75809 #FoodWarmerHeatingElementScrews

Description: The APW 2N-55960 element is an 800W, 120V heating component designed for use in commercial warming or heating units. It works by converting electrical energy into controlled heat, which is then distributed through the appliance to support proper food holding or heating performance. This steady heat output helps maintain food quality by keeping items at appropriate temperatures without overheating. Built for reliable day-to-day operation, the APW 2N-55960 heating element supports efficient equipment performance while helping reduce temperature fluctuations. Its practical design also allows for straightforward replacement, making routine maintenance easier in busy kitchen environments.

Category:

Tag: #Apw #2N-55960 #Element

Description: The APW 2N-56322 warmer element is a 115V, 1500W heating component designed for use in compatible commercial food warming equipment. It works by converting electrical energy into consistent radiant heat, allowing the warmer to maintain appropriate holding temperatures for prepared food items. This even heat distribution helps preserve food texture, flavor, and quality during service periods. Built for dependable operation in busy kitchen environments, the element supports efficient warming without frequent reheating. Its practical design allows for straightforward installation and reliable performance, helping maintain proper food holding conditions and supporting smooth day-to-day foodservice operations.

Category:

Tag: #Apw #2N-56322 #WarmerElement

Description: The APW AS-54051 warmer element is a 208V, 1600W heating component designed for commercial food warmers, measuring approximately 16" x 6-1/4". It works by converting electrical energy into radiant heat, which spreads evenly across the warmer surface to maintain proper holding temperatures for cooked food. This steady heat output helps preserve food quality, texture, and serving temperature during busy kitchen operations. Its practical design supports reliable performance and fits compatible equipment with ease. By maintaining stable warming conditions, it helps improve workflow efficiency while reducing the need for frequent reheating in commercial foodservice environments.

Category:

Tag: #APW #AS-54051 #WarmerElement

Description: The American Range 10483 dial is a replacement control knob designed for griddles, featuring marked settings from Off and Low up to 250–500 degrees for precise adjustments. It works by connecting to the griddle’s control shaft, allowing operators to regulate gas or heat output by simply turning the dial to the desired setting. The clearly printed indicators support consistent cooking results and ease of use during busy kitchen operations. Its straightforward design also helps reduce guesswork, contributing to better efficiency and smoother daily performance.

Category:

Tag: #American #10483 #RangeDialGriddle

Description: The Amana 5900162 capacitor kit includes a .74 capacitor and diode, designed to store and release electrical energy while controlling current flow within the system. The capacitor helps maintain consistent voltage levels, while the diode ensures current moves in the correct direction, preventing electrical backflow. Together, they contribute to smoother operation and help reduce stress on electrical circuits. This combination can assist in improving efficiency, minimizing the risk of component damage, and supporting reliable performance in everyday use.

Category:

Tag: #Amana #5900162 #CapacitorKitAndDiode

Description: The Alto-Shaam FA-34524 box fan is a compact 3-inch, 230V fan designed to circulate air within commercial equipment, supporting proper ventilation and temperature control. It operates by drawing air through the unit and distributing it evenly to prevent heat buildup around sensitive components. Equipped with built-in thermal protection, it automatically safeguards the motor from excessive temperatures, enhancing operational safety. Its compact size allows easy installation in tight spaces, while steady airflow contributes to improved equipment performance, longer component life, and more reliable day-to-day operation.

Category:

Tag: #Alto-Shaam #FA-34524 #BoxFanwithThermalProtection

Description: The ROYAL RANGE 4421 oven thermostat is designed to regulate heat levels in commercial ovens by sensing internal temperature and adjusting gas flow accordingly. It works through a temperature-sensitive bulb connected by a capillary tube, which expands or contracts to signal the thermostat to increase or decrease the burner output. Featuring a by-pass adjustment and top-mounted control with a downward gas inlet, it allows precise calibration and reliable operation. Its durable construction supports regular use, while the extended capillary ensures flexible installation, helping maintain stable cooking temperatures and improve overall efficiency.

Category:

Tag: #ROYALRANGE #4421 #OvenThermostatByPassADJTopGasInletDownBulb

Description: The ROYAL RANGE 2053 CCW rotation blower wheel is designed to circulate air within commercial cooking equipment, supporting proper combustion and temperature control. It works by rotating counterclockwise to draw in and push air through the system, helping maintain steady airflow. Equipped with two set screws and a 1/2" center hole, it allows secure attachment to the motor shaft for stable operation. The durable construction supports regular use, while its precise dimensions ensure compatibility. This component helps improve airflow efficiency, supports even heat distribution, and contributes to reliable overall equipment operation.

Category:

Tag: #ROYALRANGE #2053 #RotationBlowerWheelSetScrewsDiaHole

Description: The Royal Range 1803 bottom waffle grate is a cast iron component designed to support even heat distribution during cooking. It works by absorbing and maintaining heat from the waffle iron, allowing batter to cook uniformly across the surface for reliable results. The durable cast iron construction helps withstand regular use while promoting consistent browning and texture. Its 8" x 15" size ensures proper fit and coverage within compatible equipment. This grate supports efficient cooking performance, reduces heat fluctuations, and contributes to maintaining product quality in busy commercial kitchen settings.

Category:

Tag: #RoyalRange #1803 #BottomWaffleGrateCastIron

Description: The Nu-Vu 66-1114 oven high limit switch is a safety device designed to monitor temperature levels and automatically interrupt power if the oven exceeds a preset limit. It works by sensing excessive heat and opening the electrical circuit, stopping further temperature rise until conditions return to a safe range or the unit is reset. This helps reduce the risk of equipment damage and enhances operational safety. Built for dependable performance, it supports consistent temperature control, extends equipment and provides added peace of mind in demanding commercial kitchen environments.

Category:

Tag: #Nu-Vu #66-1114 #OvenHighLimitSwitch

Description: The Nu-Vu 50-1277 timer knob is a black, 6 mm control component designed to fit securely onto a timer shaft, allowing users to manually adjust and set desired time intervals. It works by turning the connected timer mechanism, enabling precise selection of cooking or holding durations. Built for ease of use, it offers a firm grip and clear positioning for consistent operation. This knob helps restore proper control functionality, supports efficient kitchen workflow, and ensures reliable timing adjustments in commercial cooking environments without unnecessary complexity.

Category:

Tag: #Nu-Vu #50-1277 #TimerKnobBlack

Description: The Vita-Mix 015287 3HP motor assembly is a key internal component designed to drive the blender’s blade system with steady torque and speed. It operates on 120 VAC, converting electrical energy into mechanical motion that rotates the blades for smooth and uniform blending. Built for demanding commercial use, it supports consistent performance across a variety of food preparation tasks. This motor assembly helps maintain equipment functionality, reduces downtime, and ensures dependable operation, making it a practical replacement part for maintaining blending efficiency in busy kitchen environments.

Category:

Tag: #Vita-Mix #015287 #MotorAssembly

Description: The Turbo Air RCP1074 oven safety valve is designed to regulate and shut off gas supply if the pilot flame is not detected, preventing unsafe gas buildup. It works in conjunction with a thermocouple or thermopile, which senses heat from the pilot flame and signals the valve to remain open; if the flame goes out, the valve automatically closes. This mechanism supports consistent heating while enhancing safety. Built for compatibility with commercial ovens, it helps reduce risk, supports efficient performance, and contributes to reliable day-to-day kitchen operation.

Category:

Tag: #TurboAir #RCP1074 #OvenSafetyValve

Description: The Beverage Air R7203-020 SD door switch is an electrical component designed to detect door position in refrigeration units and activate or deactivate connected circuits accordingly. It works by completing or interrupting the electrical flow when the door moves, allowing lights or fans to respond automatically. Rated for 1.5A at 125VAC and 5A at 250VAC, it supports consistent performance under standard operating conditions. This switch helps improve energy efficiency, reduces unnecessary operation, and contributes to maintaining proper storage conditions inside the unit.

Category:

Tag: #BeverageAir #R7203-020 #DoorSwitch

Description: The Tri-Star ER-28583-00 hinge assembly is a mechanical component designed to support and control the opening and closing of doors on compatible commercial kitchen equipment. It works by anchoring the door to the frame and allowing controlled pivot motion, ensuring proper alignment and consistent sealing when closed. This helps reduce wear on the door and frame while maintaining stable operation during frequent use. Built for durability, it supports safe handling, minimizes maintenance issues, and helps maintain overall equipment efficiency in busy kitchen environments.

Category:

Tag: #Tri-Star #ER-28583-00 #HingeAssembly

Description: The Star Mfg 2J-0028200 pressure regulator is a natural gas component with a 3/4" connection, designed to maintain consistent outlet pressure for commercial kitchen equipment. It works by reducing and stabilizing incoming gas pressure, allowing burners to operate evenly and safely. This helps prevent pressure fluctuations that can impact heat output or equipment function. Built for dependable use, it supports safe operation, improves efficiency, and helps extend the life of connected appliances. Its simple, functional design makes it a practical replacement part for maintaining consistent gas system performance.

Category:

Tag: #StarMfg #2J-0028200 #PressureRegulatorNaturalGas

Description: The Star Mfg 8002 speed control potentiometer is an electrical component designed to regulate motor or device speed by varying resistance within the circuit. It works by adjusting the voltage supplied to the connected component as the control is turned, allowing smooth and accurate speed changes. Equipped with white wires and an integrated diode, it supports stable operation and protects against electrical irregularities, while the no positive off feature enables continuous control. This component helps improve operational accuracy, supports efficient performance, and contributes to reliable day-to-day equipment functionality.

Category:

Tag: #StarMfg #8002 #SpeedControlPotentiometerWhiteWiresDiode

Description: The Standard Keil 2830-4210-1110 oven latch with strike is a mechanical fastening component designed to hold the oven door firmly in place during operation. It works by engaging the latch mechanism with the strike plate when the door is closed, creating a tight seal without the need for a locking system. The offset handle allows for convenient operation and a comfortable grip. Built for durability and reliable alignment, it helps reduce heat loss, supports energy efficiency, and ensures stable cooking conditions, contributing to consistent results and dependable daily use.

Category:

Tag: #StandardKeil #2830-4210-1110 #OvenLatchStrikeLockOffsetHandle

Description: The Scotsman SCA39031-021 ice thickness sensor is a precision component designed to detect the thickness of ice as it forms on the evaporator plate. It works by sensing contact or proximity to the ice surface and signaling the control system when the desired thickness is reached, prompting the harvest cycle. This helps prevent overbuilding or underproduction of ice. Built for consistent performance, it supports efficient machine operation, reduces unnecessary strain on components, and helps maintain uniform ice quality, contributing to reliable output and smoother day-to-day operation.

Category:

Tag: #Scotsman #SCA39031-021 #IceThicknessSensorBlack

Description: The Southbend 1175568 2-speed oven convection motor is a reliable component designed to circulate hot air efficiently within convection ovens. Operating on 208/230V, 50Hz, single-phase power, it drives the fan to distribute heat evenly, helping reduce hot spots and improve cooking uniformity. The dual-speed functionality allows flexibility for different cooking requirements, supporting both gentle and high-intensity airflow. Built for durability in demanding kitchen environments, it contributes to stable oven performance and energy efficiency. This motor helps maintain proper temperature balance, ultimately supporting consistent food quality and smoother kitchen operations.

Category:

Tag: #Southbend #1175568 #SpeedOvenConvectionMotor

Description: The Southbend 1192319 range radiant charbroiler assembly is a key component designed to evenly radiate heat across the cooking surface, supporting uniform grilling results. It works by absorbing and redistributing heat from the burner, creating steady radiant energy that enhances cooking efficiency while reducing flare-ups. Built for compatibility with commercial ranges, it helps maintain proper cooking temperatures and improves overall food quality. The sturdy construction supports regular use in demanding environments, while its functional design aids in consistent heat control, making it a practical solution for maintaining dependable charbroiler operation.

Category:

Tag: #Southbend #1192319 #RangeRadiantCharbroilerAssembly

Description: The Southbend 1166493 black indicator knob is a replacement control component featuring clearly printed white markings from OFF to 10 for accurate adjustments. It attaches to the control shaft of compatible equipment, allowing users to regulate heat or power levels by simply turning the knob to the desired setting. Designed for straightforward installation, it helps restore usability and visibility in worn or damaged controls. The durable construction supports regular use, while the easy-to-read numbering improves operational accuracy, making it a practical solution for maintaining efficient and controlled performance in commercial kitchen equipment.

Category:

Tag: #Southbend #1166493 #BlackIndicatorKnobPrintedWhiteNumber

Description: The Champion 108351 Repair Kit is a service kit designed to replace worn or damaged internal parts in compatible commercial equipment, helping maintain reliable operation. It works by supplying pre-matched components that fit together seamlessly, allowing technicians to quickly service and restore system performance without extensive modifications. By addressing common wear points, it supports consistent operation and helps prevent unexpected breakdowns. This kit also reduces maintenance time, improves equipment longevity, and ensures smoother performance, making it a practical solution for routine servicing and operational reliability.

Category:

Tag: #Champion #108351 #RepairKit

Description: The Middleby Marshall 71037 Electrode Cable Kit is a replacement part designed for commercial oven systems, connecting the ignition electrode to the power source to enable proper spark generation during operation. It works by transmitting high-voltage signals needed to ignite the gas-air mixture, while its insulated construction helps prevent electrical loss and reduces the risk of short circuits. Designed for secure fit and stable performance, it supports consistent ignition and smooth oven operation. The kit also helps minimize downtime, improve safety, and maintain overall equipment efficiency, making it a practical choice for routine maintenance.

Category:

Tag: #MiddlebyMarshall #71037 #ElectrodeCableKit

Description: The Middleby Marshall 273810023 oven blower motor is a replacement component designed with a 6" x 5/8" shaft and clockwise reversible rotation for flexible installation. It works by driving the blower fan, circulating hot air throughout the oven chamber to maintain uniform cooking temperatures. This steady airflow supports efficient heat transfer and stable operation. Benefits include improved cooking consistency, reduced hot spots, and dependable performance, helping extend equipment longevity while supporting smooth day-to-day kitchen operations without unnecessary complexity.

Category:

Tag: #MiddlebyMarshall #273810023 #OvenBlowerMotorShaftCWreversibleRotation

Description: The Middleby Marshall 64169 1/2" LP gas pressure regulator is designed to manage incoming gas pressure and deliver it within an adjustable range of 5.5" to 12" WC for optimal burner performance. It works by reducing and stabilizing higher inlet pressure to a usable level, maintaining steady flow through its internal diaphragm and valve mechanism. With 1/2" FPT connections for easy installation, it supports reliable operation and helps prevent pressure fluctuations. Benefits include improved safety, consistent heating performance, and reduced wear on gas components, contributing to smoother and more dependable equipment functionality.

Category:

Tag: #MiddlebyMarshall #64169 #LPGasPressureRegulatorInletPressure

Description: The Middleby Marshall 45036 circuit breaker is a 240V, 3A component with two terminals, designed to safeguard oven electrical systems by interrupting power when current exceeds safe limits. It works by automatically tripping when an overcurrent condition is detected, stopping the flow of electricity until the issue is resolved and the breaker is reset. This helps protect internal components and wiring from potential damage. Benefits include enhanced equipment safety, reduced risk of downtime, and consistent operational performance in demanding commercial kitchen environments.

Category:

Tag: #MiddlebyMarshall #45036 #CircuitBreakerforConveyor

Description: The Keating 2554 NAT gas pressure regulator is designed to regulate incoming gas flow to a stable outlet pressure, typically set at 3.5" WC and adjustable between 3" and 7" WC to suit equipment requirements. It works by reducing higher inlet pressure and maintaining a consistent output, ensuring proper combustion and balanced fuel delivery. This helps appliances operate reliably while minimizing fluctuations that can affect performance. Benefits include improved safety, consistent flame control, and smoother equipment operation, making it a practical component for maintaining efficiency and compliance in gas-powered systems.

Category:

Tag: #Keating #2554 #NATGasPressureRegulator

Description: The Keating 002554 pressure regulator is designed to adjust and control incoming gas flow so compatible appliances can operate safely on natural gas. It works by reducing and maintaining gas pressure at the proper level required for efficient combustion, helping balance the fuel-to-air ratio within the system. This controlled regulation supports consistent burner performance and dependable heat output. Benefits include improved operational safety, steady flame characteristics, and reliable equipment function after fuel conversion. Its straightforward installation helps maintain compliance with gas specifications while supporting efficient, day-to-day commercial kitchen performance.

Category:

Tag: #Keating #002554 #NaturalGasToLPConversionKit

Description: The Keating 002553 Natural Gas to LP Conversion Kit is designed to modify compatible appliances to operate at an 11" WC pressure standard. It works by replacing or adjusting key gas delivery components such as orifices and regulators to match propane’s combustion characteristics, ensuring proper fuel-air mixture and stable performance. This conversion helps maintain consistent heating output while supporting compliance with fuel requirements. Benefits include improved operational flexibility, reliable performance after conversion, and compatibility with LP fuel systems, making it a practical solution for adapting equipment to different fuel sources.

Category:

Tag: #Keating #002553 #NaturalGasToLPConversionKit

Description: The 2401 Pilot Kit with Orifices is a complete assembly designed to supply and regulate gas flow to the pilot burner, compatible with both 3/16" and 1/4" tube sizes. It works by directing gas through precisely sized orifices to create a steady, controlled flame that ignites the main burner when needed. This controlled delivery helps maintain proper combustion and system safety. The included components support straightforward installation and compatibility with various setups. Overall, it enhances ignition reliability, supports efficient operation, and helps reduce issues related to inconsistent pilot performance.

Category:

Tag: #Keating #2401 #PilotKitwithOrificesTubeSize

Description: The Keating 002567 Coaxial Thermopile is a 36-inch component designed to convert heat from a pilot flame into electrical energy within a 250–750mV range. It works by combining multiple thermocouples in series, generating sufficient voltage to control gas valves without requiring an external power source. This ensures that gas flow is maintained only when a stable flame is present, enhancing operational safety. Its coaxial construction supports consistent signal transmission and durability in high-temperature environments. Overall, it helps improve system reliability, supports efficient performance, and reduces dependence on external electrical connections in commercial equipment.

Category:

Tag: #Keating #002401 #PilotKitNaturalGasLiquidPropane

Description: The Keating 002567 Coaxial Thermopile is a 36-inch component designed to convert heat energy from a pilot flame into electrical voltage within a 250–750mV range. It works by using multiple thermocouples connected in series to produce sufficient power to operate gas valves without an external electrical source. This allows the system to maintain proper gas flow only when a stable flame is present. Its coaxial design supports reliable signal transmission and durability in high-heat environments. The result is improved operational safety, steady performance, and reduced dependency on external power sources in commercial kitchen equipment.

Category:

Tag: #Keating #002567 #CoaxialThermopile

Description: The Manitowoc 7888 Magnetic Bin Switch is a sensing component designed to monitor the ice level within the storage bin. It works by using a magnetic mechanism that responds to the position of a bin control arm or door, signaling the machine to start or stop ice production accordingly. This helps prevent overfilling and ensures the unit operates only when needed. By supporting accurate operation, it contributes to energy efficiency, reduces unnecessary wear on components, and helps maintain consistent performance in commercial ice machines.

Category:

Tag: #Manitowoc #7888 #MagneticBinSwitch

Description: The Manitowoc 9405653 Ice Machine Sanitizer is a liquid cleaning solution specifically formulated to remove bacteria, slime, and contaminants from internal components. It works by circulating through the machine during the cleaning cycle, breaking down buildup and sanitizing surfaces that come into contact with water and ice. Regular use helps support hygiene standards, prevent odor development, and maintain consistent ice quality. This contributes to reliable machine performance, reduces the risk of contamination, and supports routine maintenance practices in commercial foodservice environments.

Category:

Tag: #Manitowoc #9405653 #IceMachineSanitizer

Description: The Manitowoc 4304393 Ice Machine Door & Frame Assembly is designed to house and protect the ice storage area while maintaining consistent internal temperatures. It works by forming a tight seal around the bin opening, helping to prevent warm air intrusion and reduce temperature fluctuations. The integrated frame ensures proper alignment and durability during frequent use. This contributes to improved ice retention, reduced energy consumption, and reliable performance, while also supporting cleanliness by limiting exposure to external contaminants in commercial environments.

Category:

Tag: #Manitowoc #4304393 #IceMachineDoorFrameAssembly

Description: The Manitowoc 43-0464-3 Ice Machine Water Curtain is a key internal component that helps guide water evenly across the evaporator plate during operation. It functions by controlling the direction and distribution of water while also assisting in the separation of ice during the harvest cycle. This process supports uniform ice production and minimizes water splashing within the unit. By maintaining proper water management, it helps improve ice quality, supports reliable machine performance, and reduces the likelihood of operational disruptions or excess maintenance in demanding environments.

Category:

Tag: #Manitowoc #43-0464-3 #IceMachineWaterCurtain

Description: The Henny Penny 56630 Fryer Filter Pump & Motor Assembly is a complete unit designed to move hot cooking oil through the filtration system, helping remove food particles and impurities. It operates by using a motor-driven pump to draw oil from the fryer, pass it through filters, and return it for continued use. This process helps maintain oil quality, improve cooking results, and reduce waste. With its 1/2" FPT inlet and outlet connections, it supports secure installation and reliable operation in demanding commercial kitchen environments.

Category:

Tag: #HennyPenny #56630 #FryerFilterPumpMotoAssembly

Description: The Ultrafryer 20A021 Stera-Sheen Cleaner Red CS24 is a specialized cleaning agent formulated to remove residue, mineral buildup, and contaminants from internal components of equipment such as beverage dispensers and lines. It works by breaking down deposits and flushing them away during routine cleaning cycles, helping to maintain proper flow and sanitation. Regular use supports consistent equipment performance and helps extend service life. This cleaner also aids in preserving product quality by reducing buildup that can affect taste, making it a practical choice for routine maintenance in commercial settings.

Category:

Tag: #Ultrafryer #20A021 #SteraSheenCleanerRed

Description: The Stero 0P-651136 dishwasher pressure gauge is a 2-1/2" dial instrument designed to measure pressure levels from 0 to 60 PSI. It works by using an internal sensing mechanism that responds to pressure changes and displays real-time readings on an easy-to-read dial. Featuring a 1/4" MPT connection, it allows secure and straightforward installation in compatible systems. This gauge helps operators maintain proper pressure levels, supporting effective cleaning results while reducing the risk of system strain or damage. Its reliable performance aids in routine monitoring and contributes to efficient equipment operation.

Category:

Tag: #Stero #0P-651136 #DishwasherPressureGauge

Description: The Stero 0P-521855 fast-acting fuse is a compact safety component designed for electrical systems requiring 10A, 600V protection. It works by melting its internal element when current exceeds safe limits, immediately breaking the circuit to prevent damage to equipment. Its 13/32" x 1-1/2" size allows for easy installation in compatible fuse holders. This helps safeguard sensitive components, reduce the risk of electrical faults, and support consistent equipment operation. Built for dependable performance, it contributes to improved safety and minimizes costly downtime in commercial applications.

Category:

Tag: #Stero #0P-521855 #FastActingFuse

Description: The Stero 0P-571697 1" dishwasher shaft pump seal is a replacement component designed to create a secure barrier between the pump shaft and housing. It works by tightly sealing around the rotating shaft, preventing water from escaping while allowing smooth operation of the pump. This helps protect internal components from moisture damage and reduces the risk of downtime. Built for proper fit and durability, it supports consistent washing performance, extends equipment life, and helps maintain safe and efficient kitchen operations with minimal maintenance.

Category:

Tag: #Stero #0P-571697 #dishwashershaftPumpSeal

Description: The Delfield 070000030 Triple Dart Gasket is a replacement door gasket designed to fit specific refrigeration units, helping to prevent cold air loss. It works by forming a secure seal along the door frame using its triple dart profile, which enhances flexibility and sealing strength. This design helps keep internal temperatures stable while reducing energy consumption and compressor workload. Made for durability and proper fit, it supports efficient operation, protects stored contents, and minimizes maintenance needs by reducing air infiltration and temperature fluctuations.

Category:

Tag: #Delfield #070000030 #TripleDartGasket

Description: The Delfield 1701187 19 Size Door Gasket is a replacement sealing component designed to fit compatible refrigeration unit doors, helping to prevent air leaks. It works by creating a tight magnetic seal around the door frame, ensuring that cold air remains inside while blocking warm external air from entering. This consistent sealing supports stable temperature control, reduces energy consumption, and minimizes strain on the cooling system. Built for durability and proper fit, it also helps protect stored contents and contributes to overall equipment reliability and performance.

Category:

Tag: #Delfield #1701187 #SizeDoorGasket

Description: The Delfield 2193910 cooler control is a complete temperature control assembly that includes a knob, mounting plate, and a 3/8" x 1-1/2" coiled sensing bulb for responsive operation. It works by detecting internal cabinet temperature through the bulb and adjusting the cooling cycle accordingly via the control mechanism. This helps maintain stable storage conditions for perishable items while preventing temperature fluctuations. Designed for straightforward installation and dependable function, it supports energy efficiency, reduces equipment strain, and helps extend the overall lifespan of refrigeration systems.

Category:

Tag: #Delfield #2193910 #CoolerControlKnobCoiledBulb

Description: The Delfield SEP90024 240V infinite control rotary switch is an electrical component designed to regulate power levels in compatible commercial appliances, rated at 15A with a horizontal palnut mount for secure installation. It works by allowing smooth, incremental adjustment of electrical current through a rotary dial, enabling operators to fine-tune temperature or heating intensity as needed. This controlled modulation helps maintain stable operating conditions, reduces energy waste, and supports efficient equipment use. Its straightforward design and reliable operation make it a practical choice for maintaining consistent performance in demanding kitchen environments.

Category:

Tag: #Delfield #SEP90024 #InfiniteControlRotarySwitchwithHorizontalPalnutMount

Description: The Duke 153035 1/2–1/4 HP 2-speed oven motor is designed to drive fans or blowers, operating at 1725/1140 RPM on a 115V power supply to support efficient heat circulation. It works by converting electrical energy into mechanical motion, allowing operators to select between two speeds based on cooking requirements. This controlled airflow helps maintain even temperature distribution inside the oven. Benefits include improved cooking consistency, energy efficiency through variable speed operation, and dependable performance, making it a practical replacement component for maintaining proper oven functionality and extending equipment lifespan.

Category:

Tag: #Duke #153035 #SpeedOvenMotor

Description: The Duke 3553-2 1/2" LP gas pressure regulator is designed to control and maintain outlet pressure within a 5.5" to 12" WC range, supporting reliable operation of compatible gas appliances. It works by reducing incoming gas pressure through an internal diaphragm and spring mechanism, delivering a steady flow despite supply fluctuations. Featuring 1/2" FPT inlet and outlet connections, it allows straightforward installation. Benefits include improved safety, enhanced fuel efficiency, consistent heating output, and reduced wear on equipment components, making it a dependable choice for maintaining proper gas system performance.

Category:

Tag: #Duke #3553-2 #LPGasPressureRegulatorInletPressure

Description: The Market Forge 97-5339 black indicator knob is designed with clearly printed white numbers from OFF to 10, allowing operators to easily adjust temperature or power levels. It works by attaching securely to a compatible control shaft, enabling smooth rotation to select the desired setting with accuracy. Built for durability, it withstands frequent use in commercial environments. Benefits include improved visibility, enhanced control accuracy, reduced chances of incorrect settings, and simple installation, making it a practical replacement part for maintaining efficient and reliable equipment performance.

Category:

Tag: #MarketForge #97-5413 #StainlessSteelHandleDrawOfValves

Description: The Market Forge 97-5339 black indicator knob is designed with clearly printed white numbers from OFF to 10, allowing operators to easily adjust temperature or power levels. It works by attaching securely to a compatible control shaft, enabling smooth rotation to select the desired setting with accuracy. Built for durability, it withstands frequent use in commercial environments. Benefits include improved visibility, enhanced control accuracy, reduced chances of incorrect settings, and simple installation, making it a practical replacement part for maintaining efficient and reliable equipment performance.

Category:

Tag: #MarketForge #97-5339 #BlackIndicatorKnobPrintedWhiteNumber

Description: The Market Forge 97-5013 black indicator knob is designed to adjust temperature or power levels, featuring clearly printed white numbers from OFF to 10 for easy readability. It works by securely fitting onto a compatible control shaft, allowing users to rotate the knob to select the desired setting with accuracy. The durable construction ensures reliable performance in demanding kitchen environments. Benefits include improved user control, quick visual reference, reduced operating errors, and straightforward replacement, making it a practical component for maintaining efficient and consistent equipment performance.

Category:

Tag: #MarketForge #97-5013 #BlackIndicatorKnobPrintedWhiteNumber

Description: The Roundup - AJ Antunes 7000989 platen release sheet is designed for use with heated platens, creating a protective, non-stick barrier between the cooking surface and food products. It works by withstanding high temperatures while allowing heat to transfer evenly, ensuring consistent cooking results without residue buildup. This sheet also reduces direct contact with the platen, minimizing wear and simplifying cleanup. Benefits include improved food quality, reduced maintenance time, extended equipment life, and more efficient kitchen operations, making it a practical accessory for high-volume foodservice environments.

Category:

Tag: #RoundupAJAntunes #7000989

Description: The Roundup - AJ Antunes 7001337 warmer momentary switch is an electrical control component designed to activate equipment functions only while pressed, providing precise, user-controlled operation. It works by temporarily completing an electrical circuit when engaged, allowing operators to manage heating or related processes efficiently. Paired with compatible systems, it supports smooth workflow and reduces unnecessary energy use. Benefits include improved operational control, enhanced safety through momentary activation, dependable performance, and ease of use, making it a practical choice for maintaining consistency and efficiency in foodservice environments.

Category:

Tag: #RoundupAJAntunes #7001337 #WarmerMomentarySwitchGreen

Description: The Roundup - AJ Antunes 7000240 gear motor kit is a complete drive assembly designed to convert electrical energy into controlled mechanical motion while simultaneously supporting airflow through its integrated cooling fan shaft. It works by using a geared motor to regulate speed and torque, ensuring smooth and efficient movement of internal components, while the fan shaft helps dissipate heat during operation. This combination enhances performance stability and reduces the risk of overheating. Benefits include improved operational efficiency, extended component lifespan, consistent output, and dependable performance in demanding commercial kitchen environments.

Category:

Tag: #RoundupAJAntunes #7000240 #GearMotorKitCoolingFanShaft

Description: The Cleveland 2358200 fryer rotary seal shaft is designed to maintain a tight barrier where a shaft passes through the fryer assembly, helping prevent oil leakage during use. It works by creating a controlled sealing surface that accommodates rotational movement while minimizing gaps that could allow hot oil to escape. This design supports smooth shaft operation without compromising containment. Benefits include reduced risk of leaks, improved equipment safety, protection of internal components, and durable construction suited for high-temperature environments, making it a practical replacement part for maintaining reliable fryer performance.

Category:

Tag: #Cleveland #2358200 #FryerRotarySealShaft

Description: The Everpure EV311238 20" replacement bowl for E Series prefilters is designed to enclose and protect the filter cartridge within compatible water filtration systems. It works by attaching to the filter head to form a sealed chamber, directing incoming water through the prefilter media to capture sediment and debris before it reaches downstream equipment. This enclosed design helps maintain proper flow and filtration efficiency. Benefits include dependable leak prevention, durable construction for long-term use, straightforward installation, and reliable protection of filtration components, making it a practical replacement part for sustaining consistent water system performance.

Category:

Tag: #Everpure #EV311238 #ReplacementBowlSeriesPrefilter

Description: The Everpure EV311239 10" black prefilter replacement bowl is designed to enclose and protect compatible filter cartridges within a water filtration assembly. It works by threading onto the filter head, creating a sealed chamber that directs incoming water through the installed prefilter before it moves further into the system. This containment helps ensure proper filtration and prevents leaks during operation. Benefits include durable construction for long-term use, reliable sealing capability, straightforward installation, and effective protection of internal filter elements, making it a practical replacement component for maintaining dependable water filtration performance.

Category:

Tag: #Everpure #EV311239 #BlackPrefilterReplacementBowl

Description: The Everpure 311239 10" black prefilter replacement bowl is designed to enclose and protect compatible filter cartridges within a water filtration assembly. It works by threading onto the filter head, creating a sealed chamber that directs incoming water through the installed prefilter before it moves further into the system. This containment helps ensure proper filtration and prevents leaks during operation. Benefits include durable construction for long-term use, reliable sealing capability, straightforward installation, and effective protection of internal filter elements, making it a practical replacement component for maintaining dependable water filtration performance.

Category:

Tag: #Everpure #311239 #BlackPrefilterReplacementBowl

Description: The Montague MON3580-7 grate top section measures 31" x 12" and is designed to fit compatible commercial range tops. It works by sitting securely over the burner assembly, supporting cookware while allowing heat and flame to pass through the openings for consistent contact with pots and pans. The heavy-duty construction helps retain and distribute heat evenly across the cooking surface. Benefits include strong load-bearing capability, improved heat consistency, resistance to high temperatures, and reliable fitment, making it a practical replacement component for maintaining stable and efficient range operation in demanding kitchen environments.

Category:

Tag: #Montague #MON3580-7 #GrateTopSection

Description: The Montague 1068-5 1/8" NPT gas valve with 3/8" CCT outlet is designed to manage the delivery of gas to compatible commercial cooking equipment. It works by allowing the operator to adjust the valve, controlling the volume of gas supplied to the burner for accurate flame adjustment. This controlled flow supports consistent heating performance and responsive temperature regulation during cooking. Benefits include dependable flame modulation, secure connection compatibility, durable construction for demanding environments, and reliable gas control, making it a practical replacement component for maintaining efficient and safe range or burner operation.

Category:

Tag: #Montague #1068-5 #GasValve

Description: The Southbend 1189311 flame sensor features a 90-degree design for proper positioning within compatible commercial cooking equipment. It works by detecting the presence of a burner flame through flame rectification, sending a signal to the ignition control module to confirm safe combustion. If the flame is not detected, the system shuts off the gas supply to prevent unsafe conditions. This continuous monitoring helps maintain controlled operation. Benefits include enhanced safety, dependable flame verification, durable construction for high-temperature environments, and accurate integration with designated systems, making it a practical replacement component for maintaining consistent and secure equipment performance.

Category:

Tag: #Southbend #1189311 #FlameSensorDeg

Description: The Southbend 1194249 S24 right quadrant assembly is designed to connect the control knob to the gas valve mechanism on compatible commercial ranges. It works by guiding the rotational movement of the knob, transferring that motion to the valve shaft to regulate gas flow and adjust flame intensity. This precise linkage supports smooth operation and dependable heat control during cooking. Benefits include reliable alignment of control settings, durable construction for high-use environments, improved operational consistency, and proper compatibility with designated equipment, making it a practical replacement component for maintaining efficient and controlled range functionality.

Category:

Tag: #Southbend #1194249 #QuadrantAssembly

Description: The Southbend 1190769 range left side quadrant assembly S24 is designed to align with the control mechanism on compatible commercial ranges, helping translate knob movement into precise valve adjustment. It works by connecting the control knob to the internal gas valve shaft, guiding rotation and ensuring consistent positioning for accurate flame settings. This coordinated movement allows operators to regulate heat levels effectively during cooking. Benefits include reliable control response, proper alignment of burner settings, durable construction for high-use environments, and dependable compatibility, making it a practical replacement component for maintaining consistent and efficient range performance.

Category:

Tag: #Southbend #1190769 #RangeLeftSideQuadrantAssembly

Description: The Southbend 1186650 range spark electrode features a 3/8" tip and 17" length, designed to generate the spark needed to ignite gas in compatible commercial range burners. It works by receiving high-voltage current from the ignition module and producing an electrical spark at the electrode tip, which ignites the gas-air mixture at the burner. This controlled ignition process helps ensure dependable lighting performance. Benefits include reliable spark generation, improved ignition consistency, durable construction for high-temperature environments, and proper fitment for designated equipment, making it a practical replacement component for maintaining efficient range operation.

Category:

Tag: #Southbend #1186650 #RangeSparkElectrode

Description: The Southbend 1176004 range burner valve features a 1/8" MPT inlet and 3/8"-27 outlet connection, designed to manage gas delivery to compatible commercial range burners. It works by allowing the operator to adjust the valve stem, increasing or decreasing gas flow to achieve the desired flame intensity. This controlled regulation supports consistent heating performance and responsive temperature adjustment during cooking. Benefits include dependable flame modulation, secure connection compatibility, durable construction for high-use environments, and reliable gas control, making it a practical replacement component for maintaining efficient and safe range functionality in commercial kitchens.

Category:

Tag: #Southbend #1176004 #RangeBurnerValve

Description: The Frymaster 20661 swing nozzle 8" center faucet includes a hot spindle and handle, designed for use with compatible commercial sink assemblies. It works by allowing the user to rotate the 8-inch swing spout for directional water flow, while the hot spindle and handle regulate water volume and temperature. This configuration supports efficient rinsing and cleaning tasks in busy kitchen environments. Benefits include smooth handle operation, adjustable spout positioning, durable construction for frequent use, and reliable water control, making it a practical replacement component for maintaining functional and efficient sink performance in commercial settings.

Category:

Tag: #Frymaster #20661 #SwinNozzleCenterFaucet

Description: The Randell RF FLT251 drier is designed to protect refrigeration components by filtering debris and absorbing moisture from the refrigerant as it circulates through the sealed system. It works by directing refrigerant through a desiccant core that traps water and unwanted particles, helping prevent corrosion, ice formation, and internal blockages. This protection supports efficient heat exchange and consistent operation. Benefits include extended equipment life, improved system reliability, reduced risk of compressor damage, and dependable performance in commercial environments, making it a practical replacement component for maintaining proper refrigeration system integrity.

Category:

Tag: #Randell #RF FLT251 #Drier

Description: The Randell HD GAS802 1/2" LP gas pressure regulator is designed with 1/2" FPT inlet and outlet connections and offers an adjustable outlet range of 5.5" to 12" WC, with a 1/2 lb maximum inlet pressure. It works by reducing incoming gas pressure to a controlled, steady level suitable for proper burner operation, automatically adjusting to fluctuations in supply. This regulation supports consistent combustion and reliable heating. Benefits include improved flame stability, enhanced operational safety, optimized gas flow control, and durable construction for commercial environments, making it a practical component for dependable LP gas system management.

Category:

Tag: #Randell #HD GAS802

Description: The Randell RP DRP107 refrigerator evaporator pan measures 18-1/4" x 4-1/4" and is designed to capture condensation produced during normal cooling cycles. It works by positioning beneath the evaporator or drain outlet, allowing moisture to flow into the pan where it can safely evaporate through ambient heat or system-assisted evaporation. This controlled collection helps prevent water buildup and potential leaks inside or around the unit. Benefits include improved moisture management, reduced risk of floor damage, enhanced sanitation, and durable construction suited for commercial environments, making it a practical replacement component for maintaining reliable refrigeration operation.

Category:

Tag: #Randell #RP DRP107 #RefrigeratorEvaporatorPan

Description: The Randell RDLR-02 cast iron bottom grate measures 15" x 8" and features 72 square holes designed to allow even airflow and heat circulation beneath cookware. It works by positioning securely over the burner assembly, supporting pots and pans while permitting flame and heat to pass evenly through the openings. The cast iron construction retains and distributes heat effectively, contributing to stable cooking conditions. Benefits include strong load-bearing capacity, improved heat consistency, resistance to high temperatures, and dependable fitment, making it a practical replacement component for maintaining efficient and balanced range operation in commercial kitchens.

Category:

Tag: #Randell #RDLR-02 #CastIronBottomGrateHoles

Description: The Randell IN GSK1025 Door Gasket is a durable replacement seal designed to maintain proper temperature control and energy efficiency in commercial refrigeration units. Measuring 21-1/2" x 24-1/4", this gray push-in gasket features a 7/16" magnetic insert with a 1" top OD, 15/16" base, and 1 3/16" height to ensure a secure and consistent seal. It works by creating an airtight barrier between the refrigerator door and cabinet frame, preventing cold air from escaping and warm air from entering. By restoring a tight seal, it helps improve cooling performance, reduce energy consumption, minimize compressor strain, and support safe food storage conditions in professional kitchen environments.

Category:

Tag: #Randell #INGSK1025 #DoorGasket

Description: The Blodgett M2382 instant-on relay is designed to control electrical circuits within compatible oven systems by activating components without delay when energized. It works by using an internal electromagnetic mechanism that closes or opens contacts as soon as voltage is applied, allowing connected elements such as motors, heating components, or control circuits to start instantly. This direct response supports efficient system performance and proper sequencing. Benefits include reliable circuit activation, reduced startup lag, durable construction for commercial environments, and consistent electrical control, making it a practical replacement component for maintaining dependable oven functionality.

Category:

Tag: #Blodgett #M2382 #InstantOnRelay

Description: The Blodgett 16529 oven thermal delay relay is rated for 3 amps at 115V and is designed to manage delayed activation of specific electrical components within compatible oven systems. It works by using a thermal element that heats when energized, creating a controlled time delay before closing or opening the circuit. This delay allows certain components to start in sequence, helping protect equipment and ensure proper operating conditions. Benefits include improved system coordination, reduced electrical stress on components, dependable switching performance, and reliable integration into commercial oven applications for consistent and efficient operation.

Category:

Tag: #Blodgett #16529 #OvenThermalDelayRelay

Description: The Blodgett 08711 oven solenoid valve repair kit is designed for 3/4" valves and includes a 9/16" diameter component with a 4-bolt configuration and 24V coil. It works by replacing worn or damaged internal solenoid parts, allowing the valve to open and close in response to electrical signals from the control system. When energized, the 24V coil actuates the valve to permit gas flow; when de-energized, it shuts off flow for safety. Benefits include improved valve responsiveness, enhanced operational safety, cost-effective maintenance, and dependable performance in commercial kitchen environments.

Category:

Tag: #Blodgett #08711 #OvenSolenoidValveRepairKit

Description: The Blodgett 11334 oven pilot burner is designed for natural and LP gas applications and features 3/16" and 1/4" tubing connections with a straight flame pattern, air duct, and mounting screw for secure installation. It works by directing a controlled flow of gas through the pilot assembly, where it is ignited to produce a stable flame that lights the main burner when heat is required. This steady ignition source helps maintain proper temperature control. Benefits include reliable burner activation, compatibility with multiple gas types, durable construction, and straightforward installation for maintaining efficient oven performance.

Category:

Tag: #Blodgett #11334 #OvenPilotBurnerTubeFlamePatternStraightAir

Description: The Blodgett BL56463 oven pilot burner for natural gas is designed to produce a consistent pilot flame that ignites the main burner when heat is required. It works by directing a controlled flow of natural gas through the pilot assembly, where it is ignited to maintain a small, stable flame. This flame activates the main burner and supports proper temperature control within the oven. Benefits include dependable ignition performance, improved operational safety, stable burner activation, and durable construction suited for commercial kitchen environments, making it a practical replacement component for maintaining consistent oven functionality.

Category:

Tag: #Blodgett #BL56463 #OvenPilotBurner

Description: The Blodgett 03834 oven coaxial heavy-duty thermocouple measures 48 inches and produces 20–30 millivolts, featuring 11/32"-32 nickel-plated threads for secure installation. It works by generating a small electrical signal when heated by the pilot flame, which signals the gas valve to remain open and maintain proper burner operation. If the flame is lost, the signal stops, prompting the valve to shut off gas flow for safety. Benefits include reliable flame detection, enhanced operational safety, durable nickel-plated construction for long-term performance, and compatibility with designated oven systems, making it a practical replacement component for maintaining efficient gas control.

Category:

Tag: #Blodgett #03834 #OvenCoaxialHeavyDutyThermocoupleThreadsNickelPlated

Description: The Blodgett BL33152 Oven Temperature Control with Potentiometer ensures accurate temperature regulation for consistent oven performance. This replacement control component is designed for compatible commercial ovens and manages heat levels by adjusting electrical resistance through its integrated potentiometer. As the temperature setting is changed, the potentiometer signals the control system to maintain the desired heat output, helping the oven operate within a precise range. This supports even cooking results and reduces temperature fluctuations during operation. Built for dependable performance in demanding kitchen environments, it helps maintain product quality, supports energy efficiency, and minimizes downtime by restoring proper temperature control to your equipment.

Category:

Tag: #Blodgett #BL33152 #OvenTemperatureControlPotentiometer

Description: The Pitco A4500602 fryer shelf basket support measures 17.5" x 13.5" and is designed to hold fryer baskets securely when not immersed in oil. It works by mounting adjacent to the fryer, creating a sturdy resting surface that allows baskets to drain excess oil after cooking. This positioning helps keep hot baskets elevated and organized during busy service periods. Benefits include improved safety by reducing spills, enhanced oil drainage for better food quality, durable construction for commercial use, and convenient access to baskets, making it a practical addition for maintaining orderly and efficient fryer operations.

Category:

Tag: #Pitco #A4500602 #FryerShelfBasketSupport

Description: The Pitco P8903-41 natural gas pressure regulator is designed to control incoming gas flow, with a standard setting of 3.5" WC and an adjustable range from 3" WC to 7" WC. It works by reducing and stabilizing higher inlet gas pressure to a controlled outlet pressure suitable for proper burner performance. This regulation helps ensure steady combustion and reliable heating. Benefits include improved flame stability, enhanced equipment safety, optimized energy use, and dependable performance in commercial kitchen environments, making it a practical component for maintaining accurate gas pressure control in compatible systems.

Category:

Tag: #Pitco #P8903-41 #NaturalGasPressureRegulator

Description: The Pitco P8901-64 thermopile with PG9 adaptor produces up to 750 millivolts and is designed for use in compatible gas fryer systems. It works by converting heat from the pilot flame into electrical energy, which powers the gas valve and maintains proper burner operation without requiring an external power source. The included adaptor supports secure installation and connection. Benefits include dependable low-voltage power generation, improved ignition reliability, enhanced safety through steady gas valve control, and durable construction suited for high-temperature environments, making it a practical replacement component for maintaining efficient fryer performance.

Category:

Tag: #Pitco #P8901-64 #Thermopile

Description: The Pitco PT60125401 fryer thermostat RX is a replacement temperature control component featuring a 3/8" x 5" sensing bulb and a 36" capillary tube for compatible fryer systems. It works by sensing the oil temperature through the bulb immersed in the fry pot and transmitting thermal changes via the capillary to regulate the heating source, cycling it on or off to maintain the selected setting. This controlled response helps prevent overheating and temperature drops. Benefits include stable cooking performance, improved food quality, enhanced operational safety, and durable construction suitable for demanding commercial kitchen environments.

Category:

Tag: #Pitco #PT60125401 #FryerThermostat

Description: The Pitco 60124501 fryer thermostat RX features a 3/8" x 5" sensing bulb with a 36" capillary, designed to regulate heat in compatible fryer systems. It works by sensing the oil temperature through the bulb and transmitting that information via the capillary tube to control the gas valve or heating element, cycling heat on and off to maintain the selected setting. This precise regulation helps prevent overheating or underheating. Benefits include improved temperature stability, enhanced food quality, reliable safety control, and durable construction suited for high-heat environments, making it a practical replacement component for dependable fryer operation.

Category:

Tag: #Pitco #60124501 #FryerThermostat

Description: The Pitco PT60059302 drain line sleeve gasket measures 2-7/8" x 2" and is designed to fit within compatible fryer drain connections. It works by forming a tight barrier between mating drain components, compressing under installation to block gaps where oil or liquid could escape. This seal supports proper drainage and helps maintain a clean and safe workspace. Benefits include reduced risk of leaks, improved equipment reliability, durable material performance under high-temperature conditions, and straightforward replacement, making it a practical component for maintaining efficient and safe fryer drainage systems in commercial kitchens.

Category:

Tag: #Pitco #PT60059302 #DrainLineSleeveGasket

Description: The Pitco PTB8046101 fryer gas burner measures 11 inches and is designed as a replacement heating component for compatible commercial fryers. It works by mixing gas and air to create controlled combustion, producing a steady flame that heats the fryer’s heat exchanger or oil vat. This direct heat transfer helps maintain proper oil temperatures for consistent cooking results. Benefits include dependable heat output, durable construction for high-temperature environments, improved temperature stability, and reliable compatibility with designated equipment, making it a practical component for maintaining efficient and consistent frying performance in commercial kitchens.

Category:

Tag: #Pitco #PTB8046101 #FryerBasketFrontHook

Description: The Pitco P6072143 fryer basket with front hook measures 13" x 12-1/4" x 5-3/8" and is designed for use in compatible commercial fryers. It works by holding food products securely while allowing hot oil to circulate evenly around them, promoting uniform cooking. The integrated front hook enables the basket to rest on the fryer ledge for draining excess oil after cooking. Benefits include durable construction for high-temperature environments, efficient oil drainage, consistent frying results, and reliable fitment, making it a practical replacement component for maintaining smooth and productive fryer operation in commercial kitchens.

Category:

Tag: #Pitco #P6072143 #FryerBasketFrontHook

Description: The TRUE 979439 refrigerator reel retriever door closer features a 2.0 lb pull rating and is designed to gently draw the door closed after it has been opened. It works through a spring-loaded reel mechanism that retracts when the door is opened and gradually pulls the door back to the closed position once released. This controlled action helps reduce the risk of doors being left ajar. Benefits include improved temperature retention, reduced energy loss, decreased compressor strain, and enhanced food safety, making it a practical component for maintaining reliable refrigeration performance in commercial settings.

Category:

Tag: #TRUE #979439 #RefrigeratorReelRetrieverDoorCloser

Description: The TRUE E810804 refrigerator door gasket in black measures 28-1/8" wide by 54-1/8" and is designed as a replacement seal for compatible units. It works by pressing firmly against the cabinet frame when the door closes, while an integrated magnetic strip helps keep the gasket securely aligned to minimize air gaps. By reducing warm air infiltration and preventing cold air loss, it supports consistent internal temperatures. Benefits include improved energy efficiency, reduced compressor workload, enhanced food preservation, and straightforward installation, making it a practical solution for maintaining dependable refrigeration performance in commercial environments.

Category:

Tag: #TRUE #E810804 #RefrigeratorDoorGasketBlack

Description: The TRUE E810805 door gasket in black measures 20-3/4" x 30" and is designed as a replacement seal for compatible refrigeration units. It works by forming a tight barrier between the door and cabinet frame, with an integrated magnetic strip that holds the gasket securely in place when the door is closed. This seal helps prevent warm air infiltration and reduces cold air loss. Benefits include improved energy efficiency, enhanced temperature stability, reduced strain on the cooling system, and straightforward installation, making it a practical component for maintaining reliable and efficient commercial refrigeration performance.

Category:

Tag: #TRUE #E810805 #DoorGasketBlack

Description: The TRUE E810772 refrigeration 4-sided magnetic gasket measures 24-3/4" x 63-1/4" and is designed to create a tight seal around compatible refrigerator doors. It works by using an embedded magnetic strip along all four sides to firmly adhere to the metal cabinet frame when the door is closed, reducing air leaks and helping retain cold air inside the unit. This effective seal supports stable internal temperatures and proper food storage conditions. Benefits include improved energy efficiency, reduced compressor cycling, enhanced temperature consistency, and straightforward replacement, making it a practical component for maintaining reliable commercial refrigeration operation.

Category:

Tag: #TRUE #E810772 #RefrigerationSidedMagnetic

Description: The True E810810 refrigerator door gasket is a black replacement seal measuring 26-1/2" x 26-1/2", designed for compatible refrigeration units. It works by pressing firmly against the cabinet frame when the door closes, while its integrated magnetic strip secures the seal to prevent warm air from entering and cold air from escaping. This barrier supports consistent internal temperatures and proper food storage conditions. Benefits include improved cooling efficiency, reduced strain on the compressor, enhanced temperature retention, and straightforward installation, making it a practical solution for restoring reliable sealing performance in commercial refrigeration equipment.

Category:

Tag: #True #E810810 #RefrigeratorDoorGasketBlack

Description: The TRUE 800320 refrigerator temperature range control features a slot stem with knob and a 24.5-inch capillary, offering an adjustable range of 16.5° to 44.5°F for precise cooling management. It works by sensing internal cabinet temperature through the capillary tube and cycling the compressor on or off to maintain the selected setting. This responsive control helps regulate cooling performance based on operating conditions. Benefits include dependable temperature consistency, straightforward manual adjustment, reliable sensing accuracy, and compatibility with designated refrigeration units, making it a practical replacement component for maintaining proper cold storage conditions in commercial environments.

Category:

Tag: #TRUE #800320 #RefrigeratorTemperatureRangeControlSlotStemKnob

Description: The Garland 2200799 oven pilot assembly is a replacement component designed to supply a continuous flame that ignites the main burner when heat is required. It works by directing a controlled flow of gas through the pilot orifice, where it is ignited to maintain a small, consistent flame that activates the main burner upon demand. This consistent ignition source supports smooth burner startup and proper temperature control. Benefits include dependable lighting performance, improved operational safety, stable heat initiation, and compatibility with designated oven models, helping maintain efficient and consistent cooking performance in commercial kitchens.

Category:

Tag: #Garland #2200799 #OvenPilotAssembly

Description: The Garland 1027000 oven FPT gas safety valve features 3/8" inlet and outlet connections and includes 3/16" CCT reducer fittings for proper installation in compatible systems. It works by controlling the flow of gas to the burner and automatically shutting off the supply if the pilot flame is not detected, helping prevent unburned gas from accumulating. This safety mechanism supports consistent ignition and stable heating performance. Benefits include enhanced operational safety, reliable gas regulation, secure connection compatibility, and durable construction suited for commercial kitchen environments, making it a practical replacement component for maintaining proper oven functionality.

Category:

Tag: #Garland #1027000 #OvenFPTGasSafetyValveReducerFittings

Description: The Garland 4529434 range ignition control box is a 24V control module designed for use with natural or LP gas equipment. It works by receiving a low-voltage signal to initiate the ignition sequence, generating a spark at the burner while monitoring flame presence to ensure proper ignition. If a flame is not detected, the control interrupts the gas flow to support safe operation. Benefits include consistent burner ignition, enhanced safety through flame monitoring, compatibility with multiple gas types, and dependable performance in commercial kitchen environments, making it an essential component for maintaining efficient and secure range functionality.

Category:

Tag: #Garland #4529434 #RangeIgnitionControlBoxNatural

Description: The Garland 2140 DPDT switch is a three-position, double-pole double-throw switch measuring 7/8" by 1-1/2", designed for use in compatible commercial kitchen equipment. It works by allowing the operator to toggle between three distinct positions, directing electrical current across two separate circuits simultaneously for controlled function changes. This configuration supports flexible control of components such as motors or heating elements. Benefits include dependable switching performance, clear position selection, durable construction suited for frequent use, and straightforward integration into existing control panels, making it a practical replacement part for maintaining consistent and accurate equipment functionality.

Category:

Tag: #Garland #2140 #SwitchPosition #Garlandparts

Description: The Garland G01296-1 1/2" red dome signal light with 10" leads is a compact indicator light designed for commercial cooking equipment. It works by illuminating when connected to an energized circuit, signaling that a specific function such as heating or power is active. The red dome lens enhances visibility, while the attached 10-inch leads allow for straightforward electrical connection during installation or replacement. Benefits include quick at-a-glance status confirmation, reliable performance in demanding kitchen environments, and simplified maintenance, helping operators monitor equipment operation efficiently and maintain safe, consistent workflow.

Category:

Tag: #Garland #G01296-1 #RedDomeSignalLightLeads

Description: The Garland 1936103 range amber lamp indicator is a 28-volt signal light designed to illuminate when connected circuits are energized. It works by receiving electrical power from the control system and emitting an amber light to indicate active operation, such as when a burner or heating function is engaged. This visual cue helps operators quickly confirm equipment status at a glance. Benefits include improved operational awareness, dependable low-voltage performance, straightforward installation, and durable construction suited for commercial kitchen environments, making it a practical replacement component for maintaining clear and reliable equipment monitoring.

Category:

Tag: #Garland #1936103 #GarlandRangeAmberLampIndicator

Description: The Garland CK2200211 high-tension wire lead is a 12-inch electrical lead designed to carry high-voltage current from the ignition source to the burner electrode in compatible gas equipment. It works by safely transmitting the electrical pulse needed to create a spark at the burner, enabling proper ignition of the gas-air mixture. The insulated construction helps contain voltage and protect surrounding components from electrical interference. Benefits include dependable spark delivery, improved ignition reliability, resistance to heat and wear in commercial environments, and straightforward replacement, making it a practical component for maintaining safe and consistent burner operation.

Category:

Tag: #Garland #CK2200211 #HighTensionWireLead

Description: The Garland 30Z1177 20A fuse is a replacement electrical safety device designed to guard compatible equipment against damage caused by overcurrent or short circuits. It works by containing a calibrated metal element that melts when the current exceeds 20 amps, breaking the circuit and stopping power to prevent overheating or component failure. Once triggered, the fuse can be replaced to restore operation. Benefits include reliable circuit protection, reduced risk of electrical damage, support for safe equipment performance, and straightforward installation, making it an essential component for maintaining proper electrical safety in commercial kitchen systems.

Category:

Tag: #Garland #30Z1177 #Fuse #Garlandparts

Description: The Garland CK4528835 open top knob assembly is a replacement control component designed for GT and UT series units, allowing operators to adjust heat levels with accuracy and ease. It works by securely fitting onto the valve stem and transmitting the user’s rotational input to regulate the flow of gas to the burner. This direct control helps maintain consistent flame output and temperature settings during operation. Benefits include smooth handling, clear setting adjustments, durable construction for commercial environments, and restored functionality to worn or damaged controls, supporting safe and efficient daily use in professional kitchen equipment.

Category:

Tag: #Garland #CK4528835 #OpenTopKnobAssembly

Description: The Garland GL1035197 range steel infrared burner is a heavy-duty burner assembly measuring 15 inches by 6-1/4 inches and featuring 1.5-inch extensions for proper positioning within compatible range units. It works by mixing gas and air to create combustion that heats the burner surface, which then radiates infrared energy directly to the cooking area for even heat distribution. This method promotes responsive heating and steady temperature control. Benefits include durable steel construction, reliable heat transfer, uniform cooking performance, and compatibility with designated equipment, making it a practical replacement component for maintaining dependable range operation in commercial kitchens.

Category:

Tag: #Garland #GL1035197 #SteelInfraredBurner #Garlandparts

Description: The Garland G01408 steel infrared burner is a range burner assembly measuring 15 inches by 6-1/4 inches and designed with 1.5-inch extensions for proper installation in compatible equipment. It operates by combining gas and air to produce combustion that heats the burner surface, which then emits infrared energy to deliver even, direct heat to the cooking area. This heating method supports steady temperature output and responsive performance. Benefits include durable steel construction, uniform heat distribution, efficient energy transfer, and reliable operation under commercial conditions, making it a practical replacement component for maintaining controlled and consistent cooking results.

Category:

Tag: #Garland #G01408 #SteelInfraredBurner

Description: The Garland CK1035197 range steel infrared burner is a heavy-duty burner assembly measuring 15 inches by 6-1/4 inches and equipped with 1.5-inch extensions for proper fit within compatible range units. It works by mixing gas and air to create combustion that heats the burner surface, which then emits infrared energy to transfer intense, even heat directly to the cooking area. This method supports rapid heat response and uniform temperature distribution. Benefits include durable steel construction, reliable heat output, efficient energy transfer, and compatibility with designated range systems, making it a practical replacement component for maintaining steady and controlled cooking operations.

Category:

Tag: #Garland #CK1035197 #SteelInfraredBurner

Description: The Garland 4530036 90VDC Linear Actuator, 3300 RPM, 1.5A is an electromechanical device designed to convert electrical energy into straight-line motion within commercial kitchen or industrial equipment. It operates using a DC motor that drives an internal screw mechanism, allowing the actuator to extend or retract components with controlled speed and force. This process supports accurate positioning and smooth mechanical adjustments during operation. The actuator helps maintain consistent performance, supports reliable automation functions, and assists in reducing manual intervention. Its compact design allows straightforward installation while providing stable motion control, making it a practical component for maintaining efficient and consistent equipment functionality.

Category:

Tag: #Garland #4530036 #LinearActuator #Garlandparts

Description: The Star Mfg 2NZ11215 oven heating element is an electric resistance component rated at 800 watts and designed for operation on 208 volts in compatible commercial ovens. It works by converting electrical energy into heat as current flows through the internal resistance wire, radiating thermal energy evenly throughout the oven cavity to maintain the desired temperature. This steady heat production supports uniform cooking and baking results. Benefits include dependable heat generation, efficient operation within its rating, straightforward replacement, and durable construction suited for commercial environments, making it a practical component for maintaining consistent oven performance and temperature control.

Category:

Tag: #StarMfg #2NZ11215 #OvenHeatingElement #StarMfgparts

Description: The Star Mfg WS506921 oven cast iron charbroiler is a heavy-duty cooking grate measuring 19 inches by 3-11/16 inches, designed for use in compatible oven or broiler assemblies. It works by absorbing and retaining heat from the burner or heating source, then distributing that heat evenly across the cooking surface for controlled cooking. The cast iron construction helps maintain steady temperatures during use while allowing excess grease to drain away. Benefits include dependable heat retention, even cooking performance, resistance to warping under high temperatures, making it a practical replacement component for commercial cooking equipment.

Category:

Tag: #StarMfg #WS506921 #OvenCastIronCharbroiler

Description: The Star Mfg 2K-0877500 range gas valve is a manual gas control component designed with a push-to-turn stem and threaded connections from a 1/8-inch NPT inlet to a 3/8-inch–27 outlet. It works by requiring inward pressure while turning the stem to open the valve, helping reduce accidental activation and allowing gas to flow to the burner during use. Turning the stem to the off position stops gas flow. Benefits include improved operational safety, precise gas regulation, secure threaded installation, and durable construction suited for commercial kitchen environments.

Category:

Tag: #StarMfg #2K-0877500 #RangeGasValvePushTurnStem

Description: The Star Mfg 2E-200542 hi-limit thermostat is a manual-reset safety control designed to interrupt electrical power when temperatures exceed 190°F. It operates by monitoring temperature at the sensing point and opening the circuit once the preset limit is reached, stopping heat output until the unit is manually reset. The component features two 1/4-inch tab terminals and dual mounting holes for secure installation. Benefits include dependable safety protection, clear manual reset for fault identification, secure electrical connections, and durable construction suited for commercial environments, making it a practical safety component for maintaining controlled operation and protecting heating equipment.

Category:

Tag: #StarMfg #2E-200542 #LimitTypeManualResetHoles #StarMfgparts

Description: The Star Mfg Z5958 SA thermostat is a mechanical temperature control designed to regulate heat within a 100–450°F operating range. It works by sensing temperature changes through its internal mechanism and opening or closing electrical contacts to cycle power to the heating element as needed to maintain the selected setpoint. This responsive control helps prevent overheating while supporting stable operation. Benefits include accurate temperature control across a wide range, straightforward manual adjustment, reliable performance without complex electronics, and durable construction suited for routine commercial use, making it a practical replacement component for maintaining consistent and controlled heating operation.

Category:

Tag: #StarMfg #Z5958 #Thermostat

Description: The Star Mfg 2R-Z1274 thermostat indicator knob is a black control knob designed with a red indicator line, integrated stop screw and stud, and a 2-1/4-inch diameter for precise manual control. It mounts on a .187-inch shaft and works by rotating the connected thermostat shaft to adjust temperature settings within a defined range, with the stop feature helping limit over-rotation. This design allows operators to easily identify and repeat settings. Benefits include clear visual indication, controlled adjustment, secure mounting, and durable construction, making it a practical replacement knob for maintaining reliable and user-friendly temperature control.

Category:

Tag: #StarMfg #2R-Z1274 #BlackThermostatIndicatorKnobRedLinewithStopScrew

Description: The Bunn 38708.1000 control board kit is an electronic control assembly designed to manage key operating functions such as timing, heating, and system sequencing. It works by receiving input signals from sensors and switches, then processing those signals to regulate electrical output to connected components according to programmed parameters. This coordination helps maintain proper operation and performance during each cycle. Benefits include dependable system control, improved consistency during use, accurate response to operating conditions, and simplified replacement during service or repairs, making it a practical solution for maintaining reliable equipment functionality and minimizing operational disruptions.

Category:

Tag: #Bunn #38708.1000 #ControlBoardKit

Description: The Bunn 03260.0005 S type faucet is a dispensing valve designed with a 3/4-inch male connection for secure installation on compatible hot water tanks or brewers. It operates by opening and closing an internal valve mechanism when the handle is engaged, allowing hot water to flow smoothly and shut off reliably when released. This design supports consistent portion control during use. Benefits include durable construction for frequent operation, smooth dispensing action, secure threaded connection, and ease of replacement, making it a practical component for maintaining efficient and reliable hot water service in commercial foodservice environments.

Category:

Tag: #Bunn #03260.0005 #TypeFaucetMaleConnection #Bunnparts

Description: The Imperial 1101 dial is a mechanical control dial designed with Off, Low, 150–400, and High settings for adjusting operating temperature ranges. It works by rotating the dial to align the desired setting with the control indicator, which adjusts the connected thermostat or control mechanism accordingly. This simple interface allows operators to easily select and repeat preferred temperature levels during operation. Benefits include straightforward temperature adjustment, clear markings for accurate setting selection, durable construction for regular use, and improved operational consistency, making it a practical control component for maintaining reliable and user-friendly temperature management in commercial cooking equipment.

Category:

Tag: #Imperial #1101 #Dial

Description: The Hatco 02.19.019.00 infinite control kit is an electrical control component rated for 240 volts and 13 amps, designed to regulate heating output in compatible commercial equipment. It operates by cycling electrical power to the heating element at variable intervals, allowing operators to adjust heat levels gradually rather than using fixed on and off settings. This method supports more precise temperature management during operation. Benefits include improved heat control flexibility, dependable electrical performance, reduced temperature fluctuation, and straightforward installation, making it a practical replacement kit for maintaining stable and controlled heating operation in commercial environments.

Category:

Tag: #Hatco #02.19.019.00 #InfiniteControlKit #Hatcoparts

Description: The Hatco 02.03.032.02 T-Tron space-saver fuse is a compact electrical protection device rated for 50 amps at 300 volts, designed for use in commercial equipment with limited panel space. It works by melting its internal element when current exceeds safe levels, quickly opening the circuit to prevent damage to wiring, components, or connected equipment. This fast-acting response helps reduce the risk of electrical faults and downtime. Benefits include dependable overcurrent protection, compact space-saving design, consistent performance under load, and straightforward replacement, making it a practical component for maintaining electrical safety and reliable operation in commercial applications.

Category:

Tag: #Hatco #02.03.032.02 #TronSpaceSaverFuse #Hatcoparts

Description: The Hatco 02.08.031D.00 heating element is an electric resistance component rated at 250 watts and designed for operation on 120 volts in compatible commercial equipment. It works by converting electrical energy into heat as current passes through the element, delivering controlled and consistent thermal output during operation. This process helps maintain proper temperatures for warming or holding applications without excessive fluctuation. Benefits include dependable heat generation, efficient performance within its power rating, straightforward replacement during maintenance, and durable construction suited for routine commercial use, making it a practical component for maintaining consistent heating and overall equipment reliability.

Category:

Tag: #Hatco #02.08.031D.00 #HeatingElement #Hatcoparts

Description: The Hatco 02.05.006.00 water heating element is an electric resistance component measuring 5 inches in diameter and 5 inches in height, designed with terminals for secure electrical connection. It operates by converting electrical energy into heat as current passes through the element, transferring thermal energy directly to the surrounding water to maintain the desired temperature. This controlled heating process supports steady operation during use. Benefits include reliable heat output, efficient water heating within its design range, straightforward installation, and durable construction suited for commercial environments, making it a practical replacement part for maintaining proper water temperature and overall equipment functionality.

Category:

Tag: #Hatco #02.05.006.00 #WaterHeatingElementterminals #Hatcoparts

Description: The Hatco 02.05.002.00 cartridge heater is a compact electric heating element measuring 5-5/8 inches in length and equipped with electrical terminals and 3/8-inch FPT by 1/2-inch MPT threaded connections for secure installation. It works by converting electrical energy into heat as current passes through the internal resistance element, delivering focused heat to the surrounding component or fluid. This design supports efficient heat transfer within confined spaces. Benefits include dependable heating output, secure threaded mounting, straightforward replacement, and durable construction suited for routine commercial use, making it a practical component for maintaining consistent equipment operation.

Category:

Tag: #Hatco #02.05.002.00 #CartridgeHeaterTerminals #Hatcoparts

Description: The Hatco 02.19.162.00 drain switch is an electrical control component designed to activate or deactivate draining mechanisms in compatible commercial equipment. It works by opening or closing the electrical circuit when engaged, allowing operators to control when draining occurs during cleaning or maintenance procedures. This controlled switching helps prevent accidental operation and supports proper workflow. Benefits include dependable electrical performance, straightforward operation, improved control during service tasks, and durable construction suited for commercial environments, making it a practical replacement part for maintaining safe, organized, and efficient equipment operation.

Category:

Tag: #Hatco #02.19.162.00 #DrainSwitch

Description: The Hatco 02.16.039.00 temperature control is a mechanical control component designed to regulate heat by monitoring temperature changes and cycling electrical power to the heating element as needed. It operates through an internal sensing mechanism that opens or closes contacts to maintain the selected temperature range during use. This controlled operation helps prevent overheating while supporting stable and efficient performance. Benefits include reliable temperature regulation, straightforward adjustment, consistent operation without electronic complexity, and durable construction suited for routine commercial environments, making it a practical replacement part for maintaining proper temperature control and overall equipment reliability.

Category:

Tag: #Hatco #02.16.039.00 #TemperatureControl #Hatcoparts

Description: The Hatco 02.16.066.00 EGO thermostat is a mechanical temperature control component designed with 1/4-inch terminals and a D-shaped stem with a flat left orientation for precise knob alignment. It works by sensing temperature changes and opening or closing internal electrical contacts to regulate power to the heating element, helping maintain the selected temperature setting. This responsive control helps prevent overheating while supporting steady performance. Benefits include dependable temperature regulation, straightforward installation, compatibility with standard control knobs, and durable construction suited for commercial environments, making it a practical replacement part for maintaining reliable temperature management and overall equipment functionality.

Category:

Tag: #Hatco #02.16.066.00 #EGOThermostat #Hatcoparts

Description: The Hatco 02.08.017D.00 heating element is an electric resistance component rated at 1275 watts and designed for operation on 208 volts in compatible commercial equipment. It works by converting electrical energy into heat as current passes through the element, providing steady and controlled thermal output during operation. This process supports proper temperature maintenance for warming or holding applications. Benefits include reliable heat generation, efficient energy use within its rating, straightforward replacement, and durable construction suited for routine commercial use, making it a practical component for maintaining consistent heating performance and overall equipment functionality.

Category:

Tag: #Hatco #02.08.017D.00 #HeatingElement #Hatcoparts

Description: The Hatco 02.19.215.00 green light rocker switch is an electrical control component rated for 10 amps at 250 VAC and equipped with 1/4-inch tab terminals for secure wiring connections. It works by rocking between on and off positions to open or close the electrical circuit, while the integrated green indicator light illuminates when power is active. This dual function helps operators quickly confirm equipment status. Benefits include dependable electrical switching, easy installation, clear visual feedback, and durable construction suited for commercial environments, making it a practical replacement switch for maintaining consistent and user-friendly equipment control.

Category:

Tag: #Hatco #02.19.215.00 #GreenLightRockerSwitch #Hatcoparts

Description: The Hobart 104076 valve is a mechanical control component designed with 1/8-inch MPT by 3/8-inch–27 threaded connections for secure integration into compatible systems. It operates by manually opening or closing an internal passage to regulate flow during start-up, operation, or shutdown. This straightforward mechanism supports consistent performance while helping prevent unwanted leaks. Benefits include dependable flow regulation, secure threaded installation, ease of use, and durable construction suited for routine commercial applications, making it a practical replacement part for maintaining proper system control and overall equipment reliability.

Category:

Tag: #Hobart #104076 #Valve

Description: The Hobart 19197 top burner valve is a manual gas control component designed with an OFF/ON function and 1/8-inch MPT by 3/8-inch–27 threaded connections for integration into burner assemblies. It works by opening or closing the internal valve mechanism to allow or stop gas flow to the burner as needed during operation. This simple control helps manage ignition and shutdown processes safely. Benefits include reliable gas regulation, secure threaded connections, easy manual operation, and durable construction suited for commercial cooking environments, making it a practical replacement part for maintaining proper burner control and equipment safety.

Category:

Tag: #Hobart #19197 #TopBurnerValve

Description: The Hobart 00-124751-00003 stainless steel tooth brass gear is a precision mechanical component designed for use in 29-size mixers, featuring a 2-3/8-inch diameter and an integrated keyway for secure shaft alignment. It works by meshing with mating gears to transmit rotational motion from the motor to internal mixer components, maintaining controlled speed and torque during operation. The keyway helps prevent slippage under load. Benefits include consistent mixing performance, reduced wear through proper gear engagement, durable metal construction, and dependable fit, making it a practical replacement part for maintaining efficient and reliable mixer operation.

Category:

Tag: #Hobart #00-124751-00003 #MixerStainlessSteelToothBrassGearKeyway #Hobartparts

Description: The Hobart 00-280984-00003 R-type grey door gasket is a flexible sealing component designed to fit doors with an opening measuring 24-3/8 inches by 60-11/16 inches. It works by compressing evenly between the door and cabinet when closed, forming a tight barrier that reduces air and moisture leakage. This sealing action helps maintain internal conditions while supporting consistent equipment performance. Benefits include improved temperature retention, reduced energy loss, protection against leaks, and durable material designed for repeated opening and closing, making it a practical replacement part for maintaining efficient and reliable operation.

Category:

Tag: #Hobart #00-280984-00003 #TypeGreyDoorGasket #Hobartparts

Description: The Hobart 358516-1 two-speed motor is a 1/3 HP, single-phase electric motor designed to operate at 1725 or 1140 RPM, allowing equipment to run at different speeds based on operational needs. It works by switching between motor windings to deliver the selected speed while maintaining stable output under load. Rated at 5.6/2.2 amps and operating on 115 volts, it supports consistent power delivery during use. Benefits include adaptable performance, reliable motor operation, efficient speed control, and durable construction suited for commercial environments, making it a practical replacement for maintaining proper functionality and operational control.

Category:

Tag: #Hobart #358516-1 #Motor #Hobartparts

Description: The Hobart 353613-1 temperature control is a mechanical control component designed to monitor and regulate operating temperatures in commercial kitchen equipment. It works by sensing temperature changes and activating internal switching contacts to cycle heating elements or related components on or off as needed to maintain the selected setting. This controlled response helps prevent overheating while supporting stable operation. Benefits include dependable temperature management, straightforward adjustment, consistent performance without complex electronics, and durable construction suited for daily commercial use, making it a practical replacement part for maintaining reliable and controlled temperature operation across compatible equipment.

Category:

Tag: #Hobart #353613-1 #Temperature Control #Hobartparts

Description: The Hobart 00-906410 pump seal is a precision sealing component designed for dishwasher pumps with a 5/8-inch outside diameter shaft. It works by forming a tight barrier between the rotating pump shaft and stationary housing, keeping water contained within the pump while allowing smooth shaft movement during operation. This sealing action helps maintain proper water pressure and protects surrounding components from moisture exposure. Benefits include reduced risk of leaks, protection of motor and pump parts, consistent pump performance, and extended equipment service life, making it a practical replacement part for maintaining dependable and efficient dishwasher operation.

Category:

Tag: #Hobart #00-906410 #DishwasherPumpSeal #Hobartparts

Description: The Hobart 913067 meat grip is a mechanical accessory designed to hold meat securely in place on compatible food preparation equipment. It works by applying consistent pressure to the product, keeping it stable and properly aligned as it is guided toward the cutting area. This controlled positioning helps reduce product movement while limiting direct hand contact near blades. Benefits include improved operator safety, more consistent slicing results, better control of uneven or soft products, and durable construction suited for routine commercial use. It serves as a practical replacement component for maintaining efficient, precise, and safe meat processing operations.

Category:

Tag: #Hobart #913067 #MeatGrip

Description: The Hobart 00-712001-000A2 cast iron burner is a complete burner assembly designed with integrated heat shields and an adjustable air shutter, measuring 13-1/4 inches long by 4-1/4 inches wide. It operates by combining gas flow with regulated combustion air through the air shutter, producing a controlled flame that distributes heat evenly across the cooking surface. The heat shields help protect surrounding components while supporting stable operation. Benefits include durable cast iron construction, consistent heat distribution, adjustable airflow for proper combustion, and dependable performance under routine kitchen use, making it a practical replacement component for maintaining efficient and controlled cooking operations.

Category:

Tag: #Hobart #00-712001-000A2 #CastIronBurnerShields

Description: The Hobart 00-417258-000G1 front burner assembly is a cast iron burner base designed for commercial cooking equipment, featuring a 4-3/8-inch top opening and an adjustable air shutter, supplied without the burner head. It works by allowing gas to flow into the burner body while the air shutter regulates the amount of combustion air mixed with the gas before ignition. This balance helps produce a steady, efficient flame during operation. Benefits include durable cast iron construction, adjustable airflow for proper combustion, dependable heat distribution, and compatibility with standard burner components, making it a practical replacement for maintaining consistent cooking performance.

Category:

Tag: #Hobart #00-417258-000G1 #FrontBurnerAssemblyCastIron

Description: The Hobart 1929800 safety valve is a gas control component designed with a magnet head and 1/4-inch CCT with 3/8-inch NPT connections for integration into gas systems. It operates by using a thermally generated electrical signal to hold the valve open during normal operation, allowing gas flow to the burner. If the pilot flame is lost, the magnetic hold releases and the valve closes to stop gas flow. Benefits include dependable flame safety control, secure gas regulation, compatibility with standard fittings, and durable construction suited for routine commercial use.

Category:

Tag: #Hobart #1929800 #SafetyValveMagnetHead #Hobartparts

Description: The Hobart 00-087714-042-1 dishwasher relay is an electromechanical control component designed for use in 120-volt systems to manage power delivery to key dishwasher functions. It works by receiving a control signal that energizes an internal coil, causing the relay contacts to open or close across six tab terminals and direct electrical current to components such as pumps, heaters, or motors. This controlled switching supports proper sequencing during operation. Benefits include dependable performance, organized and secure terminal connections, consistent electrical control, and ease of replacement, making it a practical solution for maintaining normal dishwasher functionality and system reliability.

Category:

Tag: #Hobart #00-087714-042-1

Description: The Hobart 11335 coaxial thermopile is a heat-activated electrical component designed to generate 250–750 millivolts when exposed to a pilot flame. With a 36-inch coaxial lead, it converts thermal energy into electrical current that signals the gas valve to remain open during normal operation. If the pilot flame goes out, the loss of voltage causes the gas supply to close, supporting safe shutdown. Benefits include reliable flame sensing, stable power output without external electricity, durable construction for commercial environments, and straightforward replacement, making it a practical part for maintaining proper gas control and equipment safety.

Category:

Tag: #Hobart #11335 #CoaxialThermopile

Description: The Hobart 00-497301-00001 thermopile is a flame-sensing electrical component designed to produce 250–750 millivolts when heated by a standing pilot flame. Featuring a 36-inch lead with two-wire output, it converts thermal energy from the flame into electrical current that signals the gas valve to remain open during normal operation. If the pilot flame is lost, voltage drops and the gas supply is shut off as a safety measure. Benefits include dependable flame monitoring, improved operational safety, mechanical operation without external power, and durable construction suited for commercial kitchen environments.

Category:

Tag: #Hobart #00-497301-00001 #ThermopileLead

Description: The Hobart ML16225Z disc holder is a mechanical accessory designed to position and hold compatible slicing or shredding discs in place within food preparation equipment. It works by locking the disc securely onto the drive hub, allowing the machine’s motor to rotate the disc evenly during operation. This stable connection helps maintain proper alignment while reducing vibration and movement. Benefits include improved cutting consistency, safer operation through secure disc placement, reduced wear on discs and drive components, and straightforward installation and removal, making it a practical replacement part for maintaining reliable performance in commercial food processing applications.

Category:

Tag: #Hobart #ML16225Z #DiscHolder

Description: The Hobart 01-234301-97200 carbon block water filter is a single-pack replacement cartridge designed to remove chlorine, sediment, and unpleasant tastes or odors from water supplies. It works by directing water through a compressed activated carbon block that captures fine particles and chemical contaminants as water flows through the filter media. This process helps deliver cleaner water to connected equipment while limiting scale and residue buildup on internal components. Benefits include better water clarity, improved taste and odor control, protection of valves and fittings, and easy replacement during routine service, making it a practical solution for maintaining reliable performance .

Category:

Tag: #Hobart #01-234301-97200 #CarbonBlockWaterFilter

Description: The Broaster 10800 fryer motor and pump assembly features a 1/3 HP single-phase motor paired with an integrated pump to move cooking oil through filtration or transfer systems. Operating at 1425/1725 RPM, it drives oil through connected lines via 1/2-inch FPT ports, helping remove food particles and maintain oil condition. The unit supports both 115V and 230V power options, allowing flexible installation in different kitchen setups. Benefits include consistent oil flow, stable motor performance, compatibility with standard fryer systems, and durable construction suited for commercial environments, making it a practical solution for maintaining efficient fryer operation.

Category:

Tag: #Broaster #10800 #HPFryerMotorPumpAssembly

Description: The TEC SPGRID broiler top grate is a cast iron grate featuring three cross bars and eleven ribs, sized at 24 inches by 6 inches to fit compatible broiler units. It functions by absorbing heat from the burner and evenly distributing it across the ribbed surface, allowing food to cook uniformly while maintaining proper airflow. The rib design also helps channel grease away from the heat source during cooking. Benefits include reliable heat retention, steady cooking performance, resistance to warping under high temperatures, and long-lasting cast iron construction, making it a practical replacement component for maintaining consistent broiler operation in commercial kitchens.

Category:

Tag: #TEC #SPGRID #BroilerTopGrateCrossBarsRibsCastIron

Description: The Dean 5E5FF20CECF1 fryer filter pump is a compact mechanical pump designed to move hot cooking oil through a filtration system at a flow rate of up to 5 gallons per minute. It operates by drawing oil from the fryer, pushing it through filter media to remove food particles and sediment, and returning the cleaned oil back to the fryer. With 1/2-inch FPT connections, a 4-3/4-inch wide housing, and protective plastic plugs, it supports straightforward installation and servicing. Benefits include cleaner oil, reduced buildup, consistent pump performance, and improved fryer efficiency during regular cleaning cycles.

Category:

Tag: #Dean #5E5FF20CECF1 #FryerFilterPumpPlasticPlugs

Description: The Dean 8030031 tube screen is a metal screen designed for use inside commercial fryers, with overall dimensions of 17-1/2 inches by 17-1/2 inches. It functions by covering the heat tube area, allowing hot oil to circulate freely while blocking food particles and sediment from settling on critical surfaces. This helps reduce buildup that can interfere with heat transfer and routine maintenance. Benefits include improved equipment protection, more consistent heating performance, easier cleaning, and extended service life of internal fryer components, making it a practical part for daily fryer operation.

Category:

Tag: #Dean #8030031 #TubeScreen #Deanparts

Description: The Dean 2609 fry basket is a durable metal basket designed for commercial fryers, measuring 17-1/8 inches by 8-1/4 inches and equipped with a front handle for controlled handling. During operation, the basket holds food portions while they are lowered into hot oil, allowing even exposure for consistent cooking. Once lifted, the open-wire construction enables excess oil to drain back into the fryer. Benefits include consistent cooking results, easier portion management, safe handling during loading and unloading, and sturdy construction suited for frequent use, making it a practical accessory for maintaining efficient and orderly frying operations.

Category:

Tag: #Dean #2609 #FryBasket #Deanparts

Description: The Dean 8100617 pilot generator is a thermoelectric safety component designed to produce a small electrical current when heated by the pilot flame. As the pilot remains lit, the generated current signals the gas valve to stay open, allowing normal burner operation. If the flame is extinguished, the loss of current causes the gas supply to shut off, helping prevent unsafe conditions. Benefits include dependable flame monitoring, improved operational safety, simple mechanical operation without external power, and durable construction suited for commercial kitchen environments,making it a practical replacement part for maintaining proper fryer performance and safety control.

Category:

Tag: #Dean #8100617 #FryersPilotGenerator #Deanparts

Description: The Dean 8071692 fryer thermostat is a mechanical temperature control designed to regulate fryer heat within a 200–375°F operating range using a capillary sensing system. A 5/16-inch by 5-inch sensing bulb and 24-inch capillary tube detect changes in oil temperature and mechanically actuate internal contacts to cycle the heating system on or off as needed. This process helps maintain the selected setpoint without relying on electronic components. Benefits include dependable temperature regulation, simple manual adjustment, durable construction for commercial kitchen use, and straightforward installation, making it a practical choice for maintaining consistent cooking performance and equipment reliability.

Category:

Tag: #Dean #8071692 #FryerThermostatCapillary

Description: The Dean 8262024 igniter cable is a right-angle lead designed to carry electrical current from the control system to the igniter through a single spade connector. Its 90-degree elbow design allows for efficient routing in limited spaces while helping minimize stress on the connection point. When power is applied, the cable transmits current reliably to enable proper ignition. Benefits include secure connectivity, reduced wear caused by tight bends, durable insulation for operational environments, and straightforward installation, making it a practical replacement component for maintaining safe, reliable ignition performance.

Category:

Tag: #Dean #8262024 #DegreeElbowIgniterCableSpadeConnector #Deanparts

Description: The Ranco A10-4493-000 thermostat is a capillary-style temperature control equipped with a straight sensing bulb and a 31-inch capillary tube that monitors temperature changes at the sensing point. As the temperature rises or falls, the fluid inside the bulb expands or contracts, mechanically actuating internal switch contacts to open or close the electrical circuit and maintain the selected setpoint. Adjustment is made through an integrated control knob, allowing straightforward manual control. Benefits include consistent performance without electronic components, durable construction for long-term use, simple installation, and dependable operation in demanding environments.

Category:

Tag: #Ranco #A10-4493-000 #ThermostatKnobStraightBulbCap

Description: The Parker Hannifin GP607 solenoid valve is a 3/4" FPT hot water valve designed to open or close fluid flow when energized by a 120/240V electrical signal. It works by activating an internal solenoid coil that moves the valve mechanism, allowing precise regulation based on system requirements. This controlled operation supports consistent performance in commercial and industrial applications where temperature and flow stability matter. Key benefits include reliable switching, compatibility with hot water conditions, and a durable design suited for continuous use. Its standard connection size also allows straightforward installation and integration into existing plumbing systems.

Category:

Tag: #ParkerHannifin #GP607 #SolenoidValveHotWater #ParkerHannifinparts

Description: The Parker Hannifin 04F20C3 solenoid valve is a 1/4" valve designed to regulate the movement of liquids or gases using a 120V electrical signal. It operates by energizing an internal solenoid coil that actuates the valve mechanism, allowing flow to open or close based on system demand. This controlled response supports consistent operation in commercial and industrial equipment. Benefits include dependable switching, compact sizing for easy integration, and stable performance under normal operating conditions. Its straightforward design helps reduce maintenance time while supporting efficient, repeatable system control.

Category:

Tag: #ParkerHannifin #04F20C3 #SolenoidValve #ParkerHannifinparts

Description: The Parker Hannifin G23 solenoid valve coil is an electrical component designed to energize compatible solenoid valves operating on 120/240V power. It works by converting electrical energy into a magnetic field, which activates the valve mechanism to open or close fluid or gas flow as required. This controlled operation supports consistent system performance and responsive flow regulation. Benefits include stable voltage compatibility, reliable switching, and reduced downtime when replacing worn coils. Its straightforward installation and dependable operation help maintain efficient equipment function while supporting routine maintenance needs without unnecessary complexity.

Category:

Tag: #ParkerHannifin #G23 #SolenoidValveCoi

Description: The Oliver Products 5749-8027 power relay is an electrical control device designed to manage circuits up to 25A at 277VAC in commercial food equipment. It works by using a low-power control signal to energize an internal coil, which opens or closes heavy-duty contacts to regulate power flow to motors, heaters, or other loads. This separation of control and load circuits helps protect sensitive components and improves system reliability. Available in black or tan housing, the relay supports consistent operation, reduces wear on switches, and helps maintain stable performance during normal equipment use and routine cycling.

Category:

Tag: #OliverProducts #5749-8027 #BlackorTanColorPowerRelay

Description: The Baxter 01-1000V9-00169 flame sensor is a safety component designed for commercial cooking and baking equipment to detect whether a burner flame is properly established. It works by sensing the electrical conductivity created when a flame is present and sending a signal to the control system to keep the gas valve open. If no flame is detected, the system shuts down gas flow to prevent unsafe operation. This process supports consistent heating, protects equipment from damage, and reduces the risk of gas-related issues. Its straightforward function helps maintain dependable performance during normal daily use.

Category:

Tag: #Baxter #01-1000V9-00169 #FlameSensor #Baxterparts

Description: The Johnson Controls V46DA-6D ice machine water regulator is a pressure-regulating valve designed to control condenser water flow based on system demand. It operates by sensing refrigerant or discharge pressure and automatically adjusting the water flow to maintain a set pressure range, ensuring proper heat rejection during operation. This controlled regulation helps prevent excessive water usage while supporting stable machine performance. Benefits include improved energy efficiency, reduced water consumption, and more consistent ice quality. Its straightforward mechanical operation supports dependable performance and helps protect system components from pressure-related stress in daily commercial use.

Category:

Tag: #JohnsonControls #V46DA-6D #IceMachineWaterRegulator

Description: The Johnson Controls H91CA-21D hot top valve is a pilot-operated gas control component designed to regulate fuel delivery with accuracy and reliability. It works by using 1/4" CCT pilot fittings to sense pilot flame conditions, allowing the valve to open or close gas flow as required for proper burner operation. This controlled process helps maintain stable heat output while supporting safety shutoff when conditions are not met. Benefits include dependable performance, improved operational safety, and consistent heat management. Its practical design supports straightforward integration and helps maintain efficient, reliable equipment operation over time.

Category:

Tag: #JohnsonControls #H91CA-21D #HotTopValveCCTPilotFittings #JohnsonControlsparts

Description: The Johnson Controls H91DA-7 solenoid valve is a 1/2" electrically operated valve designed to regulate the on-and-off flow of water or compatible fluids using a 120V power supply. It works by energizing an internal solenoid coil that opens the valve when power is applied and closes it when power is removed, allowing precise and automatic flow control. This operation supports consistent system performance and responsive operation. Benefits include reliable shutoff, reduced manual intervention, and improved efficiency in fluid management. Its compact design allows straightforward installation while helping maintain stable operation and protecting connected components.

Category:

Tag: #Johnson #H91DA-7 #ControlsSolenoidValve #Johnson parts

Description: The Holman 115146 hi-limit thermostat is a manual reset safety control designed to interrupt power when temperatures reach 190°F, helping prevent overheating conditions. It works by monitoring internal temperature and opening the electrical circuit once the preset limit is exceeded, stopping heat output until the reset is manually engaged. Featuring 1/4" tab terminals and mounting holes, it installs securely and connects easily within compatible systems. Benefits include improved equipment safety, controlled temperature protection, and dependable response during abnormal heat conditions. Its straightforward design supports consistent operation, reduces the risk of component damage, and helps maintain safe working conditions in foodservice environments.

Category:

Tag: #Holman #115146 #LimitTypeManualResetHoles #Holmanparts

Description: The Holman 197900 oven quartz heater tube is an electric heating component designed to operate at 208 volts and 800 watts, producing controlled heat for cooking and warming applications. It works by passing electrical current through the quartz tube, which generates and evenly distributes radiant heat across the oven chamber. This process helps maintain stable temperatures and uniform heat coverage during operation. Key benefits include dependable heat output, efficient energy use, and smooth integration with compatible oven systems. Its design supports steady performance in daily use, helping reduce temperature fluctuations, support consistent results, and minimize equipment downtime during service or replacement.

Category:

Tag: #Holman #197900 #OvenQuartzHeaterTube

Description: The Holman 198066 heating element is an electrical replacement component designed for use in compatible QCS-series toasters operating at 208 volts and 540 watts, single phase. It functions by converting electrical energy into controlled radiant heat, which is evenly distributed across the heating zone to ensure reliable browning and cooking results. This element helps maintain proper operating temperatures during continuous use, supporting uniform output. Key benefits include dependable heat recovery, consistent performance, and straightforward installation that helps reduce service time. Its construction is suited for routine operation in busy foodservice environments, contributing to reliable toaster operation and minimized downtime.

Category:

Tag: #Holman #198066 #HeatingElementToaster #Holmanparts

Description: The Holman 7901 ceramic end-to-end quartz element is a heating component designed for commercial cooking equipment operating at 208 volts. It works by converting electrical energy into radiant heat through a quartz tube supported by ceramic ends, allowing even heat distribution across the cooking surface. This design helps maintain stable temperatures and promotes uniform results during operation. Benefits include dependable heat output, quick response time, and straightforward replacement to help minimize downtime. Its durable construction supports regular use in demanding foodservice environments while contributing to reliable equipment performance and consistent cooking results.

Category:

Tag: #Holman #7901 #CeramicEndtoEndQuartzElement #Holmanparts

Description: The Accutemp AT1E-2652-1 water sensor probe is a monitoring component designed to detect the presence and level of water within compatible cooking or steaming equipment. It works by sensing conductivity when water contacts the probe, sending a signal to the control system to allow or restrict operation based on proper water conditions. This process helps prevent dry operation and supports efficient heating performance. Key benefits include improved equipment protection, reliable system feedback, and reduced risk of downtime caused by low-water conditions, making it a practical replacement part for maintaining dependable daily use.

Category:

Tag: #Accutemp #AT1E-2652-1 #WaterSensorProbe

Description: The Accutemp AT1E-2647-1 oven pressure switch is a control component designed to monitor pressure levels and respond when preset limits are reached. It works by opening or closing an electrical circuit through its three tab terminals as pressure changes, signaling the equipment to adjust operation accordingly. Rated at 3 amps, the switch helps ensure proper airflow and pressure balance during cooking or steaming cycles. Key benefits include improved operational safety, consistent equipment performance, and protection of internal systems, making it a practical replacement part for maintaining dependable daily operation.

Category:

Tag: #Accutemp #AT1E-2647-1 #OvenPressureSwitchTabTerminalsSteamer

Description: The Accutemp AT1G-2633-1 griddle door gasket is a replacement sealing component designed to fit securely around the door perimeter. It works by compressing when the door is closed, helping to contain heat within the cooking chamber while limiting air leakage. This controlled seal supports stable temperatures and reduces heat loss during operation. Made for commercial kitchen environments, the gasket assists in protecting internal components from excess exposure and helps equipment operate as intended. Benefits include improved energy efficiency, more consistent cooking conditions, and reduced wear on surrounding parts, supporting dependable daily performance with straightforward maintenance.

Category:

Tag: #Accutemp #AT1G-2633-1

Description: The Accutemp AT1H-2058-3 solid brass edgemount hinge is designed to support doors and panels while maintaining consistent movement and structural stability. It works by mounting directly to the equipment edge, allowing controlled pivoting with an offset that supports proper clearance and alignment. Constructed from solid brass and rated for temperatures up to 500°F, it is suited for demanding thermal environments. The hinge helps reduce stress on doors, supports even weight distribution, and promotes long-term functionality. Benefits include dependable performance under heat, improved door operation, and reduced maintenance needs, helping equipment remain safe, functional, and properly sealed during daily use.

Category:

Tag: #Accutemp #AT1H-2058-3

Description: The Accutemp AC-4115-1 stainless steel handle is a durable replacement handle designed for valves with 1/2" and 2" draw configurations in commercial equipment. It works by attaching securely to the valve stem, allowing operators to manually open or close the valve with steady leverage and precise control. The stainless steel construction supports strength and resistance to corrosion in demanding kitchen environments. Benefits include improved handling comfort, reliable valve engagement, and reduced wear during repeated use. Replacing a damaged or worn handle helps maintain proper flow control, supports safe operation, and contributes to efficient, uninterrupted equipment performance in professional foodservice settings.

Category:

Tag: #Accutemp #AC-4115-1 #StainlessSteelHandleForDrawOfValves

Description: The Accutemp AT0H-1455-2 knob is a control component designed to interface with compatible commercial kitchen equipment controls, allowing operators to manually adjust functions such as temperature or operating modes. It works by securely fitting onto a control shaft, translating rotational movement into accurate adjustments of the internal control mechanism. This direct, hands-on operation supports consistent performance and user confidence. Benefits include improved ease of use, clear control feedback, and dependable engagement during frequent adjustments. Replacing a worn or damaged knob helps maintain proper equipment functionality, supports operator safety, and ensures smooth, uninterrupted operation in professional foodservice environments.

Category:

Tag: #Accutemp #AT0H-1455-2 #Knob

Description: The Wells 54228 DPST switch is a double-pole, single-throw electrical switch designed for use in commercial foodservice equipment where reliable on/off control is required. It works by simultaneously opening or closing two electrical circuits, allowing power to be safely interrupted or restored with a single action. The compact 7/8" x 1-1/2" size supports proper fit in compatible control panels and assemblies. Benefits include improved operational safety, consistent electrical performance, and dependable response during repeated daily use. Replacing a worn or faulty switch helps maintain proper equipment functionality, supports efficient operation, and reduces the risk of electrical issues in demanding commercial environments.

Category:

Tag: #Wells #54228 #SwitchDPST

Description: The Wells 2N303375UL warmer element is an electric heating component designed to operate at 240V and 1650W, supplying consistent thermal output for compatible warmers. It works by converting electrical energy into uniform heat across the element surface, helping maintain stable temperatures during holding periods. This controlled heat distribution assists in reducing cold spots and maintaining product consistency. Benefits include dependable operation during daily use, efficient heat transfer for proper food holding, and straightforward replacement to restore normal equipment function. Installing a new element helps support food quality standards, operational efficiency, and dependable performance in busy foodservice environments.

Category:

Tag: #Wells #2N303375UL #WarmerElement

Description: The Wells 66681 warmer element is a replacement electric heating component designed for use in compatible food warmers, operating on a 120V power supply and measuring 8-1/2 inches by 17-1/2 inches. It works by converting electrical energy into steady, evenly distributed heat across its surface, supporting uniform warming during operation. The included mounting screws help secure proper installation and alignment within the unit. Key benefits include reliable temperature performance, reduced risk of cold spots, and straightforward replacement during routine maintenance, helping foodservice operations maintain efficiency, food quality, and safe holding conditions throughout daily service.

Category:

Tag: #Wells #66681 #WarmerElementScrews

Description: The Wells WS50387 element assembly is a complete heating component designed with a 6-inch diameter and includes a pan box strap and mounting hardware for secure installation. It works by converting electrical energy into consistent radiant heat, evenly warming the designated area to help maintain proper serving temperatures. The integrated hardware ensures correct positioning and stable operation during daily use. Benefits include dependable heat output, simplified replacement during maintenance, and improved temperature consistency, helping reduce operational downtime while supporting food quality and efficient kitchen workflows in professional foodservice environments.

Category:

Tag: #Wells #WS50387 #ElementAssemblyPanBoxStrapMountingHardware

Description: The Wells 50387 element assembly is a complete heating component designed for use in compatible commercial warming equipment, supplied with a pan box strap and mounting hardware for secure installation. It operates by converting electrical energy into controlled radiant heat, which is evenly distributed across the warming surface to help maintain proper holding temperatures. The integrated mounting components ensure proper alignment and stability during operation. Benefits include reliable heat output, simplified installation during maintenance or replacement, and improved temperature consistency, helping reduce downtime while supporting food quality and daily kitchen efficiency in commercial environments.

Category:

Tag: #Wells #50387 #ElementAssemblyPanBoxStrapMountingHardware #Wellsparts #CommercialKitchenEquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts

Description: The Wells WS50396 warmer element is an electric heating component designed to fit compatible food warmers and holding units. Operating at 120 volts and 1200 watts, it works by converting electrical energy into consistent radiant heat across its 15-1/2" by 7-1/2" surface area. This controlled heat output supports uniform temperature distribution, reducing cold spots during service. Benefits include dependable heating performance, efficient energy use for designated warming zones, and support for food quality and safety standards. Replacing a worn or failed element helps restore normal operation and maintain overall equipment reliability.

Category:

Tag: #Wells #WS50396 #WarmerElement

Description: The TurboChef HHB-3234 Cooling Fan Service Kit is a replacement assembly designed to support effective heat management in compatible high-speed ovens. It works by drawing in and circulating air through the unit, dispersing heat generated by electrical and cooking components to maintain stable operating temperatures. This controlled cooling process helps prevent overheating and supports consistent performance during extended use. Benefits include improved reliability, reduced stress on internal parts, and smoother day-to-day operation in commercial kitchen environments. Replacing a worn or failed fan with a complete service kit also simplifies maintenance and helps minimize unexpected equipment downtime.

Category:

Tag: #Turbochef #HHB-3234 #CoolingFanServiceKit

Description: The TurboChef TBC102668 Oven Conveyor Belt is a replacement belt designed for use in compatible conveyor ovens to transport food smoothly through the heating chamber. It works by maintaining a steady, controlled motion that allows products to receive uniform heat exposure throughout the cooking cycle. Built to withstand high temperatures and continuous operation, this component helps maintain proper oven timing and workflow. Key benefits include improved cooking consistency, reduced risk of jams or uneven results, and dependable operation during busy service periods. Replacing a worn conveyor belt helps restore optimal oven function, supports efficient production, and minimizes interruptions in daily kitchen operations.

Category:

Tag: #Turbochef #TBC102668 #OvenConveyorBelt

Description: The Turbochef NGC-3020 Capacitor Kit is a replacement electrical component designed for use in compatible commercial cooking equipment to support proper power management. It works by storing and releasing electrical energy to stabilize voltage and assist circuits and motors during startup and ongoing operation. This controlled energy flow helps ensure smooth system function and reduces strain on surrounding components. Benefits include improved equipment reliability, fewer electrical interruptions, and more consistent operating cycles during daily use. Replacing worn or failing capacitors with this kit helps restore normal performance, supports efficient operation, and contributes to the long-term dependability of commercial kitchen equipment.

Category:

Tag: #Turbochef #NGC-3020 #CapacitorKit

Description: The Bloomfield 2C-49689 Clip is a compact securing component designed to hold internal parts or wiring firmly in place within compatible foodservice equipment. It functions by applying steady mechanical tension that keeps components aligned and prevents shifting caused by vibration, heat, or routine operation. By maintaining proper positioning, it helps protect surrounding parts from unnecessary wear and reduces the risk of loose connections. Benefits include improved equipment stability, smoother operation, and reduced maintenance issues over time. Installing a properly fitted clip supports correct assembly, helps maintain dependable performance, and contributes to extending the overall service life of commercial equipment.

Category:

Tag: #Bloomfield #2C-49689 #Clip

Description: The Bloomfield 2E-30570 Infinite Switch is an electrical control device designed to regulate heating elements in foodservice appliances by providing variable heat adjustment. It works by cycling electrical power on and off at timed intervals based on the control setting, allowing operators to fine-tune heat output instead of relying on fixed temperature levels. This controlled cycling helps maintain steady operating temperatures while reducing excessive energy use. Benefits include improved heat precision, smoother equipment operation, and reduced stress on heating components. Proper installation supports consistent performance, dependable temperature regulation, and efficient operation in demanding commercial kitchen environments.

Category:

Tag: #Bloomfield #2E-30570 #InfiniteSwitch

Description: The Lang 30304-06 3-Heat Rotary Switch is an electrical control component designed to regulate multiple heat levels in compatible kitchen appliances. It functions by rotating through three fixed positions, each completing a specific circuit to deliver a designated heat output to the heating system. This simple mechanical design allows operators to adjust heat quickly without complex controls. Benefits include dependable temperature control, reduced strain on heating components, and smoother day-to-day operation in busy kitchens. Replacing a worn switch with this part helps maintain proper equipment performance, minimizes downtime, and supports consistent cooking results while keeping operation straightforward and reliable.

Category:

Tag: #Lang #30304-06 #HeatRotarySwitch

Description: The Lang 11030-31 Griddle Heating Element is an electric component designed to supply controlled, even heat across the cooking surface. Operating at 480 volts and 5991 watts, it works by converting electrical energy into steady radiant heat that integrates with the griddle’s temperature controls. This process supports accurate heat recovery and stable surface temperatures during continuous use. Benefits include uniform cooking results, reduced temperature fluctuations, and dependable operation in high-demand kitchen environments. Replacing a worn or failed element helps restore proper heating efficiency, supports consistent food quality, and keeps griddle equipment functioning as intended.

Category:

Tag: #Lang #11030-31 #GriddleHeatingElement

Description: The Manitowoc 000005770 Ice Machine Water Inlet Valve ensures a steady and controlled water supply for reliable ice production. This component is a water inlet valve designed for commercial ice machines, regulating the flow of incoming water into the system. It operates by opening and closing electronically in response to signals from the control board, allowing the correct amount of water to enter during each fill cycle. Accurate water control supports consistent ice size and proper machine operation. Key benefits include dependable filling performance, reduced risk of leaks or overflow, and improved overall efficiency. Replacing a faulty inlet valve helps maintain normal operation, supports consistent ice quality, and minimizes downtime in commercial foodservice and hospitality environments.

Category:

Tag: #Manitowoc #000005770 #IceMachineWaterInletValve

Description: The Manitowoc 000001768 Ice Machine Water Dump Valve supports clean and consistent ice production by controlling water discharge during operation. This is an electrically operated dump valve designed for commercial ice machines running on 208–230V at 50–60Hz. It works by opening at specific points in the ice-making cycle to drain used water from the system, helping flush away minerals and impurities before fresh water enters. Proper timing of water release helps maintain stable operation and dependable cycle performance. Benefits include reduced scale buildup, improved ice clarity, and smoother machine function. Replacing a worn or malfunctioning valve helps restore normal operation, supports equipment efficiency, and contributes to reliable daily ice production in foodservice environments.

Category:

Tag: #Manitowoc #000001768 #IceMachineWaterDumpValve

Description: The Bally 016611 Door Wiper Gasket helps maintain proper temperature control by sealing gaps along the door edge. This component is a flexible door wiper gasket designed for use on compatible commercial refrigeration or cold storage doors. It works by forming a continuous barrier between the door and frame, reducing air exchange each time the door is closed. By limiting warm air infiltration and minimizing cold air loss, it supports consistent internal conditions during operation. Benefits include improved energy efficiency, reduced equipment workload, and more stable storage temperatures. Replacing a worn or damaged gasket helps restore proper door sealing, supports product quality, and contributes to reliable daily performance in demanding commercial environments.

Category:

Tag: #Bally #016611 #DoorWiperGasket #Ballyparts #CommercialKitchenEquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts

Description: The Dormont PS Blue Posi-Set Wheel Placement System helps maintain safe, consistent equipment positioning in commercial kitchen environments. This product is a wheel placement solution designed to guide and secure equipment casters in a fixed location, reducing unintended movement during daily operation. It works by allowing wheels to roll into molded placement cups that hold equipment steady while still permitting repositioning when service or cleaning is required. Proper wheel alignment supports stable operation and helps protect connected utilities such as gas or water lines. Benefits include improved equipment stability, reduced stress on flexible connectors, and enhanced workplace safety. This system also supports organized layouts, easier equipment management, and dependable performance in busy foodservice settings.

Category:

Tag: #Dormont #PS #BluePosiSetWheelPlacementSystem

Description: The Hobart 00-295154 mixer wire whip helps produce smooth, well-aerated mixtures for consistent food preparation results. This stainless steel wire whip is a 60-quart mixer attachment designed for whipping cream, eggs, icings, and light batters in commercial kitchens. It works by rotating rapidly to incorporate air into ingredients while evenly blending them, supporting proper texture and volume. The stainless steel construction resists corrosion and withstands frequent use and cleaning in demanding environments. Benefits include dependable whipping performance, uniform mixing, and compatibility with high-capacity mixers. Replacing a worn or damaged whip helps maintain product quality, supports efficient kitchen operations, and ensures mixers continue to perform reliably during daily foodservice production.

Category:

Tag: #Hobart #00-295154 #MixerStainlessSteel

Description: The Hobart 00-239041 dishwasher wire shelf supports efficient and consistent cleaning by securely holding items during wash cycles. This component is a silver epoxy–coated wire shelf measuring 21 inches by 26 inches, built with a 5/16-inch frame and 5/8-inch wire spacing for balanced strength and proper water flow. It works by positioning dishes, trays, or racks evenly while allowing water, detergent, and heat to circulate freely around each item. The epoxy coating helps resist corrosion in high-moisture environments and supports long-term use. Benefits include stable load support, improved wash coverage, reduced water buildup, and dependable performance. Replacing worn shelving helps maintain smooth dishwasher operation and reliable cleaning results in commercial foodservice settings.

Category:

Tag: #Hobart #00-239041 #DishwasherSilverEpoxyWireShelfSpacing #Hobartparts

Description: The Victory 50597701 archer wire shelf helps maximize organized storage while supporting proper airflow in commercial refrigeration equipment. This component is a durable wire shelf measuring 21-1/2 inches wide by 25 inches deep, constructed with a 5/16-inch frame for reliable strength. It works by resting securely on compatible shelf supports, allowing products to be evenly distributed while maintaining clear air circulation around stored items. The open-wire design promotes consistent cooling, improves visibility, and helps limit moisture buildup. Benefits include dependable load support, efficient use of interior cabinet space, easier cleaning, and flexible product arrangement. Replacing worn or damaged shelving helps maintain proper storage conditions, supports food safety practices, and ensures equipment continues to function effectively during daily operations.

Category:

Tag: #Victory #50597701 #ArcherWireShelfFrame #Victorynparts

Description: The Groen 141285 water level electrode probe helps ensure safe operation by accurately monitoring water levels in commercial steamers. This component is a threaded electrode probe designed for use in compatible NGB and steamer equipment, featuring a 3/8" MPT connection, a 1-7/8" under-threaded length, and a 3/4" insulator for proper isolation. It works by sensing the presence of water through electrical conductivity and sending a signal to the control system to regulate filling and heating functions. Proper detection helps prevent low-water conditions that can interrupt operation or damage equipment. Benefits include dependable water level monitoring, improved equipment protection, consistent steaming performance, and support for efficient, reliable daily operation in commercial foodservice environments.

Category:

Tag: #Groen #141285 #WaterLevelElectrodeProbeforNGBandSteamer #Groenparts

Description: The Curtis WC-847 2GPM inlet solenoid valve regulates water flow to support consistent and reliable equipment operation. This component is an electrically controlled valve designed for use in compatible commercial beverage and foodservice systems. It works by using an internal solenoid coil that, when energized, lifts a plunger to allow water to pass through at a controlled rate of up to two gallons per minute, then closes when power is removed. This on-demand operation helps ensure accurate water delivery during each cycle. Benefits include controlled flow, reduced risk of leaks or overfilling, and dependable performance during daily use. Replacing a worn valve helps restore proper function, supports efficiency, and minimizes downtime in commercial environments.

Category:

Tag: #Curtis #WC-847 #InletSolenoidValve #Curtisparts

Description: The Prince Castle 625-357S replacement water tube supports consistent water flow and hygienic operation in compatible commercial foodservice equipment. This component is designed to channel water efficiently from the supply to the unit, helping maintain proper performance during daily use. It works by providing a clear internal passage that allows steady water movement, while the included cleaning brush makes it easier to remove mineral buildup or residue inside the tube. Routine cleaning helps prevent clogs and uneven flow. Benefits include improved equipment reliability, simplified maintenance, and support for sanitary operating conditions. Replacing a worn or obstructed tube helps restore normal water delivery, reduce downtime, and ensure equipment continues to operate smoothly in busy kitchen environments.

Category:

Tag: #PrinceCastle #625-357S #ReplacementWaterTubeW/CleaningBrush

Description: The Carter Hoffmann 18612-0249 warmer element delivers steady heat to help maintain proper food holding temperatures in commercial warming equipment. This is a single-phase electric heating element designed for compatible units, rated at 277 volts and 1600 watts with a 16-inch by 8.5-inch heating surface. It operates by converting electrical energy into consistent radiant heat across the element, supporting even temperature distribution during use. The flag and screw terminal design allows for secure electrical connections and reliable installation. Key benefits include uniform heat output, reduced temperature fluctuations, and dependable performance during daily operation. Replacing a worn or failed element helps restore normal equipment function, supports food quality and safety standards, and ensures efficient, reliable warming in professional foodservice environments.

Category:

Tag: #CarterHoffmann #18612-0249 #WarmerElementFlagScrew #CarterHoffmannparts #CommercialKitchenEquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts

Description: The Star Mfg 2N-46660UL Food Warmer Element delivers steady heat to help maintain safe and consistent food holding temperatures. This component is an electric warmer element rated at 240 volts and 1200 watts, designed for use in compatible commercial food warming equipment. It operates by converting electrical energy into controlled, even heat that is distributed across the warming surface during operation. The 8-32 terminals allow for secure electrical connections, supporting reliable performance. Benefits include consistent heat output, reduced temperature fluctuations, and dependable operation during daily use. Replacing a worn or failed element helps restore proper warming function, supports food quality and safety standards, and ensures equipment continues to operate efficiently in professional foodservice environments.

Category:

Tag: #StarMfg #2N-46660UL #Food WarmerElementTerminals #StarMfgparts

Description: The Duke 212945 Dome Warmer Element delivers steady, controlled heat to help maintain safe and consistent food holding temperatures. This component is a dome-style electric heating element rated at 750 watts and sized at 8-1/2 inches by 16-1/2 inches for use in compatible commercial warming equipment. It works by converting electrical energy into radiant heat that spreads evenly beneath the warming dome, supporting uniform temperature distribution during operation. Female terminals provide secure electrical connections and simplify installation. Benefits include dependable heat output, reduced temperature variation, and effective coverage for dome-style warmers. Replacing a worn element helps restore proper equipment performance, supports food quality and safety standards, and ensures reliable daily operation in foodservice environments.

Category:

Tag: #Duke # 212945 #DomeWarmerElementwithFemaleTerminals #Dukeparts

Description: The Duke 212947 Corner Wired Dome Heater Element delivers steady heat to help maintain safe and consistent food holding temperatures. This component is an electric dome-style heating element rated at 240 volts and 1000 watts, designed for use in compatible commercial food warming equipment. Measuring 8-1/2 inches by 16-1/2 inches, it operates by converting electrical energy into controlled radiant heat that is directed downward to keep plated food warm during holding periods. The corner-wired configuration supports proper installation and secure electrical connection within the unit. Benefits include uniform heat coverage, dependable performance during service, and support for food quality and safety requirements. Replacing a worn or failed element helps restore normal operation and ensures warming equipment continues to function reliably in commercial foodservice settings.

Category:

Tag: #Duke #212947 #CornerWired DomeHeaterElement

Description: The Hatco R02.08.108D.00 Warmer Element 42" is designed to provide consistent heat for maintaining proper food holding temperatures in commercial warming equipment. This tubular electric heating element operates at 208 volts and 950 watts, converting electrical energy into steady, evenly distributed heat across its full 42-inch length. Even heat output helps support uniform temperature control and reduces the risk of cold spots during operation. Key benefits include reliable performance for extended holding surfaces, dependable daily operation, and effective support of food quality standards. Replacing a worn or failing element helps restore normal equipment functionality, promotes consistent warming results, and ensures commercial foodservice units continue operating efficiently and safely.

Category:

Tag: #Hatco #R02.08.108D.00 #WarmerElement #Hatcoparts

Description: The Hatco R02.08.105D.00 warmer element provides consistent heat to support proper food holding temperatures in commercial warming equipment. This new-style tubular electric heating element features a 36-inch length and a .260-inch diameter, operating at 208 volts and 800 watts for controlled performance. It works by converting electrical energy into steady, evenly distributed heat along the entire element, helping maintain uniform temperatures during use. Even heat output reduces cold spots and supports stable holding conditions. Benefits include reliable warming performance, efficient energy use for standard holding applications, and dependable operation in daily foodservice environments. Replacing a worn or failing element helps restore equipment function, maintain food quality, and support safety and operational consistency.

Category:

Tag: #Hatco #R02.08.105D.00 #NewStyleWarmerElement #Hatcoparts

Description: The Hatco R02.08.120D.00 Warmer Element provides reliable heat to support consistent food holding temperatures in commercial warming equipment. This is an electric heating element rated at 208 volts and 2050 watts, designed to replace worn or failed components in compatible units. It works by converting electrical energy into steady, evenly distributed heat that helps maintain uniform temperatures during operation. Consistent heat output reduces temperature fluctuations and helps prevent cold spots across the warming surface. Benefits include dependable day-to-day performance, effective heat recovery, and support for proper food quality and safety standards. Replacing an aging element helps restore normal equipment function, extend service life, and maintain efficient operation in busy foodservice environments.

Category:

Tag: #Hatco #R02.08.120D.00 #WarmerElement #Hatcoparts #CommercialKitchenEquipmentParts #Restaurantequipmentparts

Description: The Star Mfg 2N-300166UL Warmer Element provides steady, dependable heat to support proper food holding temperatures. This component is an electric warming element designed for use in compatible commercial warming equipment and is rated at 208 volts and 1650 watts, with mounting hardware included for secure installation. It works by converting electrical energy into consistent heat, distributing warmth evenly to help maintain stable operating conditions. Even heat output supports uniform food temperatures and reduces performance fluctuations during service. Benefits include reliable warming operation, secure fit within the unit, and suitability for routine maintenance or replacement. Installing a functioning element helps restore normal equipment performance, supports food quality standards, and ensures efficient operation in commercial foodservice environments.

Category:

Tag: #StarMfg #2N-300166UL #WarmerElement #StarMfgparts #CommercialKitchenEquipmentParts #Restaurantequipmentparts

Description: The APW 75809 Warmer Element delivers steady, dependable heat to help maintain proper food holding temperatures. This product is an electric warming element rated at 208 volts and 1610 watts, designed for use in compatible commercial warming equipment. It works by converting electrical energy into consistent thermal output, supplying even heat during operation to support stable temperature control. Reliable heat delivery helps minimize temperature fluctuations that can affect food quality. Benefits include dependable warming performance for higher-demand applications, efficient heat output during extended use, and support for food safety standards. Replacing a worn or damaged heating element helps restore normal equipment operation and ensures warming units continue to function efficiently in busy commercial foodservice environments.

Category:

Tag: #APW #75809 #WarmerElement #APWparts #CommercialKitchenEquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts

Description: The Hatco R02.08.111D.00 New Style Warmer Element 48" delivers steady heat to help maintain consistent food holding temperatures. This product is a tubular electric heating element with a .260-inch diameter, rated at 208 volts and 1100 watts, and designed for installation in compatible commercial warming equipment. It works by converting electrical energy into evenly distributed heat along its full 48-inch length, supporting uniform temperature control during operation. Balanced heat output helps minimize cold spots and maintain stable holding conditions. Benefits include reliable warming performance, suitable coverage for longer warming surfaces, and dependable operation during daily use. Replacing a worn or damaged element helps restore proper equipment function, supports food quality and safety requirements, and ensures warming units continue operating efficiently in commercial foodservice environments.

Category:

Tag: #Hatco #R02.08.111D.00 # NewStyleWarmerElement #Hatcoparts

Description: The Hatco R02.08.111D.00 New Style Warmer Element 48" delivers steady heat to help maintain consistent food holding temperatures. This product is a tubular electric heating element with a .260-inch diameter, rated at 208 volts and 1100 watts, and designed for installation in compatible commercial warming equipment. It works by converting electrical energy into evenly distributed heat along its full 48-inch length, supporting uniform temperature control during operation. Balanced heat output helps minimize cold spots and maintain stable holding conditions. Benefits include reliable warming performance, suitable coverage for longer warming surfaces, and dependable operation during daily use. Replacing a worn or damaged element helps restore proper equipment function, supports food quality and safety requirements, and ensures warming units continue operating efficiently in commercial foodservice environments.

Category:

Tag: #Hatco #R02.08.111D.00 # NewStyleWarmerElement #Hatcoparts #CommercialKitchenEquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts

Description: The Duke 212944 Food Warmer Dome Element provides consistent radiant heat to help maintain proper food holding temperatures during service. This product is an electric dome-style heating element with female terminals, measuring 8-1/2" by 16-1/2", designed for use in compatible commercial food warming equipment. It works by converting electrical energy into controlled radiant heat that is directed downward, keeping food warm without direct contact. Even heat distribution helps reduce temperature fluctuations and supports stable holding conditions. Benefits include reliable warming performance, secure terminal connections for dependable operation, and support for food quality and safety requirements. Replacing a worn or damaged dome element helps restore normal equipment function and ensures efficient, consistent performance in commercial foodservice environments. To keep your restaurant running smoothly, it's crucial to invest in a Duke Food Warmer Dome Element W/Female Terminals that ensures long-lasting performance. Tags: #Duke #212944 # FoodWarmerDomeElement #Dukeparts #CommercialKitchenEquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts Visit The WebSite: https://partsfe.ca/warmer-element208v-750w-for-duke-part-212944

Category:

Tag: #Duke #212944 # FoodWarmerDomeElement

Description: The Hatco R02.08.107D.00 New Style Warmer Element 42" provides steady heat to help maintain consistent food holding temperatures. This component is a tubular electric heating element rated at 120 volts and 950 watts with a .260-inch diameter, designed for use in compatible commercial warming equipment. It works by converting electrical energy into evenly distributed heat along its full 42-inch length, supporting uniform temperature control during operation. Balanced heat output helps reduce cold spots and maintain stable holding conditions. Benefits include reliable warming performance, effective coverage for longer warming surfaces, and dependable operation during routine daily use. Replacing a worn or damaged element helps restore proper equipment function, supports food quality and safety requirements, and ensures warming units continue operating efficiently in commercial foodservice environments. To keep your restaurant running smoothly, it's crucial to invest in a Hatco New Style Warmer Element that ensures long-lasting performance. Tags: #Hatco #R02.08.107D.00 #New Style Warmer Element #Hatcoparts #CommercialKitchenEquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts Visit The WebSite: https://partsfe.ca/warmer-element120v-950w-for-hatco-part-r0208107d00

Category:

Tag: #Hatco #R02.08.107D.00 #New Style Warmer Element #Hatcoparts #CommercialKitchenEquipmentParts

Description: The Hatco R02.08.104D.00 36" Warmer Element delivers steady heat to help maintain consistent and safe food holding temperatures. This product is a tubular electric heating element with a .260-inch diameter, designed for installation in compatible commercial warming equipment. It works by converting electrical energy into uniform heat along its entire 36-inch length, supporting even temperature distribution during operation. Consistent heat output helps minimize cold spots and maintain stable holding conditions. Benefits include dependable warming performance, suitable coverage for medium-length warming surfaces, and reliable operation during daily use. Replacing a worn or failed element helps restore proper equipment function, supports food quality and safety requirements, and ensures warming units continue to operate efficiently in commercial foodservice environments. To keep your restaurant running smoothly, it's crucial to invest in a Hatco Warmer Element that ensures long-lasting performance. Tags: #Hatco #R02.08.104D.00 36 #WarmerElement #Hatcoparts #CommercialKitchenEquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts Visit The WebSite: https://partsfe.ca/warmer-element120v-800w-for-hatco-part-r0208104d00

Category:

Tag: #Hatco #R02.08.104D.00 36 #WarmerElement #Hatcoparts

Description: The Hatco R02.08.116D.00 Warmer Element delivers reliable heat to help maintain consistent food holding temperatures. This product is an electric warming element rated at 120 volts and 1725 watts, designed for installation in compatible commercial warming equipment. It works by converting electrical energy into steady thermal output, providing even heat distribution during operation. Consistent warmth supports proper temperature control and helps prevent hot or cold spots that can affect food quality. Benefits include dependable heating performance, efficient operation for higher-demand warming applications, and support for food safety standards. Replacing a worn or damaged heating element helps restore normal equipment function and ensures warming units continue to operate efficiently in commercial foodservice environments. To keep your restaurant running smoothly, it's crucial to invest in a Hatco Warmer Element that ensures long-lasting performance. Tags: #Hatco #R02.08.116D.00 #Warmer Element 120V 1725W #Hatcoparts #CommercialKitchen EquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts VisitTheWebSite: https://partsfe.ca/warmer-element120v-1725w-for-hatco-part-r0208116d00

Category:

Tag: #Hatco, #R02.08.116D.00, #Warmer Element 120V 1725W, #Hatcoparts, #CommercialKitchenEquipmentParts, #Restaurantequipmentparts, #Kitchenequipmentparts, #Foodserviceparts, #Icemachineparts, #Dishwasherparts, #Griddleparts

Description: The Carter Hoffmann 18612-0261 1PH Warmer Element delivers consistent heat to help maintain proper food holding temperatures. This product is a single-phase electric warming element designed for use in compatible commercial warming equipment and features 10-32 screw terminals for secure electrical connections. It works by converting electrical energy into steady heat when powered, allowing even heat distribution across the warming surface during operation. Reliable thermal output helps support stable temperature control and reduces fluctuations that can affect food quality. Benefits include dependable warming performance, secure terminal connections for reliable power flow, and suitability for routine replacement or maintenance. Installing a properly functioning warmer element helps restore normal equipment operation and supports efficient performance in commercial foodservice environments.

Category:

Tag: #CarterHoffmann #18612-0261 #1PH Warmer Element W/ 10-32 Screw Terminals #CarterHoffmannparts #CommercialKitchen EquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts

Description: The Hatco R02.08.113D.00 60" Warmer Element delivers consistent heat to support dependable food holding performance. This product is a tubular electric heating element with a .260" diameter, designed for installation in compatible commercial warming equipment. It works by converting electrical energy into evenly distributed heat along its full 60-inch length, helping maintain stable holding temperatures during operation. Uniform heat output supports proper food temperature control and reduces cold spots. Benefits include reliable warming performance, effective coverage for larger holding areas, and dependable operation during daily use. Replacing a worn or damaged element helps restore normal equipment function, supports food quality and safety standards, and ensures warming units continue to operate efficiently in commercial foodservice environments.

Category:

Tag: #Hatco #R02.08.113D.00 60 #Warmer Element .260" DIA #Hatcoparts #CommercialKitchen EquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts

Description: The Star 2N-30519UL Warmer Element provides consistent heat output to support reliable food holding performance. This product is an electric warming element rated at 120 volts and 450 watts, with an 11" x 22-1/4" heating surface designed for compatible commercial warming equipment. It works by converting electrical energy into steady heat, allowing even temperature distribution across the holding area during operation. Consistent warmth helps reduce hot and cold spots and supports proper food temperature control. Benefits include dependable heating, efficient energy use during extended operation, and support for food quality and safety standards. Replacing a worn element helps restore normal function and ensures warming equipment continues to operate efficiently in commercial foodservice environments.

Category:

Tag: #Star, #2N-30519UL, #Warmer Element 120V 450W 11" X 22-1/4, #Starparts, #CommercialKitchenEquipmentParts, #Restaurantequipmentparts, #Kitchenequipmentparts, #Foodserviceparts, #Icemachineparts, #Dishwasherparts, #Griddleparts

Description: The Hatco R02.05.006.00 Warmer Heating Element delivers consistent heat to help maintain proper food holding temperatures. This product is a compact electric heating element measuring 5" x 5", designed for installation in compatible commercial warming equipment. It works by converting electrical energy into controlled heat, evenly distributing warmth across the holding surface during operation. Steady heat output helps reduce temperature fluctuations and supports safe food holding practices. Benefits include reliable warming performance, compact sizing for precise heat placement, and dependable operation during daily use. Replacing a worn or damaged element helps restore normal equipment function, supports food quality, and ensures warming units continue to operate efficiently in commercial foodservice environments. To keep your restaurant running smoothly, it's crucial to invest in a Hatco Warmer Heating Element that ensures long-lasting performance. Tags: #Hatco #R02.05.006.00 #Warmer Heating Element 5" X 5" #Hatcoparts #CommercialKitchen EquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts VisitTheWebSite: https://partsfe.ca/warmer-element120v-325w-5-dia-x-5h-for-hatco -part-r020500600

Category:

Tag: #Hatco, #R02.05.006.00, #Warmer Heating Element 5" X 5", #Hatcoparts, #CommercialKitchenEquipmentParts, #Restaurantequipmentparts, #Kitchenequipmentparts, #Foodserviceparts, #Icemachineparts, #Dishwasherparts, #Griddleparts

Description: The Metal Masters 301674 1PH Warmer Element provides reliable heat output to help maintain consistent food holding temperatures. This product is a single-phase electric warming element designed for use in compatible commercial warming equipment and features 14" x 8" screw terminals for secure electrical connections. It works by converting electrical energy into heat when power is applied, allowing steady and even heat transfer during operation. Proper heating supports stable temperature control and helps prevent food from cooling prematurely. Benefits include dependable performance, secure terminal mounting for reliable power flow, and suitability for routine replacement or maintenance. Installing a properly functioning warmer element helps restore normal equipment operation and supports efficient performance in commercial foodservice environments. To keep your restaurant running smoothly, it's crucial to invest in a Metal Masters Warmer Element W/ 14" X 8" screw Terminals that ensures long-lasting performance. Tags: #MetalMasters #301674 #1PH Warmer Element W/ 14" X 8" screw Terminals #MetalMastersparts #CommercialKitchen EquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts Visit The WebSite: https://partsfe.ca/warmer-element118v-750w-for-duke-part-212943

Category:

Tag: #MetalMasters #301674 #1PH Warmer Element W/ 14" X 8" screw Terminals #MetalMastersparts #CommercialKitchen EquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts

Description: The Duke 212943 Warmer Element delivers steady heat to support safe and consistent food holding. This product is an electric warming element rated at 118 volts and 750 watts, designed for installation in compatible commercial warming equipment. It works by converting electrical current into thermal energy, providing even heat distribution across the unit during operation. Consistent heating helps maintain proper serving temperatures and reduces temperature fluctuations. Benefits include reliable performance during extended holding periods, support for food quality and safety, and dependable operation as part of routine equipment maintenance. Replacing a faulty or worn element helps restore normal heating function, allowing warming equipment to continue operating efficiently in demanding foodservice environments. To keep your restaurant running smoothly, it's crucial to invest in a Duke Warmer Element that ensures long-lasting performance. Tags: #Dukef #212943#OvenVoltageRelay24VDC #Dukeparts #CommercialKitchen EquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts Visit The WebSite: https://partsfe.ca/warmer-element118v-750w-for-duke-part-212943

Category:

Tag: #Duke, #212943, #Oven Voltage Relay 24VDC, #Dukeparts, #CommercialKitchenEquipmentParts, #Restaurantequipmentparts, #Kitchenequipmentparts, #Foodserviceparts, #Icemachineparts, #Dishwasherparts, #Griddleparts

Description: The Turbochef 101272 Oven Voltage Relay supports reliable electrical switching to help maintain proper oven operation. This part is a 24VDC voltage relay used in commercial oven control systems to manage the flow of electrical power between circuits. It works by receiving a low-voltage control signal that activates internal contacts, allowing higher-voltage components to turn on or off at the correct times during operation. Controlled switching helps protect sensitive electronics and ensures proper system sequencing. Benefits include improved electrical safety, consistent equipment performance, and reduced risk of damage from improper power delivery. Replacing a faulty relay helps restore normal operation and supports dependable performance during daily oven use. To keep your restaurant running smoothly, it's crucial to invest in a Turbochef Oven Voltage Relay that ensures long-lasting performance. Tags: #Turbochef#101272 #OvenVoltageRelay24VDC #Turbochefparts#CommercialKitchen EquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts Visit The WebSite: https://partsfe.ca/voltage-relay-for-turbo-chef-part-101272

Category:

Tag: #Turbochef#101272 #OvenVoltageRelay24VDC #Turbochefparts#CommercialKitchen EquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts

Description: The Garland 4522264 Range Dual Burner Venturi Housing helps regulate airflow to support consistent and efficient burner operation. This product is a dual burner venturi housing equipped with an adjustable air shutter, designed for use in commercial range applications. It works by pulling in the correct amount of air and mixing it with gas before ignition, while the air shutter allows adjustment to achieve proper combustion. Balanced air and gas flow helps produce a steady flame and reliable heat output during cooking. Benefits include improved burner efficiency, more stable ignition, and reduced risk of uneven flames. This venturi housing is a practical replacement component that supports proper performance and routine maintenance of commercial range equipment. To keep your restaurant running smoothly, it's crucial to invest in a Garland Range Dual Burner Venturi Housing W/ Air Shutter that ensures long-lasting performance. Tags: #Garland #4522264 # RangeTopBurnerValve #Garlandparts #CommercialKitchenEquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts Visit The WebSite: https://partsfe.ca/venturi-dual-for-garland-part-4522264

Category:

Tag: #Garland #4522264 # RangeTopBurnerValve #Garlandparts #CommercialKitchenEquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts

Description: The Vulcan Hart 00-408379-00004 Range Top Burner Valve ensures controlled gas delivery for steady and adjustable cooking temperatures. This part is a gas burner valve used in commercial range top applications, designed to regulate the flow of gas to an individual burner. It works by responding to the operator’s control input, opening or restricting the internal passage to adjust flame intensity during use. Proper regulation supports consistent heat output and reliable ignition. Benefits include improved cooking control, enhanced operational safety, and reduced gas waste from improper flow. Replacing a worn or faulty valve helps restore normal burner performance and supports dependable daily operation in commercial kitchen environments without altering existing equipment setup.

Category:

Tag: #VulcanHart #00-408379-00004 # RangeTopBurnerValve #VulcanHartparts #CommercialKitchenEquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts

Description: The Vulcan Hart 00-408379-00004 Range Top Burner Valve ensures controlled gas delivery for steady and adjustable cooking temperatures. This part is a gas burner valve used in commercial range top applications, designed to regulate the flow of gas to an individual burner. It works by responding to the operator’s control input, opening or restricting the internal passage to adjust flame intensity during use. Proper regulation supports consistent heat output and reliable ignition. Benefits include improved cooking control, enhanced operational safety, and reduced gas waste from improper flow. Replacing a worn or faulty valve helps restore normal burner performance and supports dependable daily operation in commercial kitchen environments without altering existing equipment setup.

Category:

Tag: #VulcanHart , #00-408379-00004 # RangeTopBurnerValve, #VulcanHartparts, #CommercialKitchenEquipmentParts, #Restaurantequipmentparts, #Kitchenequipmentparts, #Foodserviceparts, #Icemachineparts, #Dishwasherparts, #Griddleparts

Description: The Vulcan Hart 00-881984 Range 3/4" Angle Valve allows precise control of gas flow to help ensure safe and consistent range operation. This product is a manual gas shutoff valve designed for use with commercial cooking equipment. It works by opening or closing the gas line through a simple turn mechanism, allowing gas to flow during normal operation or be fully shut off for servicing and safety purposes. Proper gas regulation supports stable burner performance and reliable ignition. Benefits include improved operational safety, easier equipment maintenance, and dependable gas control. The angled configuration supports convenient installation in confined spaces, making it a practical replacement component for maintaining proper gas supply management in commercial kitchen environments. To keep your restaurant running smoothly, it's crucial to invest in a Vulcan Hart that ensures long-lasting performance. Tags: #Vulcan Hart #00-881984 # Range 3/4" Angle Valve #Vulcan Hartparts #CommercialKitchenEquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts Visit The WebSite: https://partsfe.ca/valvesteam-control-34elbo-for-vulcan-part-00-881984

Category:

Tag: #Vulcan Hart #00-881984 # Range 3/4" Angle Valve #Vulcan Hartparts #CommercialKitchenEquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts

Description: The CMA Dishmachines 00425.24 Chemical Tubing ensures steady and controlled transfer of cleaning chemicals for reliable dishwashing results. This item is a white flexible chemical tubing provided in a 50-foot coil, intended for use with commercial dishmachine dispensing systems. It works by channeling detergents, sanitizers, or rinse agents from chemical containers directly to the machine, allowing accurate and consistent dosing during operation. Proper flow helps maintain effective wash cycles and sanitation standards. Benefits include dependable chemical delivery, compatibility with common dishwashing solutions, and flexibility that supports easy installation and replacement. This tubing is a practical component for routine maintenance, helping support consistent performance and hygienic operation in commercial kitchen environments. To keep your restaurant running smoothly, it's crucial to invest in a CMA Dishmachines Chemical Tubing that ensures long-lasting performance. Tags: #CMA Dishmachines #00425.24 #Chemical Tubing White 50' Coil #CMA Dishmachines parts #CommercialKitchenEquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts Visit The WebSite: https://partsfe.ca/tubing-white50ft-roll-for-cma-dishmachines-part-0042524

Category:

Tag: #CMA Dishmachines #00425.24 #Chemical Tubing White 50' Coil #CMA Dishmachines parts #CommercialKitchenEquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts

Description: The Pitco P6072186 Fryer Tube Screen helps maintain smooth oil flow by keeping food debris out of the fryer tube system. This component is a square metal screen designed to fit securely within compatible fryers, providing coverage across a 17-1/2" by 17-1/2" area. It works by filtering crumbs and sediment from the oil as it circulates, allowing heat to transfer efficiently while reducing buildup inside the tubes. Proper filtration supports consistent cooking temperatures and stable fryer operation. Benefits include reduced risk of clogs, easier routine cleaning, and protection of internal components from damage, helping extend equipment service life and support dependable performance in busy commercial kitchen environments. To keep your restaurant running smoothly, it's crucial to invest in a Pitco Fryer Tube Screen that ensures long-lasting performance. Tags: #Pitco #6072186 #Fryer Tube Screen #Pitcoparts #CommercialKitchenEquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts Visit The WebSite: https://partsfe.ca/tube-screen17-12-x-17-12-for-pitco-part-p6072186

Category:

Tag: #Pitco, #P6072186 #Fryer Tube Screen, #Pitcoparts, #CommercialKitchenEquipmentParts, #Restaurantequipmentparts, #Kitchenequipmentparts, #Foodserviceparts, #Icemachineparts, #Dishwasherparts, #Griddleparts

Description: The Kolpak 242091075 Refrigerator Door Trim Header supports proper door alignment and helps maintain an effective seal for consistent refrigeration performance. This part is a door trim header designed to install at the top of a 36-1/2 inch refrigerator door opening, providing structural support and a finished edge. It works by holding the door assembly in correct position, allowing the gasket to seal evenly when the door is closed and opened during normal use. Proper fit helps reduce air leaks and supports stable internal temperatures. Benefits include improved energy efficiency, reduced strain on door components, and protection of the door frame from wear, making it a practical replacement component for routine service and maintenance.

Category:

Tag: #Kolpak, #242091075, #Refrigerator Door Trim Header, #Kolpakparts, #CommercialKitchenEquipmentParts, #Restaurantequipmentparts, #Kitchenequipmentparts, #Foodserviceparts, #Icemachineparts, #Dishwasherparts, #Griddleparts

Description: The Intermetro RPC13-183 Transformer provides reliable voltage conversion to support consistent operation of compatible Intermetro equipment. This component is an electrical transformer designed to step incoming power to the correct voltage and current levels required by the system, helping protect internal components from electrical stress. It works by using electromagnetic induction to transfer energy between windings, ensuring stable and controlled power delivery during normal use. The transformer supports dependable performance in commercial environments where steady power is necessary for daily operations. Benefits include improved electrical safety, reduced risk of damage from power fluctuations, and support for efficient equipment function, making it a practical replacement or maintenance part for maintaining proper system operation.

Category:

Tag: #Intermetro #RPC13-183#Transformer#Intermetroparts#CommercialKitchenEquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts

Description: The Frymaster 8070800 enclosed coil transformer is an electrical component designed to convert a 120V primary input into a 24V secondary output for control circuits and internal system functions. It works through electromagnetic induction, safely reducing voltage while providing electrical isolation between input and output. The enclosed coil design helps shield internal windings from heat, grease, and vibration commonly present in foodservice environments. Featuring two mounting holes, it allows for secure and straightforward installation. This transformer helps maintain consistent electrical performance, supports system reliability, and assists in reducing downtime caused by unstable voltage conditions.

Category:

Tag: #Frymaster #8070800 #Enclosed Coil Transformer #Frymastetparts #CommercialKitchenEquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts

Description: he Hobart 00-719197 Top Burner Valve is a manually operated gas valve designed to regulate gas flow to a top burner in compatible commercial cooking equipment. It works by opening or closing an internal passage with a simple turn, allowing gas to flow when the valve is open and stopping it completely when closed. The 1/8" MPT x 3/8"-27 connections provide a secure, stable fit for proper installation. This valve helps maintain steady ignition, improves temperature control, and supports routine maintenance by replacing worn components, reducing downtime and promoting reliable day-to-day operation.

Category:

Tag: #Hobart #00-719197 #BurnerValve #Hobartparts #CommercialKitchenEquipmentParts #Restaurantequipmentparts #Kitchenequipmentparts #Foodserviceparts #Icemachineparts #Dishwasherparts #Griddleparts

Description: The Hatco 02.09.243.00 11-5/8" x 4" Toaster Element with Brackets is a high-quality replacement heating element designed for use in Hatco commercial toasters. Measuring 11-5/8 inches by 4 inches, this element delivers consistent and efficient heat for reliable toasting performance in busy foodservice environments. Included mounting brackets make installation straightforward, ensuring a secure fit and proper alignment within the toaster assembly. Manufactured to exact OEM specifications, this element is built to withstand frequent use and high-temperature conditions, helping maintain even browning and reducing downtime due to worn components.

Category:

Tag: #02.09.243.00, #Hatco, #ToasterElementwithBrackets, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Beverage Air 502-171A Refrigerator Defrost Timer (120V, 60Hz) is a reliable OEM replacement component designed to regulate the defrost cycle in commercial refrigeration units. Built to precise specifications, this timer ensures your Beverage Air refrigerator automatically initiates and terminates defrost cycles at the appropriate intervals, preventing excessive frost build-up and maintaining optimal cooling performance. Operating at 120 volts and 60 hertz, it’s suitable for standard U.S. commercial kitchen electrical systems. Durable and engineered for long-lasting performance, the defrost timer helps protect refrigerated goods by promoting consistent temperatures and efficient operation.

Category:

Tag: #502-171A, #BeverageAir, #RefrigeratorDefrostTimer, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Hobart 00-108197-00005 Slicer 3/8" Carriage Thumb Screw is a genuine OEM replacement fastener designed to ensure secure and reliable operation of Hobart commercial food slicers. Engineered for precise fit and dependable performance, this thumb screw is used to fasten and adjust the slicer carriage assembly, helping maintain proper alignment and smooth sliding action during operation. Featuring a 3/8-inch size, it allows for easy hand tightening and removal without the need for tools, making routine adjustments, cleaning, and maintenance quick and efficient. Manufactured from durable, high-quality materials, the screw resists wear and loosening under frequent use in demanding kitchen environments.

Category:

Tag: #00-108197-00005, #Hobart, #Slicer3/8"CarriageThumbScrew, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Cadco 60019TH Oven Thermostat is a precision temperature control component designed to ensure reliable performance in commercial and residential ovens. Equipped with a 1/8" x 9" bulb D-stem and rated T150, this thermostat offers accurate temperature sensing and consistent regulation up to high heat settings. The extended 9-inch bulb stem provides flexibility in installation and precise heat detection deep within the oven cavity, helping maintain even cooking temperatures for superior results. Built with durable materials and engineered for performance, the Cadco 60019TH delivers long-lasting service even in demanding kitchen environments.

Category:

Tag: #60019TH, #Cadco, #OvenThermostat, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Garland 224022 BJ Thermostat Knob is a high-quality control knob designed for dependable temperature adjustments on commercial cooking equipment. With a 1-15/16 inch diameter, the knob is easy to grip and turn, providing smooth and accurate settings for operators. Marked with clear temperature positions—OFF, LOW, 250°F, and 500°F—it delivers intuitive control over your appliance’s heating elements. The knob features an 11/16" mount and a 1-3/16" protrusion, ensuring compatibility with a range of thermostat shafts while offering comfortable reach and operation. Built to withstand the demanding conditions of professional kitchens, this thermostat knob is crafted from durable, heat-resistant materials that resist wear and tear.

Category:

Tag: #224022, #Garland, #BJThermostatKnob, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Imperial 36302 Black Thermostat Indicator Knob is a durable and reliable replacement component designed for precise temperature control on commercial cooking equipment. Measuring 1-3/8 inches in diameter, this knob offers a comfortable grip for smooth and accurate adjustments. It features a 1/4" round mount, ensuring a secure fit on compatible thermostat shafts and allowing for quick, hassle-free installation. The clear indicator marking provides easy visibility, helping operators set and monitor temperatures with confidence. Constructed from high-quality, heat-resistant material, the knob is built to withstand the demanding conditions of commercial kitchens, including frequent use and high temperatures.

Category:

Tag: #36302, #Imperial, #BlackThermostatIndicatorKnob, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Waring/Qualheim 030013 Thermostat is a reliable temperature control component designed for use in commercial foodservice and countertop cooking equipment. Featuring a 3" x 3/16" sensing bulb and a 60" capillary tube, it delivers accurate and responsive temperature regulation essential for consistent cooking and heating performance. This thermostat helps maintain precise control over a wide range of temperatures, ensuring food is cooked or held at the desired level without fluctuations.

Category:

Tag: #030013, #Waring/Qualheim, #Thermostat3"X3/16"Blub60"CAP, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Nemco 45764A 340° Warmer Thermostat is a dependable temperature control designed to maintain consistent heat in commercial warming equipment. Engineered for precision and durability, this thermostat regulates temperatures up to 340°F, making it ideal for holding and warming a variety of foods while preserving quality and safety. Its accurate sensing ensures stable temperature control, helping prevent overheating and reducing energy waste. Built to withstand the rigors of busy kitchens, this thermostat is a reliable replacement part for compatible Nemco warmers and similar foodservice equipment.

Category:

Tag: #45764A, #Nemco, #340°WarmerThermostat, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Groen CROWN-9126-1 Oven Thermostat is a precision temperature control designed to deliver consistent and reliable heat regulation in commercial cooking equipment. Featuring an adjustable temperature range of 140°F to 284°F, this thermostat ensures accurate control for a wide variety of cooking and holding applications. It is equipped with a 36-inch capillary tube, allowing flexible installation and proper sensing within the oven cavity for dependable temperature feedback. Built for durability in demanding commercial kitchen environments, the CROWN-9126-1 helps maintain uniform cooking temperatures, improving food quality and operational efficiency.

Category:

Tag: #CROWN-9126-1, #Groen, #Thermostat140-284°F36"Capillary, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Continental Refrigerator 4-748 Refrigerator Temperature Control is a reliable and precise component designed to maintain optimal cooling performance in commercial refrigeration equipment. Engineered for consistent temperature regulation, this control helps ensure food safety, product freshness, and energy-efficient operation. It accurately monitors internal cabinet temperatures and cycles the refrigeration system as needed to maintain the desired set point. Built with durability in mind, the 4-748 temperature control is suitable for the demanding conditions of commercial kitchens, restaurants, and food service operations.

Category:

Tag: #4-748, #ContinentalRefrigerator, #RefrigeratorTemperatureControll, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Frymaster 8100159 Fryer Thermopile is a dependable replacement sensor designed for commercial gas-fired fryers and compatible cooking equipment. Featuring a 36-inch length and two leads, this thermopile generates a millivolt output of 250–750 mV, converting heat from the pilot flame into an electrical signal that helps control gas valves and ensure safe, consistent operation. It’s built to meet OEM standards for Frymaster appliances and works with many other commercial kitchen systems that require reliable flame detection and temperature feedback.

Category:

Tag: #8100159, #Frymaster, #Fryer36Thermopile2Lead, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Vulcan Hart 00-722158 Fryer Thermopile is a high-quality replacement part designed for commercial gas fryers and similar cooking equipment, ensuring reliable flame sensing and temperature feedback. This 36-inch, 2-lead thermopile generates a millivolt signal in the 250 °F to 750 °F (250 – 750 mV) range, helping control gas valves and maintain safe, efficient operation of the fryer’s pilot system.It’s built to OEM specifications for compatibility with Vulcan Hart models and many other commercial appliances, making it a versatile choice for busy kitchens and service technicians.With its robust construction and straightforward installation, this thermopile supports consistent performance and long service life in demanding food-service environments.

Category:

Tag: #00-722158, #VulcanHart, #Fryer36Thermopile2Lead, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Vulcan Hart Thermopile (Part #00-410839-00004) is a 36-inch, 2-lead thermopile designed as a reliable OEM replacement for Vulcan Hart commercial gas fryers and similar cooking equipment. It senses heat from the pilot flame and generates a millivolt signal (250 – 750 mV) to help control gas valves safely and efficiently, ensuring consistent flame detection and temperature feedback for proper fryer operation. Built to OEM specifications, this thermopile offers dependable performance in busy kitchen environments and aids in maintaining equipment safety and efficiency. Its two-lead design and generous lead length make installation straightforward for service technicians and maintenance teams.

Category:

Tag: #00-410839-00004, #VulcanHart, #Fryer36Thermopile2Lead, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Southbend 1056400 Braising Pan Coaxial Thermopile (36", 250–750 mV) is a durable replacement sensor designed for use in commercial gas cooking equipment, especially Southbend braising pans and similar appliances. It features a 36-inch coaxial thermopile that generates a millivolt signal (250–750 mV) proportional to heat from the pilot flame, helping control and monitor the burner safely and efficiently. This part typically connects with 3/8?-32 threaded fittings and is compatible with several gas valve systems like Robertshaw, making it a reliable OEM replacement for maintaining consistent temperature regulation and flame sensing in high-use kitchen environments.

Category:

Tag: #1056400, #Southbend, #BraisingPanCoaxialThermopile, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Cleveland 20410 36? Thermopile is a durable and reliable millivolt power-generating sensor designed for commercial gas-fired kitchen equipment. This 36-inch, two-lead thermopile produces a 250–750 mV output, providing consistent voltage to gas controls and valve systems for safe and efficient operation. It is engineered to replace the OEM part in many Cleveland fryers, steam generators, and related appliances, helping ensure proper flame sensing and dependable performance. Built to withstand the demanding heat and continuous use of professional kitchens, the Cleveland 20410 thermopile supports secure pilot operation and accurate temperature feedback, reducing the risk of flame failure. Easy to install with standard two-lead wiring, it’s an ideal replacement part for routine maintenance, repairs, and extended equipment life.

Category:

Tag: #20410, #Cleveland, #36"Thermopile2Lead250-750MV, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Thermocouple, Baso?Husky 24 (also known as the Nieco 2024 Baso-Husky 24 Thermocouple) is a dependable temperature-sensing component designed for commercial foodservice and gas-fired equipment. This 24-inch Baso Husky thermocouple features a coaxial design with standard 11/32?-32 threaded connection, making it compatible with a variety of standing pilot systems and controls.It produces a millivolt output in the 20–30 mV range, allowing accurate flame detection and consistent temperature feedback to gas valves to ensure safe operation.Ideal for use in grills, broilers, fryers, and other appliances, this thermocouple helps maintain reliable ignition and prevents gas flow when a pilot flame is absent.Built to withstand the demands of commercial kitchens, it’s a practical, easy-to-install replacement part that supports long-lasting performance and safety.

Category:

Tag: #2024, #Nieco, #Baso-Husky24Thermocouple, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Southbend 4344-1 Thermocouple is a high-quality temperature sensing device designed for dependable performance in commercial cooking equipment. Measuring 48 inches in length, this thermocouple provides ample reach for accurate temperature detection in ovens, ranges, and boilers. It features a ring terminal end for secure and easy installation, ensuring a solid electrical connection with minimal effort. Built to meet the rigorous demands of professional kitchens, the 4344-1 thermocouple offers fast and precise response to temperature changes, helping maintain consistent cooking conditions and improve overall food quality. Constructed from durable materials, it withstands the high heat and frequent use typical of busy foodservice environments. Ideal as a replacement part for Southbend equipment, this thermocouple supports reliable operation and extends the life of your appliance. Whether for maintenance or repair, the Southbend 4344-1 is an essential component for temperature control.

Category:

Tag: #4344-1, #Southbend, #Thermocouple48"LongRingTerminalEnd, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Star Mfg 2E-Z2894 Grill 4-Pole Terminal Block is a durable and reliable electrical connection component designed for use in Star Manufacturing commercial grills and related foodservice equipment. Featuring a 4-pole configuration, this terminal block allows for secure and organized wiring connections, helping maintain consistent electrical performance in high-heat, high-demand kitchen environments. The unit includes two Star-sided terminals for stable mounting and dependable contact, reducing the risk of loose connections or electrical faults. Measuring 3-1/4" x 1-3/4", it offers a compact footprint that fits easily into existing equipment layouts without modification. Built from quality materials to withstand frequent use and elevated temperatures, this terminal block is ideal for repairs, replacements, or preventive maintenance. Using genuine Star Mfg replacement parts helps ensure equipment safety, reliability, and long service life. To keep your restaurant running smoothly, it's crucial to invest in a Star Mfg Grill 4-Pole Terminal Block W/ Two Star Sided that ensures long-lasting performance.

Category:

Tag: #2E-Z2894, #Star Mfg, #Grill4-PoleTerminalBlockW/TwoStarSided, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Hatco R02.16.039.00 EGO Thermostat is a durable and precise temperature control component designed for commercial foodservice equipment. Featuring a 1/4" terminal and a flat left stem, this thermostat offers reliable performance across a wide temperature range of 82–200°F (28–93°C), making it ideal for maintaining consistent heat in warming cabinets, steam tables, and other Hatco units. The failure-safe design (FSD) enhances safety by preventing overheating, ensuring your equipment operates within optimal temperature limits. Built to withstand the demands of busy kitchens, this thermostat delivers long-lasting, accurate temperature regulation to help keep food at safe serving conditions. Easy to install and compatible with Hatco systems, the R02.16.039.00 EGO Thermostat is an essential part for preserving quality, improving efficiency, and supporting food safety standards in foodservice operations.

Category:

Tag: #R02.16.039.00, #Hatco, #EGOThermostat1/4"TERMDSTEMFlatLeft, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Carter Hoffmann 18616-0040 Temperature Probe is a high-quality sensing device designed to deliver accurate temperature readings in commercial cooking and food processing applications. Engineered for compatibility with Carter Hoffmann equipment, this durable probe ensures reliable performance even in high-heat environments. Its precision sensor provides quick, consistent feedback to help maintain exact temperature control, which is essential for food safety and optimal cooking results. Built with robust materials, the probe is resistant to wear and thermal stress, making it a dependable choice for frequent use in busy kitchens.

Category:

Tag: #18616-0040, #CarterHoffmann, #TemperatureProbe, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: Order Vulcan Hart 00-715112 DPDT Red Lights Black Rocker Switch, On/off/on, 7/8" X 1-1/2" at PartsFe Canada. Shop Restaurant Equipment Parts & Accessories with best prices, same-day shipping. Fits IDR-37, IDR-49, IDR-61

Category:

Tag: #00-715112, #VulcanHart, #RedLightsBlackRockerSwitch, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Star Mfg DD-30753 Green/Brown Toggle Switch is a heavy-duty electrical control designed for reliable performance in industrial and commercial applications. Featuring a robust toggle mechanism with distinctive green and brown color coding, this switch offers clear visual identification and easy operation. It’s engineered for high-current use, rated at 30 A and compatible with 120–277 V systems, making it suitable for a wide range of equipment and power setups. The switch is designed to fit a 2-3/8? mounting hole, ensuring a secure and professional installation in panels and control boxes. Built for durability, the DD-30753 withstands frequent switching cycles and demanding operating conditions, delivering consistent and long-lasting service. Ideal for maintenance professionals and technicians, this toggle switch provides dependable control for motors, lights, and other heavy electrical loads. Whether replacing a worn component or specifying new equipment, the Star Mfg DD-30753 combines performance, versatility, and ease of use.

Category:

Tag: #DD-30753, #StarMfg, #Green/BrownToggleSwitch, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Univex 8700035 On/Off Switch is a dependable replacement part designed to restore or enhance the power control of commercial kitchen equipment. Engineered to meet original equipment specifications, this switch provides reliable performance and long-lasting durability in high-use environments. Its simple on/off functionality allows for straightforward operation, making it ideal for busy foodservice settings where quick and accurate control is essential. Built with quality materials, the Univex 8700035 resists wear and ensures consistent electrical connection over time. This switch is easy to install, helping technicians and operators minimize downtime during maintenance or repairs. Compatible with a range of Univex machines, it’s an excellent choice for maintaining optimal performance and safety in professional kitchens. Whether replacing a worn switch or upgrading existing components, the Univex 8700035 offers dependable functionality you can count on.

Category:

Tag: #8700035, #Univex, #On/OffSwitch, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Globe U03041215027 Red Lighted Rocker Switch is a reliable replacement component designed for dependable power control in commercial foodservice and electrical equipment. Featuring a durable rocker-style design with a built-in red indicator light, this switch provides clear visual confirmation when the unit is powered on, helping improve safety and ease of operation. It is equipped with 1/4" tab terminals for quick, secure electrical connections and straightforward installation. Built to withstand frequent use, the switch offers consistent performance in demanding kitchen or industrial environments. Ideal for replacing worn or faulty switches, the Globe U03041215027 helps restore proper functionality while maintaining original equipment standards. Its compact, robust construction makes it a practical choice for technicians and maintenance professionals seeking long-lasting reliability.

Category:

Tag: #U03041215027, #Globe, #RedLightedRockerSwitch, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Henny Penny 52224 Black Rocker Switch is a robust, easy-to-use power control component designed for commercial kitchen equipment and appliances. This DPST (Double Pole Single Throw) switch features a sleek black rocker with a clear On/Off action, providing reliable control of electrical circuits. Built with four 1/4" tab terminals, it ensures secure, straightforward wiring and compatibility with a variety of systems. The sturdy construction delivers long-lasting performance in demanding environments, making it ideal for frequent use in foodservice equipment such as fryers, ovens, and holding cabinets. Simple to install and maintain, this switch offers dependable electrical switching and enhanced safety for operators. Whether replacing a worn component or upgrading a machine, the Henny Penny 52224 Rocker Switch combines durability, practicality, and everyday reliability in one compact package.

Category:

Tag: #52224, #Henny Penny, #BlackRockerSwitchW/4x1/4", #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Intermetro RPC13-375 Red Rocker Power Switch is a dependable on/off control solution designed for commercial and industrial equipment. Featuring a bright red rocker with clear I/O markings, this switch provides quick visual confirmation of power status, enhancing safety and ease of operation. The durable black frame offers a clean, professional appearance while ensuring long-lasting performance in demanding environments. Supplied with two mounting screws and secure wiring terminals, installation is simple and reliable. Built for consistent electrical performance, this power switch is ideal for use in foodservice equipment, warming units, carts, and other powered appliances. Its rugged construction and intuitive design make it a practical replacement or upgrade for worn or faulty switches, helping maintain efficient and safe equipment operation with minimal downtime.

Category:

Tag: #RPC13-375, #Intermetro, #RedRockerBlackFramePowerSwitch, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Southbend 1186599 Rocker Switch is a versatile and durable electrical control component ideal for a wide range of appliances and equipment. Featuring a three-position ON/OFF/ON configuration, this switch allows easy selection between two active circuits or a neutral off position, making it perfect for reversing motors, selecting functions, or controlling multiple outputs. It comes with 6 × 1/4" tab terminals for secure, quick spade connections, ensuring reliable electrical contact and straightforward installation. Built to industry standards, the switch delivers consistent performance in commercial kitchen equipment, industrial machines, and other electrical systems where dependable control is essential. Its rugged construction stands up to frequent use and harsh environments, while the accessible rocker design provides intuitive operation.

Category:

Tag: #1186599, #Southbend, #RockerSwitchW/6x1/4"TabTerminals, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Southbend 1175300 Range Door Switch is a dependable and essential replacement part designed for residential and commercial cooking equipment. Engineered to meet OEM specifications, this switch operates at 125/250V with a 15 Amp capacity, ensuring reliable performance under typical range and oven electrical loads. It functions as a safety interlock, detecting the position of the oven or range door and controlling power to interior lights or heating elements accordingly. Built with durable materials and precise internal contacts, this door switch offers consistent operation and long service life. Easy to install, it fits seamlessly into compatible Southbend models, helping restore proper functionality and safety to your appliance. Whether you’re repairing a commercial kitchen range or a home oven, the Southbend 1175300 provides a high-quality, cost-effective solution for maintaining safe and efficient operation.

Category:

Tag: #1175300, #Southbend, #RangeDoorSwitch, #partsfe, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Cleveland SK2474500 Roller Lever Microswitch is a reliable, heavy-duty electromechanical switch designed for industrial and commercial applications. Featuring 1" mounting tab (MT) centers, this microswitch offers secure and easy installation in a variety of control systems and machinery. It is rated for 20 AMP at 125/250/480 VAC, providing high durability and dependable performance under demanding electrical loads. The precision roller lever actuator delivers smooth, consistent operation and positive actuation, making it ideal for limit sensing, safety interlocks, and automated equipment control. Built with rugged construction and quality components, the SK2474500 ensures long service life and dependable switching performance in harsh environments. Whether used for conveyor systems, packaging machines, or industrial controls, this microswitch offers a versatile and robust solution for accurate position detection and reliable circuit control.

Category:

Tag: #SK2474500, #Cleveland, #RollerLeverMicroswitch, #partsfe, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Star Mfg A8-7606396 Switch & Bracket Assembly is a high-quality replacement part engineered to ensure reliable control and safe operation of compatible Star Manufacturing commercial kitchen equipment. This complete assembly includes a durable electrical switch securely mounted on a precision-formed bracket, simplifying installation and reducing service time during repairs or routine maintenance. Designed for demanding foodservice environments, the assembly delivers consistent electrical performance and dependable durability under frequent use. The sturdy bracket provides proper alignment and secure mounting, helping maintain smooth switch operation and long service life. Ideal for equipment restoration or preventive maintenance, the Star Mfg A8-7606396 Switch & Bracket Assembly supports efficient appliance operation and helps minimize unexpected downtime in busy professional kitchens.

Category:

Tag: #A8-7606396, #StarMfg, #Switch&BracketAssemblyNo, #partsfe, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Waring/Qualheim 029478 Red Lighted Rocker Switch is a high-quality replacement component ideal for commercial appliances and foodservice equipment. Designed with a protective rubber boot, this switch offers enhanced resistance against dust, moisture, and accidental splashes, making it perfect for demanding kitchen environments. Its bright red illuminated rocker clearly indicates when a device is powered on, improving usability and safety. The switch features four 1/4-inch tab terminals for secure, easy wiring during installation or maintenance. Built for durability and frequent use, the 029478 delivers reliable performance and long service life. Its ergonomic design fits easily into standard control panels, providing technicians and maintenance professionals with a dependable solution for repairs and upgrades. Whether replacing worn components or upgrading equipment controls, the Waring/Qualheim 029478 ensures consistent operation and improved protection in busy work settings.

Category:

Tag: #029478, #Waring/Qualheim, #RedLightedRockerSwitchW/ProtectiveBoot&4x1/4"TabTerminals, #partsfe, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Waring/Qualheim 029477 Red Lighted Rocker Switch is a reliable replacement component designed for dependable on/off control in commercial foodservice and appliance applications. Featuring a bright red illuminated rocker, this switch provides clear visual indication when equipment is powered on, helping improve safety and ease of operation in busy environments. It is equipped with four 1/4-inch tab terminals, allowing for secure and straightforward electrical connections during installation or replacement. Built for durability, the switch is well-suited for frequent use and demanding conditions commonly found in professional kitchens. Its compact rocker design fits seamlessly into compatible control panels, making it an ideal choice for maintenance technicians and equipment repairs. The Waring/Qualheim 029477 switch delivers consistent performance, dependable illumination, and long-lasting service life.

Category:

Tag: #029477, #Waring/Qualheim, #RedLightedRockerSwitch4x1/4"TabTerminals, #partsfe, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Fisher Manufacturing 3000-0000 Right-Hand Stem Assembly with Seat Washer is a durable, precision-engineered replacement component designed for reliable performance in commercial foodservice equipment. This right-hand stem assembly includes a high-quality seat washer to ensure a secure seal and smooth operation, helping to prevent leaks and maintain consistent performance. Constructed with robust materials, it’s built to withstand the demands of busy kitchen environments and frequent use. Easy to install, the assembly restores proper function to worn or damaged valve systems, reducing downtime and extending the life of your equipment. Ideal for maintenance technicians and service professionals, the Fisher Manufacturing 3000-0000 assembly provides dependable performance and improved operational efficiency. Whether used in kettles, steam equipment, or other compatible applications, this component helps maintain peak performance in commercial kitchen operations.

Category:

Tag: #3000-0000, #FisherManufacturing, #RHStemAssemblyW/SeatWasher, #partsfe, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Fisher Manufacturing 3000-0001 Swivel Stem Repair Kit (Left Hand, 1/2") is a precision replacement kit designed to restore smooth and reliable operation to left-hand 1/2" swivel stem assemblies in commercial foodservice equipment. This high-quality kit includes all necessary components engineered to exact specifications, ensuring a proper fit and lasting performance. Built for durability and ease of installation, the repair kit helps eliminate leaks, stiffness, and operational issues caused by worn or damaged swivel stems. Ideal for maintenance professionals and service technicians, it supports quick and efficient repairs, reducing equipment downtime and maintaining peak performance. Whether used in steam kettles, kettles, or other kitchen apparatus with compatible swivel stems, the Fisher Manufacturing 3000-0001 kit delivers dependable service, improved functionality, and extended equipment life, making it an essential part for ongoing maintenance and repair programs.

Category:

Tag: #3000-0001, #Fisher Manufacturing, #Swivel Stem Repair Kit Left Hand 1/2", #partsfe, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Groen 144847 21-1/4" Long Steel Burner with Air Shutter is a high-quality replacement component designed to deliver consistent and efficient combustion in compatible Groen commercial cooking equipment. Constructed from durable steel, this burner is built to withstand high operating temperatures and demanding kitchen environments. The integrated air shutter allows precise adjustment of the air-to-gas mixture, ensuring optimal flame stability, improved fuel efficiency, and reduced emissions. Measuring 21-1/4 inches in length, it is engineered for accurate fit and reliable performance, helping restore proper heating and even heat distribution across the appliance. Ideal for maintenance and repair applications, the Groen 144847 burner supports safe operation and dependable cooking results, making it a trusted choice for commercial kitchens seeking long-lasting performance and efficient burner operation.

Category:

Tag: #144847, #Groen, #Long steel Burner W/ Air Shutter, #partsfe, #PartsFeCanada, #partsfebuzz, #restaurantowner, #restaurantequipmentparts

Description: The Star 2E-70851 Rocker Switch provides dependable on/off control for compatible electrical equipment, helping ensure consistent performance in everyday operation. This DPST switch features a 7/8" x 1-1/2" panel cutout size and functions by simultaneously opening or closing two separate circuits when the rocker is engaged, offering straightforward, reliable switching. Its simple mechanical design allows for smooth actuation, while the dual-pole configuration supports balanced load handling. To keep your restaurant running smoothly, it's crucial to invest in a Star Rocker Switch that ensures long-lasting performance.

Category:

Tag: #Star,#2E- 70851,#RockerSwitch

Description: The Garland 1019205 Rocker Switch offers reliable two-circuit control, providing a straightforward way to manage power in compatible commercial kitchen equipment. This DPST switch functions by simultaneously opening or closing two separate electrical paths, ensuring consistent operation and reducing the risk of partial power flow. Its 7/8" x 1-1/2" design fits standard panel cutouts for quick replacement and secure installation. To keep your restaurant running smoothly, it's crucial to invest in a Garland Rocker Switch that ensures long-lasting performance.

Category:

Tag: #Garland,#1019205,#RockerSwitch

Description: The Southbend 1177790 On/Off Rocker Switch DPDT provides reliable two-circuit control, ensuring smooth and consistent operation for compatible commercial kitchen equipment. This double-pole, double-throw design works by simultaneously opening or closing two independent electrical paths, allowing users to manage power flow with a single, easy-to-use rocker action. Its straightforward functionality supports quick activation, clear status indication, and efficient equipment management. To keep your restaurant running smoothly, it's crucial to invest in a Southbend On/Off Rocker Switch DPDT that ensures long-lasting performance.

Category:

Tag: #Southbend,#1177790,#RockerSwitch

Description: The Cleveland SK50680 Rocker Switch provides reliable double-pole, double-throw control with a convenient center-off position, making it an efficient solution for managing electrical functions in commercial equipment. This compact 7/8" x 1-1/2" switch operates by rocking between two active circuits, allowing users to alternate power flow safely or disengage it completely when set to the neutral midpoint. Its straightforward mechanical action ensures smooth switching, while the clearly defined off position helps prevent accidental activation. To keep your restaurant running smoothly, it's crucial to invest in a Cleveland Rocker Switch that ensures long-lasting performance.

Category:

Tag: #Cleveland,#SK50680,#RockerSwitch

Description: The Garland 2343501 Rocker Switch provides reliable on/off control for compatible commercial kitchen equipment, ensuring straightforward operation and consistent performance. Designed as a simple electrical switching component, it works by completing or interrupting the circuit when the user presses the rocker-style actuator, offering clear tactile feedback for quick adjustments during routine tasks. Its durable construction supports frequent use, while the intuitive design helps reduce downtime by making equipment control easy for staff of all experience levels. To keep your restaurant running smoothly, it's crucial to invest in a Garland Rocker Switch that ensures long-lasting performance.

Category:

Tag: #Garland,#2343501,#RockerSwitch

Description: The Duke 212280 Amber Lighted Rocker Switch provides a reliable way to control power while offering clear visual indication during operation. Designed as a single-pole, single-throw rocker, it works by opening or closing an electrical circuit with a simple press, and its built-in amber light illuminates when the switch is active for easy status monitoring. The four-tab terminals allow straightforward wiring in commercial kitchen equipment or general electrical applications, supporting 20A at 125–250VAC for dependable performance. To keep your restaurant running smoothly, it's crucial to invest in a Duke 212280 Amber Lighted Rocker Switch that ensures long-lasting performance.

Category:

Tag: #Duke,#212280,#RockerSwitch

Description: The BKI S0104 Fryer Black Rock Switch provides reliable control of fryer power and indicator functions to support consistent, safe cooking performance. This switch operates by routing electrical current through its 6x1/4" tab terminals to activate the fryer and display status using built-in red and amber lights, helping users easily monitor heating or standby modes. Its straightforward mechanical design ensures dependable function with minimal complexity, making it suitable for routine commercial kitchen use. To keep your restaurant running smoothly, it's crucial to invest in a BKI (Barbeque King) Fryer Black Rock Switch that ensures long-lasting performance.

Category:

Tag: #BarbequeKing,#S0104,#FryerBlackRockSwitch

Description: The Garland 2672200 Range Relay delivers reliable switching performance for commercial cooking equipment by controlling power flow to burners or heating elements with consistent 24 VAC operation. This relay functions as an electromechanical switch that activates when the control circuit sends a low-voltage signal, allowing the unit to safely manage higher-load components without direct manual intervention. By ensuring stable transitions between on and off states, it helps protect internal parts from electrical stress and supports smoother appliance performance. To keep your restaurant running smoothly, it's crucial to invest in a Garland Range Relay that ensures long-lasting performance.

Category:

Tag: #Garland,#2672200,#RangeRelay

Description: The Cleveland SK2475500 Relay 24VAC provides reliable electrical switching to support consistent control performance in commercial kitchen and HVAC equipment. This component functions as an electromechanical relay that uses a 24-volt AC coil to open or close circuits, allowing connected devices to operate only when required. Its straightforward design ensures stable signal handling, while the enclosed build helps protect internal contacts for dependable service life. To keep your restaurant running smoothly, it's crucial to invest in a Cleveland Relay that ensures long-lasting performance.

Category:

Tag: #Cleveland,#SK2475500,#Relay

Description: The Pitco 60104701 24V DPST Relay with 6 terminals and a 25-amp rating provides reliable switching control for commercial cooking equipment, helping ensure consistent performance and safe electrical operation. This relay functions by using a low-voltage 24V coil to open or close two separate circuits simultaneously, allowing equipment to manage power loads efficiently. Its durable, high-capacity design supports stable operation under frequent cycling, reducing downtime and maintenance needs. To keep your restaurant running smoothly, it's crucial to invest in a Pitco Relay that ensures long-lasting performance.

Category:

Tag: #Pitco,#60104701,#Relay

Description: The Blodgett 37058 Oven DPST Relay with 6 terminals delivers reliable switching performance to support stable oven operation. This 25-amp, 24-volt relay functions by opening and closing two separate circuits simultaneously, helping regulate power flow to heating components for consistent temperature control. Its durable contacts and secure terminal layout promote dependable electrical connections, reducing the risk of interruptions during high-demand use. To keep your restaurant running smoothly, it's crucial to invest in a Blodgett Oven Relay that ensures long-lasting performance.

Category:

Tag: #Blodgett,#37058,#OvenRelay

Description: The Baxter 01-1000V6-00271 Oven Relay delivers dependable switching performance to help ensure consistent control of heating elements in commercial baking equipment. This DPDT relay operates at 120V and manages loads up to 1/2 HP, functioning by opening or closing electrical circuits in response to oven control signals to support accurate temperature regulation. Its durable construction promotes reliable operation under frequent cycling, contributing to smoother oven performance and reduced downtime. To keep your restaurant running smoothly, it's crucial to invest in a Baxter Oven Relay that ensures long-lasting performance.

Category:

Tag: #Baxter,#01-1000V6-00271,#OvenRelay

Description: The Holman HO-197841 Oven 12-1/4" Ceramic Quartz Element with 11" leads delivers fast, efficient radiant heat to support consistent cooking and toasting performance. This replacement element uses ceramic-encased quartz tubing that heats quickly and transfers energy directly to food surfaces for reliable, even results. Its straightforward design allows it to integrate smoothly into compatible commercial ovens, helping restore proper temperature response without complicated installation. To keep your restaurant running smoothly, it's crucial to invest in a Holman Oven 12-1/4" Ceramic Quartz Element that ensures long-lasting performance.

Category:

Tag: #Holman,#HO-197841,#QuartzElement

Description: The Vulcan Hart 00-825301 Fryer 19-5/8" Snap-In Quartz Element with #14 wire lead delivers reliable heating performance to support consistent frying results. This quartz element functions by converting electrical energy into steady, radiant heat, helping the fryer maintain accurate temperatures during demanding kitchen operations. Its snap-in design streamlines installation, while the durable construction supports long-term use with minimal maintenance. To keep your restaurant running smoothly, it's crucial to invest in a Vulcan Hart Fryer 19-5/8" Snap-In Quartz Element that ensures long-lasting performance.

Category:

Tag: #VulcanHart,#00-825301,#QuartzElement